.NET Tutorials, Forums, Interview Questions And Answers
Welcome :Guest
Sign In
Register
 
Win Surprise Gifts!!!
Congratulations!!!


Top 5 Contributors of the Month
Easy Web
Imran Ghani
Post New Web Links

Infopath 2010 Browser Based Form Vs Infopath 2010 Filler Based Form Issue

Posted By:      Posted Date: September 01, 2010    Points: 0   Category :SharePoint
 
I have created a detailed infopath form that is connecting to multiple sharepoint lists, some of which contain thousands of rows and dozens of columns.  To tailor for the data load i have enabled the form to only pull in data as needed and on some of the lists i have created 5 or 6 data connections to the same list, each only looking at a certain set of data, and as you make your way through the form selecting your options, the data is pulled in. If i preview this form from within Infopath or if i launch it using Infopath filler this works great, the data is pulled through in under a second.  However if i then publish the form to the browser and launch it through the browser, it now takes roughly 30 seconds to pull in the data. My question is therefore this,  Is there something i can do to speed up the way the data is pulled in when launched through the browser?  are there transport protocols i can alter or something like that? maybe config in central admin or infopath config? any help would be gratefully appreciated as if i can not get the form to pull the data in fast through the browser then the whole project is a waste of time as my management team will never go for the solution if it is slow and will get slower as more data is added. thanks


View Complete Post


More Related Resource Links

Infopath 2010 Browser Based Form Vs Infopath 2010 Filler Based Form Issue

  
I have created a detailed infopath form that is connecting to multiple sharepoint lists, some of which contain thousands of rows and dozens of columns.  To tailor for the data load i have enabled the form to only pull in data as needed and on some of the lists i have created 5 or 6 data connections to the same list, each only looking at a certain set of data, and as you make your way through the form selecting your options, the data is pulled in. If i preview this form from within Infopath or if i launch it using Infopath filler this works great, the data is pulled through in under a second.  However if i then publish the form to the browser and launch it through the browser, it now takes roughly 30 seconds to pull in the data. My question is therefore this,  Is there something i can do to speed up the way the data is pulled in when launched through the browser?  are there transport protocols i can alter or something like that? maybe config in central admin or infopath config? any help would be gratefully appreciated as if i can not get the form to pull the data in fast through the browser then the whole project is a waste of time as my management team will never go for the solution if it is slow and will get slower as more data is added. thanks

Is it possible to convert an InfoPath 2010 Filler form to an InfoPath 2010 Web Browser form?

  

I have built an InfoPath Filler form that I deployed to a SharePoint 2010 Form Library.  While deploying, I checked that the form could be opened up using a web browser.  I receive a warning that the form template has been published to the server but if can only be opened in InfoPath Filler

This is a problem, because it was decided that the form would be required to be opened using the browser.  I made changes to the form so that it abided by the rules which allow it to be opened using a broswer (There were no design checker warnings or errors).

This is the second form that had this problem.  To fix it the first time, I simply created a new form that was not a filler form.  Now that it has happened again, I wonder if there is a way to convert the filler form to a web browser form to save development time.

Can this be done?  Any other suggestions?

Many thanks.

 


Attachment upload error on browser based InfoPath form

  

Hello,

I am having an interesting problem with browser based InfoPath forms in SharePoint 2007.  For some reason the file attachment control is not working any more.  It was working fine in July, but now it will not allow file attachments over a few kb.  I tried a 34KB file and I get the error below, a 2KB file works fine.

Unable to connect to SQL Server session database. The connection string (server='SPDB', database='SharedServices1_DB') was returned by an instance of the IPartitionResolver type 'Microsoft.Office.Server.Administration.SqlSessionStateResolver, Microsoft.Office.Server, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c'.   at System.Web.SessionState.SqlSessionStateStore.ThrowSqlConnectionException(SqlConnection conn, Exception e)
   at System.Web.SessionState.SqlSessionStateStore.HandleInsertException(SqlConnection conn, Exception e, Boolean newItem, String id)
   at System.Web.SessionState.SqlSessionStateStore.SetAndReleaseItemExclusive(HttpContext context, String id, SessionStateStoreData item, Object lockId, Boolean newItem)
   at System.Web.SessionState.SessionStateModule.OnReleaseState(Object source, EventArgs eventArgs)
   at System.Web.HttpApplication.SyncEven

Convert Infopath 2010 browser enabled form to PDF when Submiting

  
Hi all, Im having a infopath form browser enabled form. I need to sumbit it to a document library when submiting as a pdf. In the blogs and forums they said like you can use this.currentview.expot() but in the infopath 2010 there is no method like export, i refere the microsoft.office.infopath.server.dll (14/bin) as well. Any Idea ? Thanks in advanced

file attachment control on infopath 2010 browser form, validating event not fired

  

If preview within InfoPath 2010, the validating event is fired. But After deploying the form to SharePoint 2010, the validating event does not fire.

Any ideas?

Thanks.


Blog: http://convergingpoint.blogspot.com/

Browser Based Infopath form Opening Problem

  

Hi,

 I am having some problem regarding infopath form.Actually i m using Browser based infopath form.

 I created the browser based infopath form and then i choosed full trused and added the certificate and then published with admin approved and then installed and activated from the central admin.

if client machine is having the Infopath Installed on that machine, I m facing some prob to open that infopath form on the client machine(asking windows crediantial again and again and at last the form was opended but the webservice was not retrieving the data on the infopath form) .

But if the client machine is not having the infopath installed then the infopath form is opening in single click.there is no issue in this case.

 so can u confirm me that if we are creating browser based infopath from then the client machine should not have infopath installed on that machine. Is this right?

Actually i m working on client site and lot of..... 1000 machines is here and every machine is having infopath form installed. So will every machine need uninstall of infopath?

Pls try to give me the solution.

Thanks


Regards- Sharad

Infopath 2010 browser enabled form need to save form immediately prior to submission to a different

  

Scenario

Using SharePoint 2010 and Infopath web browser admin approved forms. I have a big form that will take serveral edits over time via collaboration between two users prior to submission. I use two form libraries say WIP for work in progress and Submitted for submitted forms. There are different access permissions to the two libraries.

When a user submits a form from the WIP library to the Submitted library I want to set a flag on the WIP form to say submitted=Yes so that if they go back into the original WIP form they cannot submit a second time with the same form. I use this flag field to set a read only view of the form.

The trouble is that when I set the flag before triggering the submit then the flag is set but the current form is not saved before it is submitted as a new form to the submitted library so the flag never gets set on the current form!

Ideally I want to force a save to the WIP form immediately prior to a submission but after I set the flag field value. I am having difficulty in finding out how to do this - any suggestions? I realise that submit is a form of save but I want to simply save the current form as part of the submit action. What is happening is that the form is submitted to the other library but THIS form is not saved. I cannot depend on the user to save using the Save button.


Not able to publish an infopath 2010 Web browser form mode, Invalid form template, .xsf file not ref

  

Hi, i am migrating a infopath 2007 form from a sharepoint 2007 site to infopath 2010 form for a sharepoint 2010 site. I used the design checker to verify the form template ,I got a invalid form template error. So I went to the Resource files tab under the developer section. I edited the context.xml to my current site. After this,the design checker gave no errors.

But when i tried to preview this form, I got an erro saying

"The form template contains files that are not referenced in the form definition (.xsf) file or are referenced more than once."

Can anybody tell me where I went wrong?


Formatting problem with Email from an Browser Enabled InfoPath 2010 Form in SharePoint 2010

  

I'm creating a form in InfoPath 2010 to be filled out in the browser within our SharePoint 2010 instance. It's pretty simple, four columns with total table width of about 650 pixels, textboxes, checkboxes, datepicker and one multiselect list box. The form is working fine up to the point where I invoke a data connection which emails the form to myself. When it arrives in my inbox, the format of the form included in the body of the email is funky. When I open the email and set it to a full screen viewing window (1440X900) the area that takes up the form exceeds the width of my viewing window and requires scroll bars to see all the fields on the form.

When printing the form from my email the area is so large that no data will show up in the printable area (it appears to be centered on the form and it is cutting off the "extra content" to the left and right which contains the form data as the user entered it). I'm using Outlook 2007. I also forwarded the email to a person who's using Outlook 2010 and they experienced the same problems as myself.

Things I've tried to fix it: Setting each column width, setting each control width to a pixel length (instead of using %). I added some code behind to switch the view to a two column view with a table width of 400px before it sends out the email. It's closer to being at a state where it's

Browser based InfoPath Form - fully trusted gives Access denied Error for few users

  

We have a code-based (code behind) browser based Infopath form which is fully trusted, but it gives out an Access denied error for some users.

 

The InfoPath form is not digitally signed. Let us know if this has to be done and what is the process for the same for DEV, STAGING and PRODUCTION.

 

Error

 

Issue in Infopath 2007 browser form - cascading dropdown using owssvr.dll filter view

  

Referring the below link, I created a cascading dropdown. The parent dropdown has sharepoint list as datasource and the child dropdown has xml datasource that points to owssvr.dll filter view. The cascading drop down works fine in preview but throws error after publishing as admin approved form - "form cannot run the specified query" exception when trying to execute xml datasource i.e., when a value is selected in parent dropdown. The security is 'Full Trust". In the event viewer the error message states "401 unauthorised" for the user a/c. the xml data source is an approved udcx file and in central admin, have enabled cross domain for infopath service. I have tried different solution provided in tech forums but issue still exists. Not sure whether Im missing something. Can someone guide me in fixing this issue?

Link Reffered:

http://www.bizsupportonline.net/browserforms/filter-cascade-drop-down-infopath-sharepoint-browser-form-owssvr-dll.htm

http://www.sharepoint-tips.com/2007/01/infopath-form-services-implementing.html


Changing fields while updating an InfoPath Form to a SharePoint 2010 Document library

  
My document library has following EventReceiver: <?xml version="1.0" encoding="utf-8"?> <Elements xmlns="http://schemas.microsoft.com/sharepoint/"> <Receivers ListTemplateId="101"> <Receiver> <Name>EventReceiverDocumentLibraryItemUpdating</Name> <Type>ItemUpdating</Type> <Assembly>$SharePoint.Project.AssemblyFullName$</Assembly> <Class>EventHandling.EventReceiverDocumentLibrary</Class> <SequenceNumber>10000</SequenceNumber> </Receiver> </Receivers> </Elements> Updating a browser enabled InfoPath form in the document library fires following event: Public Overrides Sub ItemUpdated(ByVal properties As SPItemEventProperties) Try Me.EventFiringEnabled = False properties.ListItem("Lastname") = "Testperson" properties.ListItem.ParentList.ParentWeb.AllowUnsafeUpdates = True properties.ListItem.SystemUpdate(False) ' solution 1 properties.ListItem.Update() ' solution 2 properties.ListItem.UpdateOverwriteVersion() ' solution 3 properties.ListItem.ParentList.ParentWeb.AllowUnsafeUpdates = False Me.EventFiringEnabled = True MyBase.ItemUpdated(properties) Catch ex As Exception Me.EventFiringEnabled = True E

UseExplicit property in infopath with form based context

  
Hi everyone, I have a problem with my infopath form. The context, user of the site mustn't have acces to lists that provision infopath form field. Administrator should have acces to these lists. When i test the useExplicit property of udc file for impersonate the connection to the list i have no problem ( all my account are local account) But when i try to integrate user from FBA, infopath form services don't take care of the UseExplicit property and try connect to the list with the credential of the connected user ( who don't have access to the list since only the user that i use to impersonate the connection have read acces). Here is my UseExplicit property :  <udc:Authentication>    <udc:UseExplicit CredentialType="NTLM">      <udc:UserId>dev\svc-reader</udc:UserId>      <udc:Password>password</udc:Password>    </udc:UseExplicit>  </udc:Authentication>    09/06/2010 15:06:50.46                w3wp.exe (0x09BC)                                      0x1A08 SharePoint Foundation                General                      

Cannot publish InfoPath 2010 form template to SharePoint Server 2010 RC

  
Hi all, I am MSFT in Vietnam. I created a SharePoint list using InfoPath 2010 RTM 64bit. After publishing it to SharePoint 2010 RC, I see an error message:  Click on button "Show Details" the message is The list schema does not match the schema of this form. Refresh the data source and publish the form again. When I create new item based on published SharePoint list, I can see plain form not browser enabled InfoPath form. I checked InfoPath Form Services, everything seems to be good. What should I do to publish SharePoint list from InfoPath 2010 to SharePoint 2010 as browser enabled form?

Infopath Form Data submitting to Sharepoint 2010 List

  
Making a Client intake form that once submitted will send data to  a sharepoint 2010 List called contacts. Short Summary the form will have repeating fields and alot of information to submit. I have looked and read all over but I cannot find an easy step by step guild on how to submit the form data like that. Long Summary on the sharepoint site a button will open a form for adding a new client.  once the form has been filled out and the user hits submit sharepoint will then create a User File, in clients file, and take the data and put it into contacts list. I am trying to make use of Sharepoint as I would with access, meaning the more information I have on a client the easier it will be to mail merge letters, motions, basicly any file prepaired stuff. So once I have css designed forsharepoint to make it look the way I want then the forms should intergrate perfect

infopath 2010 form to ms word or pdf

  
Hi all            I am working with sharepoint 2010 and infopath 2010 . i had  a infopath form which is published to a form library . My goal is to  convert the submitted form to pdf or ms word document which contains the information i filled in the form. thnxs shabadh

SP 2010 Form Based Authentication username begins with "i:0#.w|"

  
Hello there! For the life of me, i can't figure out why SharePoint keeps putting the phrase "i:0#.w|" infront of everyones username / accounts. Both on mysite and portal sites. A quick bing search revelaed that i am not the only one: http://fangdahai.blogspot.com/2010/06/i0w-is-still-there-in-sharepoint-2010.html. Anyone have a solution to fix this annoying problem? Thanks!
Categories: 
ASP.NetWindows Application  .NET Framework  C#  VB.Net  ADO.Net  
Sql Server  SharePoint  Silverlight  Others  All   

Hall of Fame    Twitter   Terms of Service    Privacy Policy    Contact Us    Archives   Tell A Friend