.NET Tutorials, Forums, Interview Questions And Answers
Welcome :Guest
Sign In
Win Surprise Gifts!!!

Top 5 Contributors of the Month
david stephan
Gaurav Pal
Post New Web Links

Disable reply in email

Posted By:      Posted Date: August 31, 2010    Points: 0   Category :ASP.Net
Hi all, I am using smtp to send email messages through our asp.net aplication. I want to stop user from replying the mail i had sent. I had seen this on some autogenerated mails where they does not show senders address and also we cannot reply to these address. How to achieve this in asp.net. Do anyone have any suggestions ?Thanks

View Complete Post

More Related Resource Links

Reply by email to thread in discussion forum?

1. Will Sharepoint 2010 allows user to reply a discussion thread from the email alert? 2. How should I install social networking features on sharepoint 2010? 3. When "Version" is turned on, system is always asking to login in back. Can we bypass the login in all browsers i.e. Firefox, Chrome, Safari etc. ? 4.Mac users has little issues in check-in/check-out functionality in SP 2007, Is SP 2010 doing same thing?     Thanks in Advance!!

How to disable "All day event" of Calendar list in email alerts ?




I have hidded the All day event in display, edit, new forms using javascript code.

I want to hide the "All Day Event","Recurrence",Workspace of calendar list in email alerts



Srikanth Reddy


Sharepoint Designer 2010 email reply to

I have created a workflow for a Sharepoint 2010 Doc Library and it sends emails correctly but I need to set the "reply to" email to a specific email address. Currently it comes from and comes back to portal@......com

Cannot set the email from address (reply-to) in SharePoint Designer workflow

I have created several workflows for custom lists. Among other actions, they send out emails. It appears however, that they all use the same from-address. I would like to supply each of these workflows with different reply-to addresses.

Can I do that? After a lot of searching it appears that the only way is to create separate Web Applications, since the reply-to address is set on Web Application level. But that would require several extra web applications in my case, which again need their own site collections and sites.

I really, really miss a "From" field in the SharePoint Designer workflow "Send e-mail" action.

Best regards, Jan.

How to set Reply-To to single email address


Hi friends,

I have tried the below two codes for setting Reply-To single email address even sending email from many "From" email address. And its not working either.

mail.Headers.Add("Reply-To", "alternate_email@mycompany.com")


mail.ReplyTo = new MailAddress("alternate_email@mycompany.com");

Please guide me my dear friends.

PrintPocketCE Print Pocket Excel, Pocket Word and email files

Version 3.560 (May 15, 2009):

Important bug fix: a slight difference in how some devices create fonts was causing a few devices to have significantly longer print times for large print jobs.

Adjusted PocketJet printer paper feed commands

Other minor fixes and enhancements.

Version 3.559 (Mar 5, 2009):

Added support for Martel MCP78xx printers

Version 3.558 (Aug 20, 2008):

Added support for Martel MCP78xx printers

Version 3.557 (June 27, 2008):

Fixed error in Canon printer support

Fixed COM0 port selection

Version 3.556 (June 15, 2008):

Added support for Brother MW-260

Added support for Sato MB400

Version 3.555 (Aug 8, 2007):

Added support for Pentax RuggedJet 3 and RuggedJet 4 printers

Changed Epson TM-P60 support to maximum page width of 1200 dots

Version 3.551 (Aug 1, 2006):

Added Peripheral Nomad printer support

Version 3.550 (Mar 23, 2006):

Added Panasonic JT-H200PR printer support

Added Pocket Spectrum printer support

Fixed problem with WM5.0 "inverted image" problem

Send Email from SQL Server Express Using a CLR Stored Procedure

One of the nice things about SQL Server is the ability to send email using T-SQL. The downside is that this functionality does not exist in SQL Server Express. In this tip I will show you how to build a basic CLR stored procedure to send email messages from SQL Server Express, although this same technique could be used for any version of SQL Server.

If you have not yet built a CLR stored procedure, please refer to this tip for what needs to be done for the initial setup.

Sending a File Using Email Helper in WebPages/Razor


Note: This is particularly with respect to Email Helper in WebPages/Razor. Please don't post links using System.Net.Mail object.

Following this tutorial: http://www.asp.net/webmatrix/tutorials/9-adding-email-to-your-website

Under "Sending a File Using Email" section what exactly is the code trying to do.

1: The SendFile.cshtml does not have any option to select file.

2: ProcessFile.cshtml is running fine. I am getting the email but no attachement.

I tried changing fileAttachment input to type="file" but not file is being sent to my email. I just get the message send in body.

Question: How exactly this file attachment works using Email Helper in WebPages.

Linq - add data to database then email user the details


Hi all

I'm not sure how to structure the code for this but what I want to do is be able to add data to a database, and once this has completed successfully, then email the user to say the details have been added successfully to the database.

I need to:

1. Check that the relevant data has been added into the database then

2. Email the details of the relevant data when completed. 


Thanks in advance for your help,




Using CreateNewUserWizard SendingMail method to email me, not applicatnt.


I have staff area of my site I am protecting with forms authentication using c# and .Net 4.0. What I want to do is let the staff members register on the site but instead of the confermation email being sent to them I want it sent to me so I can go in and approve it. I have been trying to use the SendingMail method  but can not figure out how to get it to email me instead of the person that registered. I have searched around this site and find many topics on the SendingMail method but none seem to properly address my issue. Can anyone help me out?

How to send an email with information in query string


First I will say I googled (Binged to make Bill happy) for this but could not find anything, perhaps I am not stating what I need correctly;

I have a website that a customer creates orders (for a printing company) and after the order, I would like to email the customer a link to view the status of their order;

I need to send the CustomerID in the link so on the returning page if a CustomerID is detected in the querystring, I "auto login" the client and open the "Dashboard" for the order page for that customer.

Can anyone point me in the right direction as to how to send the link and how to parse the querystring to get the values from the link;

Thank you if you can point me in the right direction.

Use Membership but bypass / disable password usage for users


I have an application that does LDAP authentication. The authentication is done on the code behind page of my Login.aspx page. Once the user passes LDAP authentication, a cookie is set and I redirect:

FormsAuthentication.RedirectFromLoginPage(UserName.Text, False)

I would like to setup membership in my application and keep track of some user information. But due to company security requirements, I cannot store user passwords on my application. That must stay on the LDAP server only.

Is there a way to store users but disable password storage on the aspnet_membership table?

Fetching the Currently Logged in user Email


Hey Frnds,

I am using the System.DirectoryServices.UserPrincipal.Current.EmailAddress to fetch the Currently logged in users email from AD.

If  debug my sol am getting the Exact mail id of that Particular user for ex:john@in.domain.com.

If i host My Application on iis

And Access my App am getting some other Email id instead of the john@in.domain.com.

I have changed the Application Pool identity to NetWorkService.

Can any one tell what could be wrong




Security negotiation failed because the remote party did not send back a reply in a timely manner. T



Dear All i have created one simple service

like this

namespace WcfService2
        public class Service1 : IService1
        public string ShowEmpName(string strFirstName, string strLastName)
            return strFirstName + strLastName;

after executing in .net command promt i got 2 files

service.cs & output.config

after that i create one class file like this

namespace WcfService2
    public class clientcs

        static void Main(string[] args)
            Service1Client client = new Service1Client();
            string strResult = client.ShowEmpName("Pradeep", "Deokar");

email notification error 5.1.1


 I am getting an error when sending email via asp.net.  The error is "Mailbox unavailable. The server response was: 5.1.1...User unknown."

However, the email is getting sent.  Why is asp.net returning this error?

I'm using VS 2008, vb.net,  running 2.0 framework.  This happens regardless of whether I'm testing my application from my local machine or running production version.  Also, I can send a batch of emails and get the error for some but not all.

I would like to be able to count of the error messages really being accurate, so this situation is unhelpful to our users, because they will start to just ignore all error messages.




Email Help (System.Net.Mail)


Hi I have a annoying problem. 
I have created a page which takes users details for a quote.

I have then created the form to be emailed to both the user and myself. (Which works fine ATM)

However I would also like to be able to attach a file containing terms and conditions to the email.

I have tried doing this using 

EmailMsg.Attachments.Add(new Attachment("C:\\attachme.txt"));

But everytime that line of code is hit it fails and is caught by my try catch.

Take that line out and the email sends fine, put it in and it breaks the whole page.

Am I missing something really obvious?

Disable check box in a gridview does not working



I have a check box in a template field in a gridview.

Based on some condition, I want those check boxs to  be enable and disable.

I am trying the below code but does working..

 protected void GVstudents_RowDataBound(object sender, GridViewRowEventArgs e)
              if (e.Row.RowType == DataControlRowType.DataRow)
                    string studentID = GVstudents.DataKeys[0].Value.ToString();
                    int stdID = Convert.ToInt32(studentID);
                    int schID = profile.getSchoolIDByStudentID(stdID);
                    int tchrID = profile.getTeacherIDByStudentID(stdID);

                    if (patti.chkIsTeacherPaid(stdID, schID, tchrID))
                        CheckBox cb = (CheckBox)e.Row.FindControl("chkTeacherPayment");
                        cb.Enabled = false;
                        cb.Checked = true;


any help??

ASP.NetWindows Application  .NET Framework  C#  VB.Net  ADO.Net  
Sql Server  SharePoint  Silverlight  Others  All   

Hall of Fame    Twitter   Terms of Service    Privacy Policy    Contact Us    Archives   Tell A Friend