.NET Tutorials, Forums, Interview Questions And Answers
Welcome :Guest
Sign In
Win Surprise Gifts!!!

Top 5 Contributors of the Month
Gaurav Pal
Post New Web Links

Using ajax to submit and update form

Posted By:      Posted Date: August 27, 2010    Points: 0   Category :ASP.Net

Hi all,

  I'm new to ajax and not sure if it's necessarily the technology I need to accompolish what I'm looking to do. What I'd like to have is a simple two textbox and button form that let's the user submit some credentials (not for logging in) but instead to verify their identity for other purposes.  I would label the button as "Continue" and assuming it passes through, the form would update with some new data entry controls that would allow them to submit some final information.  I thought perhaps ajax would be a nice way to do this since I wouldn't need to create a second continuation page from the first to display a new form.  However, I'm unsure how it's possible to update the form in the first place to look different.  Or is there perhaps a cleaner way to do this?  Any help would be appreciated.  Thanks

View Complete Post

More Related Resource Links

BlockUI in case of page submit. (for normal and ajax form submit)


Hi I want to implement BlockUI, the requirement is as below

1) On page submit it should gray out the page, it can be a normal submit (eg. Button click handled in code behind without any update panel used in page.)

2) Should be grayed out till the page is fully loaded (in case of button click, Page redirect).

My application pages can have hierarchy nested master page or at least one master page.  

I want to gray out the page in any case if page is submitted, that the stuff i want to achieve.

Thanks in advance.


I thought this would be simple... Trying to create a login does an ajax check before submit


I have the standard .net login control that is working.  (Still learning .net after 15yrs of classic)

What I want to do is OnButtonClick run a javascript function (to do an ajax call to the db to check if login is valid or not) and if it returns true, then submit the form normally, else don't submit. The piece that I can't figure out, is how to correctly override the default click even to hit my JS routine and then submit the form properly afterwards.

Thanks ahead of time

Switch views when opening a form depending on submit locations?



I would like to know it was possible to switch views when opening a form depending on where the form has been submitted.

I am submitting my form to library A and library B and want to be able to open it in view 1 in library A and in view 2 in library B.

Is there a way to set some url conditions in the open behavior rules?

Thanks a lot!

Button in a form that does not submit


I've been trying to figure this out all afternoon but my google-fu seems to be failing me. I'm setting up a page with a fairly large form, which has one field that is going to require some kind of popup page that will allow the user to perform a lookup. At the moment I'm only prototyping the page so I'm actually only attempting to a the button up to fire an alert when the button is clicked instead of generating a lookup screen. However it seems that no matter what I do the button causes the form to submit.

I remember one of the very first ASP .NET beginner videos I ever watched went through configuring a button to perform actions without submitting, but I can't seem to figure out which one it was.

Update web form using custom events.


How can I update UI of web form via event?

I have 2 buttons on page, where button1.visible = false.

Page code behind:

     protected void Page_Load(object sender, EventArgs e)
            if (!this.IsPostBack)
                Class1.ShowButtonEvent += new Class1.ShowButton(Show);

Infopath form using Visual Studio - How to bind repeating table on submit button click ?


Hello friends,

   I have created infopath form using Visual Studio 2008

Form have 3 dropdowns and one repeating table which is bound by Datasource ( List from sharepoint ).

whenever i select appropritae values from drop down, Repeating table gets bound as datasource for dropdown and repeating table are same.

I have done conditional formating for repeating table using repeating table properties.


My Question:


Now i included one submit button and i want when i click submit button it will check DropDown Values and if appropriate record matching these values found it will fill repeating table

How i achive this ? as i dont find how to bind repeating table on submit button.

Please help if anyone have answer.


Thanks and Regards,


Kapil Bhosale.




Submit a aspx form to a sharepoint list?

Hi,I have a wizard control form in visual studio 2008.. I need to submit this form to a sharepoint list? Is this possible?thanks!

How to submit a form from code behind or something like that

Hi everyone,I dunno what would I do without the forum. I'm stucked again. Basically, what I am trying to figure out something like paypal where we call a specific URL from another web server and give them some information. Basically, I will have a URL like http://www.mysite.com/check_ur_balance.aspx?id=sth&blurblurblur where user call that URL and I query the information from the database and pass it back to the caller site.The flow is something like below:www.client.com  (hey give me this user balance) -> www.mysite.com (I query the user balance and send it back) -> www.client.comPlease help me out. Looking forward to receiving more input on this matter.

How to update client asp.net form periodically?

Hi all, I am fresh new to asp.net.  I try to convert my windows form into asp.net application. On my Windows form I use threads to monitor for changes in data sources to udpate my controls. However, I got no clue how to accomplish this in asp.net form.  It seems I cannot create a thread in the page to update my controls in the page.  I realy appreciate for any comments   Thanks

AJAX update panel and update progress controls

I have writtena Crystal reports web application, that prompts ths user for parameters and then apply them and exports the report to a folder as .rpt and then display the report. I prompt the parameters on one screen and then display the report on another page. I have the AJAX update panel and update progress controls in the parameter page. When the user enters the parameters and click on ok, I export the report and then loads the report to a session report document and transfer the user to the second page where the report is displayed. I use the following code to do transfer to the seconds page. I have excluded the report load and parameter assign code here.rpt.ExportToDisk(ExportFormatType.CrystalReport, "c:\reports\testrep.rpt") Session("rpt") = New ReportDocument Session("rpt").load("c:\reports\testrep.rpt") Response.Redirect("show.aspx") In the second page I have the following: rptViewer.reportsource = Session("rpt") My problem is this works one time and then stops working the second. What I found out was it comes to the statement: Response.Redirect("show.aspx") But it does not even load the show.aspx page. It stays on the parameter page. There are no errors displayed. I could not see any errors when I debug the application also. And out of the blue it works

InfoPath Form: Encountered error while trying to submit the form from the browser

Hi,I have created a form in InfoPath, and i filled in the form in the browser. But there's an error apppeared when i tried to click on the submit button to submit the form. May i know is there ways for me to check what cause this error because i have no idea about this. "There has been an error while processing the form. There is an unclosed literal string. Line 1, position 543. System.Xml.XmlException: There is an unclosed literal string. Line 1, position 543. at System.Xml.XmlTextReaderImpl.Throw(Exception e) at System.Xml.XmlTextReaderImpl.Throw(String res, String arg) at System.Xml.XmlTextReaderImpl.ParseAttributeValueSlow(Int32 curPos, Char quoteChar, NodeData attr) at System.Xml.XmlTextReaderImpl.ParseAttributes() at System.Xml.XmlTextReaderImpl.ParseElement() at System.Xml.XmlTextReaderImpl.ParseElementContent() at System.Xml.XmlTextReaderImpl.Read() at System.Xml.XmlLoader.LoadNode(Boolean skipOverWhitespace) at System.Xml.XmlLoader.LoadDocSequence(XmlDocument parentDoc) at System.Xml.XmlLoader.Load(XmlDocument doc, XmlReader reader, Boolean preserveWhitespace) at System.Xml.XmlDocument.Load(XmlReader reader) at Microsoft.Office.InfoPath.Server.Xml.InfoPathXmlDocument.Load(XmlReader reader) at Microsoft.Office.InfoPath.Server.DocumentLifetime.DataObject.<>c__DisplayClass3.<.ctor>b__0() at Microsoft.Office.Server.Diagnostics.FirstChanceHandler.Exception

make anonymous users submit data to a form library

isn't there a way for anonymous users to submit form data to a form library without custom code?

making page work after DB update in Form View

I could really use some help with this issue. I have a DropDown that allows the selection of a Category Code. The selection populates a Gridview with details of records matching the Category Code. I have only enabled the Select option on the Gridview, which when clicked populates a Formview in Edit Mode with the full record information. When editing is complete and the Update link is clicked, I can not get the page to properly reload/postback. When another Category Code is selected from the Drop Down the Gridview does not report a list of records.   Any help would be greatly appreciated.   Thanks,              

How to prevent automatic update from sharepoint list on Infopath 2007 form

Hi there, I've got an Infopath 2007 form on MOSS 2007. I have a custom list in sharepoint and the infopath form has a data connection to that list to receive data. Is there any way to prevent automatic update on the values in the form that is received from the list. I'd like the new form to have updated info received from the list. However, the old/existing forms that were created should have the data that were available at the time when the form was created. Let me know if this is not clear and I'll try to explain more. Thanks,Pman http://www.pmansLab.com/

submit infopath 2003 form to a sharepoint list

hi, is it posible to add  an infopath 2003 form to a sharepoint list, not document library but a list. and can i create views from the infopath 2003 form?

InfoPath form web part stops the close on submit

I have successfully published HTML browser enabled InfoPath 2010 forms to form libraries in SharePoint 2010. Users can navigate to the libraries and click new docuiment and fill out and submit forms, and the behavior of submit is as programmed in the form namely I have a concat rule for form name and chose action after submit to close the form with a success message. The problem I am seeing is a little abstract so stay with me while I explain. I'm hosting a number links to web part pages with the infopath web part on them. I use a links web part to aggrigate about 16 forms links on a single page. Users can successfully click on a link, are migrated to the web part page that has the form displayed in the infopath web part and all is well till they click the submit (on the ribbon, or custom button or whatever) The form does successfully get saved into the form library, but the form does not close. I need to make this process very simple for users without any training expended on the process. I'd like to shift focus to the previous web page, or close the form or something dramatic visually to show the user that they have completed the form fill out, and allow them to fill another form. Codebehind examples gratefully accepted! /Robin    
ASP.NetWindows Application  .NET Framework  C#  VB.Net  ADO.Net  
Sql Server  SharePoint  Silverlight  Others  All   

Hall of Fame    Twitter   Terms of Service    Privacy Policy    Contact Us    Archives   Tell A Friend