.NET Tutorials, Forums, Interview Questions And Answers
Welcome :Guest
Sign In
Register
 
Win Surprise Gifts!!!
Congratulations!!!


Top 5 Contributors of the Month
Shivakumaran
Post New Web Links

How to show percentage on Performance point service Pie?

Posted By:      Posted Date: November 03, 2010    Points: 0   Category :SharePoint
 

As the way its in excel how this can be applied to pie report in performance point?

Plus there is only option of legend to be on top or right. why not on bottom and left ??




View Complete Post


More Related Resource Links

Video: The Access Show: Client Performance Improvements against SharePoint Lists

  
Today's guest is DJ Cole, architect and primary developer of SharePoint connectivity performance improvements on the Access development team. DJ dropped by to talk about how Access 2010 connects to SharePoint, and to discuss the work necessary for improving client-side performance. (Length: 13:05)

how can we show error in our application when exception occur in webs service

  
how can we show error in our application when exception occur in webs service

Pie show percentage greater than 100%

  
Hi all , i have a pie chart and show percentage as label ,i set label data as #PERCENT{P0} but when report runs it has 3 value: 58%,11%,32% you can see the 3 value add up to 101% is something else i need to set on label ? any help for this ?

Performance Point Error

  
HI I have just setup a BI Centre site and when i click on the 'Start Using PerformancePoint Services' link, i get the following error: Error An error occurred during the processing of /Departments/ICT/ICTBI/Pages/ppssample.aspx. Code blocks are not allowed in this file.   Troubleshoot issues with Microsoft SharePoint Foundation. Correlation ID: 8bad4478-dc69-46cd-b3f3-6ec5035049db Date and Time: 06/09/2010 16:05:22 Does anyone know what to do? I have setup the secure store service, and have set the unattend service account for the performance point services, i have set credentials and made sure in SQL that all accounts i have used have access to the Performance Point DB.

Performance Point: Code blocks are not allowed in this file.

  
Hi All,I'm trying to use Performance Point 2010 in Sharepoint 2010...I have start the application in centrel adminI have created a site collection based on the Bisuness Intelligence Center templateI can surf the new Site Collection but when I try to open the "Start using PerformancePoint Services" link I get the following error:"An error occurred during the processing of /PerformancePoint/Pages/ppssample.aspx. Code blocks are not allowed in this file."is there any way to fix it???is there any good source to understand and deploy Performance Point 2010??thanks AllVit

Change performance point report color

  
This should be a simple question. I would like to change the color of the bars in the bar graph charts, and the color of the line in the line graph charts. I would imagine there is a way to do this. 

Is it possible to show on a site whether a service is running?

  
I am trying to have a marker show whether or not a particular service within the services.msc is running on a remote server(s). I have a service called Yardi Services on a virtual server.  I want to be able to show on a dashboard I am creating for work, whether this service in running or stopped.  For some reason this service will randomly stop though I have a auto restart on error.  It is really confusing and so I want to be able to know when it stops so I can restart it.       I have not been able to find anything online to support this.  I am assuming that I would need to create a web service or use WMI?  I am new to this stuff and could use some help or direction.  

Performance Point 2010

  
To implement tag clouds to a Analytical report in  Performance Point 2010. Also can we have a Performance reports to be imported as a Web part in TeamSite Collection

Comparison of Performance Point and Oracle Business Intelligence

  
Hello, Can someone provide me with an article that compares Oracle BI with Performance Point? Thanks in advance, Shelley

SharePoint 2010 - Performance Point & Dashboard Designer

  
We have successfully installed SharePoint 2010 onto our dev machine; we have also followed the documented steps for configuring Performance Point; http://blogs.msdn.com/b/performancepoint/archive/2009/11/24/deploying-performancepoint-2010-soup-to-nuts.aspx.  All seems fine however we do not seem to be able to create a connection from Dashboard designer back into SharePoint.  When we check the logs we get the following error Critical   An unexpected error occurred.  Error 5678.  Exception details: Microsoft.SharePoint.Upgrade.SPUpgradeCompatibilityException: There is a compatibility range mismatch between the Web server and database "WSS_Content_PerformancePoint_1", and connections to the data have been blocked to due to this incompatibility. This can happen when a content database has not been upgraded to be within the compatibility range of the Web server, or if the database has been upgraded to a higher level than the web server. The Web server and the database must be upgraded to the same version and build level to return to compatibility range. We have a farm config on a single 64 bit box and SQL Server 2008 loaded.  We have un-installed and re-installed the site collection. Does anyone have any ideas? Eddie Barrett

WCF TCP-IP End Point Error : The message could not be dispatched because the service at the endpoint

  
"The message could not be dispatched because the service at the endpoint address 'net.tcp://192.168.237.129:9000/TerritoryMgt.svc' is unavailable for the protocol of the address." This is the Exception I am getting when I am trying to access my WCF Service with 'TCP-IP' end point. My Service Web.Config file is as follows. <system.serviceModel>     <bindings>       <webHttpBinding>         <binding name="JsonWebBinding">           <security mode="TransportCredentialOnly">             <transport clientCredentialType="Windows"></transport>           </security>         </binding>       </webHttpBinding>     </bindings>     <services>       <service behaviorConfiguration="SampleBehaviour" name="SeP.Library.ServiceLibrary.TerritoryMgt">         <endpoint address="" behaviorConfiguration="jsonEndPointBehaviour" binding="webHttpBinding" bindingConfiguration="JsonWebBinding"                &nbs

Unable to connect to local host service when a splash screen is show before start the services

  
Hi all:


I want to show a splash screen before start the local host services, the host can be open without error, however the client (Form1) is not able to connect to the service. Without the splash screen, every thing work fine. Any idea why ?

Here is the code.



Imports System.ServiceModel


<ServiceContract()> _
Public Interface IHelloWorldService
   <OperationContract()> _
   Function SayHello(ByVal name As String) As String
End Interface

Public Class HelloWorldService
   Implements IHelloWorldService

   Public Function SayHello(ByVal name As String) As String Implements IHelloWorldService.SayHello
      Return String.Format("Hello, {0}", name)
   End Function
End Class

Module Module1
   Private host As ServiceHost
   Private frmSplash As Form

   Sub Main()
      AddHandler AppDomain.CurrentDomain.AssemblyLoad, Addres

Slow performance of WCF service calling singleton (which calls COM+!)

  

Scenario:
WCF Service call routing to COM+ application.
netTCPBinding, throttling set pretty high.

[ServiceBehavior(InstanceContextMode = InstanceContextMode.Single, ConcurrencyMode=ConcurrencyMode.Multiple)] 

Service has two methods, one simply returns the string was input, the other calls the COM+ component and FOR TESTING returns the string "success" for every call. Therefore, both methods return a simple string.

Client starts 20 threads, each calling the WCF Service twice. (NOTE: A "first call" is made to prime the singleton service and also the COM+ component)

Using log4net and a Stopwatch to log the timings of the clien

Performance drop for WCF service in IIS after worker recycling

  

Hello, we are currently doing some performance tests for our WCF services running on IIS 7. Performance is as expected with moderate CPU and memory usage (CPU usage less than 40%). We are facing a problem when IIS recycles a worker process: After the recycle the throughput drops by about 1/2 with multiple times longer response times.

Some details about the setup:

  • Dedicated machine for performance testing, no other services installed
  • Services used by tested services are installed on a second, dedicated machine as mock services
  • The problem is significant for services that use other services using WCF (i.e. tested services are both, server and client)
  • The service parallelizes requests to a WCF mock service on the second machine (about 8 outgoing requests per incoming request)
Any ideas what might be happening here?

"Cannot Connect to Performance Point Services"

  
When attempting to create my first data source in Performance Point Services Dashboard Designer, I get the above error.  I am owner on the Sharepoint Farm and the PPS site.
Steve Walker

Training on Performance Point 2010 and SQL Server 2008 BIDS

  

Hello,

Me and my team are developing a POC in Performance Point 2010 using SSASCubes,we are planning to recommend trainign for the team  but i had a couple of questions.

1.The Team is totally new to this technology as we dont know what is .NET,MOSS 2007 and SQL Server 2008 R2.

2.Does working in PPS 2010 requires basics of Sharepoint 2010 and .NET,if yes then what are the areas we need to look into it before proceeding with PPS 2010 training

 

Can anybody kindly guide us with the same

 

Regards

Raavan


Miscrosoft SQL Server Analysis Service does not show conditions and calculated members

  

Hi,

I am using MS visual studio 2005 to modify a report. The reports has got some filters (conditions) and calculated fields but when I open the report, all it shows me blanks values in condition window screen (where it displays Dimension, hierarchy, Operator, Filter Expression, Parameter fields) and also it does not display any calculated fields in the calculated members widnow. 

I am using SP1. Do I need to re-install the software or am I misisng some tool to turn on.

Thanks in Advance

Naveed


Categories: 
ASP.NetWindows Application  .NET Framework  C#  VB.Net  ADO.Net  
Sql Server  SharePoint  Silverlight  Others  All   

Hall of Fame    Twitter   Terms of Service    Privacy Policy    Contact Us    Archives   Tell A Friend