Trigger for backup after SQL Server Start

Restore your full backup, then run a few queries before you keep restoring transaction logs. Brent shows how to use the Standby option for restores.

In this five minute video, Brent demonstrates how to do it by creating a database, populating data, and then showing what disaster recovery is like by doing RESTORE WITH STANDBY.

I have created a sequential sharepoint workflow in WSP Builder in my Sharepoint Server and Deployed it.

But the workflows says Failed on start and retrying ans stops there forever says couldn't start the workflow.

I repaired .NET Framework 3.5sp1 installed

 tried this

 1. I tried again, in C Prompt:  Lodctr "c:\Windows\Microsoft.Net\Framework\v3.0\Windows Workflow Foundation\perfcounters.ini"  it says initiation file cannot be found

2   i again tried this C prompt Lodctr /R "c:\Windows\Microsoft.Net\Framework\v3.0\Windows Workflow Foundation\perfcounters.ini"

it says reloaded  from the system restored

i am still getting the same error.

When i manually go to my  C:\Windows\Microsoft.NET\Framework\v3.0\Windows Workflow Foundation i can see a folder for SQL that's it nothing more than that..

I dont know what is happening i am trying it from 2 days and still no solution.

any ideas would be real great help for me.

My system is 64 bit , Window server 2008, MOSS SP2, Visual Studio 2008 Version 9.0.30729.

.Net Framework 3.5 sp1

and WSP builder the one from Codeplex for 64 bit machines

Hello, I use SQL Server 2005 for multi-user access.  In the Surface Area Configuration, I changed the protocol from TCP/IP to Named Pipes and restarted the service.  Then I went to SQL Server Browser, stopped it and clicked on Start to restart.  I am getting a message "An error occurred while performing this operation".  I am not able to get the Browser started.  Any help would be greatly appreciated.

Win 2003, SQL 2005/SQL2008 64 bit enterprise failover cluster with 3 nodes and 6 instances. The mount points configured as cluster resources for the data/backup/logs. The entire cluster mount points are SAN replicated to a DR Site. But backup drives/LUNs are excluded from the replication. All the disk resources including backup LUNs are set to dependencies on the SQL Server server. The SQL Server is not coming on-line in the DR Site due to unavailability of the backup LUNs (failed resources). As per the documentation all the disk resources must be set to dependencies (http://support.microsoft.com/kb/835185). Thought it did not specifically mentions only Data/Log mount points and/or the backup LUNs as well. "The SQL Server 2005 resource depends on the SQL network name resource and the physical disk resources that hold its data. When mount points are being used together with the physical disks, each mount point must appear as a cluster resource. Additionally, each mount point must also be added as a SQL Server dependency. If only the root physical disks dependency is added and the mount points are not added, database corruption will occur on failover. Database corruption may also occur when SQL Server is restarted without failing over. "     What if I remove the backup LUNs from dependencies list. This will allow me to recover the SQL Server

Hi I have a server which is not backing up a db each day. When I look at the event log it displays the following...   SQL Server has encountered 1 occurrence(s) of I/O requests taking longer than 15 seconds to complete on file [D:\########\########_File_CS_DefaultData.ndf] in database [########] (5). The OS file handle is 0x000006A0. The offset of the latest long I/O is: 0x00000008e00000 2010-08-16 16:07:38.19 Backup Error: 3203, Severity: 16, State: 1. 2010-08-16 16:07:38.19 Backup Read on "D:\########\########_File_CS_DefaultData.ndf" failed: 1117(failed to retrieve text for this error. Reason: 15100) 2010-08-16 16:07:38.20 Backup Error: 3041, Severity: 16, State: 1. 2010-08-16 16:07:38.20 Backup BACKUP failed to complete the command BACKUP DATABASE ########. Check the backup application log for detailed messages. 2010-08-16 16:12:14.32 spid5s SQL Server has encountered 2 occurrence(s) of I/O requests taking longer than 15 seconds to complete on file [D:\########\########_File_CS_DefaultData.ndf] in database [########] (5). The OS file handle is 0x000006A0. The offset of the latest long I/O is: 0x00000009900000 2010-08-16 16:13:07.02 Backup Error: 3203, Severity: 16, State: 1. 2010-08-16 16:13:07.02 Backup Read on "D:\########\########_File_CS_DefaultData.ndf" failed: 1117(failed to retrieve text for this error. Reason: 15105) 2010-

Sorry i need help, i have instal and reinstal sql 2008 over and over but always failed the problem is the services can't start and when i cek error log this written: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.0.1600.22%26EvtType%3d0xE53883A0%400xBE03358B%401306%4024

I have a SQL Server 2005 database that contains 3 files.  Sometimes when I run rhe backup, it appears to only backup 2 of the three files.  The only way I can get it to return to a full backup is to restore the database from a backup tape.

When I try to bring SQLAGENT Online, I get the following errors: EventID:53 [sqagtres] StartResourceService: Failed to start SQLSERVERAGENT service.  CurrentState: 1 [sqagtres] OnlineThread: ResUtilsStartResourceService failed (status 435) [sqagtres] OnlineThread: Error 435 bringing resource online.   I just did a fresh SQL Cluster install as well.  When I installed the cluster, the service account was good to go.  I cant figure out what is going on.  SQL Server Engine starts fine.  Any ideas?

To verify if the "2008 R2" version can be restored back to a "2008" dbserver I make an experiment:  construct a database on R2 version ( version : 10.50.xxx )  and backup it; then I try to restore the db backup to a "sql server 2008" db-server ( version : 10.0.xxx ) but get failed. Error message is as shown: The database was backed up on a server running version 10.50.1600. That version is incompatible with this server, which is running version 10.00.2531. Either restore the database on a server that supports the backup, or use a backup that is compatible with this server.   Originally I want to upgrade a "2008" server to "2008 r2" , but this problem withdraws me: if I do so , I am afraid all the existing clientuser's dbs cannot be backed up to themselves if they don't have "2008 r2" locally:   if a database is backed up under "2008 r2" environment whereas client user only has "2008" db server, does it mean he cannot restore it anymore?   So I wonder if there is an approach that helps me to create a "backward-compatible" database; when creating database on wizard there is an option to choose "compatibility level" but I don't think it meets my requirement..    Anyone can help me on this ??    

VERY IMPORTANT i am trying to restore database.bak in sql server 2005 (i know the database.bak was also generated in sql 2005 server) i am trying to restore back up database .bak into the new database i just created in sql server 2005 i have saved my database .bak into c drive and when i select database .bak "From Device", it doesn't get populated in the list below and i see nothing and it keeps on prompting a message "You must select a restore source" Here's the screen shot:   PLEASE HELP..it's really important (i tried restoring database in sql server 2008 and it was sucessful but i am facing this problem in sql server 2005 only)  

I have a SQL Server 2008 R2 instance that I need to backup and restore onto a SQL 2008 instance. When I attempt to restore the back up (.bak) database from the R2 SQL server onto the SQL 2008 server I get the following message: The database was backed up on a server running version 10.50.1600. That version is incompatible with this server, which is running version 10.00.2531. Either restore the database on a server that supports the backup, or use a backup that is compatible with this server. (Microsoft.SqlServer.Smo) How can i backup the SQL 2008 R2 database to be compatible with SQL 2008?Ian Ceicys

I cannot start sql server 2008 after repair windows. I open even log (control panel >> administration >> event viewer) find error log with sql server it notice Could not open error log file 'C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\Log\ERRORLOG'. Operating system error = 5(failed to retrieve text for this error. Reason: 1815) I open file ERRORLOG.5 but I don't understand where I should fix?  I copy errorlog.5 on this webboard  Please help me! thank you 2010-08-20 08:16:52.89 Server      Microsoft SQL Server 2008 (RTM) - 10.0.1600.22 (Intel X86)  Jul  9 2008 14:43:34  Copyright (c) 1988-2008 Microsoft Corporation  Standard Edition on Windows NT 5.1 <X86> (Build 2600: Service Pack 3) 2010-08-20 08:16:52.89 Server      (c) 2005 Microsoft Corporation. 2010-08-20 08:16:52.89 Server      All rights reserved. 2010-08-20 08:16:52.89 Server      Server process ID is 2248. 2010-08-20 08:16:52.89 Server      Authentication mode is MIXED. 2010-08-20 08:16:52.89 Server      Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\Log\ERRORLOG'. 2010-08-20 08:16:52.89 Server    &nbs

I cannot start sql server 2008 after repair windows. sql server (MSSQLSERVER) not start dialog message "The request failed or the service didn't respond in a timely fashion.Consult the event log or other applicable error logs for details"  I open even log (control panel >> administration >> event viewer) find error log with sql server it notice Could not open error log file 'C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\Log\ERRORLOG'. Operating system error = 5(failed to retrieve text for this error. Reason: 1815) I open file ERRORLOG.5 but I don't understand where I should fix?  I copy errorlog.5 on this webboard  Please help me! thank you   2010-08-20 08:16:52.89 Server      Microsoft SQL Server 2008 (RTM) - 10.0.1600.22 (Intel X86)  Jul  9 2008 14:43:34  Copyright (c) 1988-2008 Microsoft Corporation  Standard Edition on Windows NT 5.1 <X86> (Build 2600: Service Pack 3) 2010-08-20 08:16:52.89 Server      (c) 2005 Microsoft Corporation. 2010-08-20 08:16:52.89 Server      All rights reserved. 2010-08-20 08:16:52.89 Server      Server process ID is 2248. 2010-08-20 08:16:52.89 Server      Authentication mode is MIXED. 2010-08-20 08:16:52.89 Server  &

I have a 2008R2 server that does AD, sharepoint and file shares.  What I need to have to is if the main server goes offline a second server pick up where it left off. What is the a good solution for me?   Thanks

Could really use some help. Am running XP Pro SP3.  Had 2005 Express running fine previously.  Installed 2008 Express but cannot get the SQL Server service to start.  SQL Server Agent does start though.  In log (below) it seems to be trying to access an E:\ drive that doesn't exist (did default install to C:\Program Files) - plus other issues.  Have 5gig+ free, so not sure why it's saying not enough space.  Have RTFMd the problem for a whole day with no luck.  Any advice much appreciated.   Microsoft SQL Server 2008 R2 (RTM) - 10.50.1600.1 (Intel X86)  Apr  2 2010 15:53:02  Copyright (c) Microsoft Corporation Express Edition with Advanced Services on Windows NT 5.1 <X86> (Build 2600: Service Pack 3) (Hypervisor)   Error: 17054, Severity: 16, State: 1. The current event was not reported to the Windows Events log. Operating system error = 1502(The event log file is full.). You may need to clear the Windows Events log if it is full. (c) Microsoft Corporation. All rights reserved. Server process ID is 4988. Authentication mode is WINDOWS-ONLY. Logging SQL Server messages in file 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Log\ERRORLOG'. This instance of SQL Server last reported using a process ID of 3232 at 9/4/2010 9:36:12 AM (local) 9/4/2010 1:36:12 PM (UTC). This is an informational

I cannot start sql server 2008 after repair windows. I open even log (control panel >> administration >> event viewer) find error log with sql server it notice Could not open error log file 'C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\Log\ERRORLOG'. Operating system error = 5(failed to retrieve text for this error. Reason: 1815) I open file ERRORLOG.5 but I don't understand where I should fix?  I copy errorlog.5 on this webboard  Please help me! thank you 2010-08-20 08:16:52.89 Server      Microsoft SQL Server 2008 (RTM) - 10.0.1600.22 (Intel X86)  Jul  9 2008 14:43:34  Copyright (c) 1988-2008 Microsoft Corporation  Standard Edition on Windows NT 5.1 <X86> (Build 2600: Service Pack 3) 2010-08-20 08:16:52.89 Server      (c) 2005 Microsoft Corporation. 2010-08-20 08:16:52.89 Server      All rights reserved. 2010-08-20 08:16:52.89 Server      Server process ID is 2248. 2010-08-20 08:16:52.89 Server      Authentication mode is MIXED. 2010-08-20 08:16:52.89 Server      Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\Log\ERRORLOG'. 2010-08-20 08:16:52.89 Server    &nbs

System.Diagnostics.Process.Start not work with IIS, but on ASP.NET Development Server