.NET Tutorials, Forums, Interview Questions And Answers
Welcome :Guest
Sign In
Win Surprise Gifts!!!

Top 5 Contributors of the Month
Gaurav Pal
Post New Web Links

Problem with list controls and update progress template

Posted By:      Posted Date: August 26, 2010    Points: 0   Category :ASP.Net


I have an update panel that surrounds a wizard control which I use in conjunction with a update progress control. Now my update progress control works perfectly, with my animated gif and div tag that lays over my wizard control when the user goes from step to step. However, there is a problem that I am struggling to solve. A number of my steps use controls like list boxes, and when the update progress control fires, the list control is not laying underneath my div an animated gif no matter how high a make my css z-index on the div.

Does anyone have a way of solving this?


View Complete Post

More Related Resource Links

AJAX update panel and update progress controls

I have writtena Crystal reports web application, that prompts ths user for parameters and then apply them and exports the report to a folder as .rpt and then display the report. I prompt the parameters on one screen and then display the report on another page. I have the AJAX update panel and update progress controls in the parameter page. When the user enters the parameters and click on ok, I export the report and then loads the report to a session report document and transfer the user to the second page where the report is displayed. I use the following code to do transfer to the seconds page. I have excluded the report load and parameter assign code here.rpt.ExportToDisk(ExportFormatType.CrystalReport, "c:\reports\testrep.rpt") Session("rpt") = New ReportDocument Session("rpt").load("c:\reports\testrep.rpt") Response.Redirect("show.aspx") In the second page I have the following: rptViewer.reportsource = Session("rpt") My problem is this works one time and then stops working the second. What I found out was it comes to the statement: Response.Redirect("show.aspx") But it does not even load the show.aspx page. It stays on the parameter page. There are no errors displayed. I could not see any errors when I debug the application also. And out of the blue it works

save as list template and save as site template problem



Please provide me information for how  to fix this problem.

When to occur this problem in share point.

When  i create save as list template and save as site templates its showing the following error below:
Unknown compression type in a cabinet folder   at Microsoft.SharePoint.Library.SPRequestInternalClass.SaveWebAsTemplate(String bstrUrl, String bstrTemplateName, String bstrTemplateTitle, String bstrDescription, Boolean bSaveData)
   at Microsoft.SharePoint.Library.SPRequest.SaveWebAsTemplate(String bstrUrl, String bstrTemplateName, String bstrTemplateTitle, String bstrDescription, Boolean bSaveData)


Update existing sharepoint list Problem



I ve a prob to updating existing sharepoint list's column on the basis of other field(id or somthing else), using visual studio.

I m updating but its adding a new row below at last in the list.

Please tell me the steps.


Thanks in advance !

Regards- Sharad

Update Existing Sharepoint List's field Problem



This is about sharepoint sequential workflow using visual studio.

I ve a prob to updating existing sharepoint list's field on the basis of other field(id or somthing else), using visual studio.

I m updating sharepoint list but its adding a new row below at last in the sharepoint list.

i m having a UserID(lots of user's ID) field in the sharepoint list, on the basis of this userID i ve to update a perticular field corresponding to UserID.

Please tel me wat type of code i ve to mension.


Thanks in advance !

Regards- Sharad

problem...i want a list item to populate all data in gridview!!!


i have a dropdownbox and a gridview

what I want is to have a list item which populates all data in a gridview.

I have tried using list item selected value=0 but to no avail.

what is the easiest way to achieve this?

Problem with Dynamic Controls



I have a custom user control that contains within it a repeater control. Inside this repeater I programmatically add another custom user control, which contains a text box and a custom validator. This final custom user control can be added any number of times depending on the application's logic. All of this is part of a wizard step.

When the user completes the step, if any of the data added to the text boxes is incorrect the validator gets fired on post back. However, because I can have any number of these controls added to the repeater, the user has to scroll down to see any of the incorrectly completed boxes.

Due to the controls being added dynamically it is not possible to use a validation summary control - I have tried!!! Therefore, is there away I can use JavaScript to position a cursor or to jump to each incorrectly completed textbox without the user needing to scroll down the page? For example, if there are 10 textboxes, and textboxes 8 and 9 have numbers inside them inside strings, then the JavaScript should jump textbox 9.

Concurrent update in sharepoint list item



How the concurrent for sharepoint list item are are handled.

if two or more users are working on same item. Then how sharepoint process multiple update request for particular list item.

Is there a way to update the template of a site?


I am looking for a best practice for managing and applying site design changes.

For instance, in another platform, I could release a site for testing or production use, so content would be added.  At some later date, a change* to the design would be needed and I would take a copy of the design only, make the change and then apply the updated design to the existing site. Content would be maintained but the new design changes would be applied. 

      *A change might mean creating new functionality on an existing element, adding new elements or changing an existing element.

How best should this be done in WSS?

Thank you in advance!

how to hide/display controls in NewForm.aspx based on dropdown value in SharePoint list



I have 1 dropdown in my sharepoint list with other columns. If dropdown value equal to 'xyz' i need to display some other controls, otherwise these controls should be hidden.

I know we can achieve this with javascript. If any one can provide code or sample then it will be appreciated. or is there any other alternative methods to do this ........

Thanks & Regards, Neerubee

proper pattern for list of reusable controls


Say you have a for loop which renders a bunch of the exact same control.  This is probably done with RenderAction or RenderPartial.

What is a way to ensure that each of these controls in the list gets wrapped in a div with a unique ID?


Problem with master page and update panel (I think)



the app I am working with is made up of three nested master pages that have the following design:

The first master page ha only realize the HEADER, BODY and FOOTER divs.

The second one specialize the Body content placeholder and divide it in three more layers: NAVIGATOR, PAGE TITLE, BODY CONTENT.

The final layer specialize the BODY CONTENT in PAGE CONTENT and ACTIONS.

In one of my content pages I have (inside the PAGE CONTENT area) 

  • 1 Update Panel that contains a gridview object
  • 1 Update Panel that contains some HTML code to show in a PopupModalExtender

The PopupModalExtender can be either triggered from inside the gridView and also from a series of LinkButtons that are in the ACTIONS area.

The problem is that when the PopupModalExtender shows the FOOTER and the ACTIONS areas are not dimmed from the style I apply as background to the modal popup. An example of what I am trying to explain can be viewed in the following screenshot.

Why this is going to happen? Has anybody any suggestion on how to solve this problem?

Thanks a lot

Cascade Drop Down List Problem


I have 4 "cascade drop down linked" each other. The first one is "AccesoryFor", the second "TypeOfAccesory", the third "MarkOfAccesory" and the fourth "ModelOfAccesory".

The problem is that sometimes is possible in the web page I'm programming that a "Session Variable" could have a value that must be selected in one of that ddls. But not only that, the "ddl" or the entire "row" where the ddl is located ,must disappear. The problem is that, when the page does the rendering process, the others "cascade drop down" don't find its "control parents", so they stay disable and without data.

So, what I do in the Load Method:

 protected void Page_Load(object sender, EventArgs e)
        if (!IsPostBack)
            Session["AccesoryFor"] = "cellphone";

 public void loadValuesToUI()
    if (Session["consultarRecursos_AccesorioDe"] != null)
            rowAccesoryFor.Visible = false;

As the row where the first DLL is located dissapears, and error occurs saying that "Control-Parents" are not found. There's no way to "Disable" or make dissapear the ddl in the web-service because

Problem with SharePoint Designer 2007 and Custom List Forms


I created several forms (Create/Edit/View) for a SharePoint list, using Custom List Forms.  I'm using Content Types in the list to ensure that each item only has the necessary fields.  When I created the ASPX forms, and inserted the Custom List Forms, I selected the correct Content Type, and I got the right fields inserted in the form.

Now, for some reason I can't identify, every time I create a new form, and insert a Custom List Form, SPD is bringing ALL fields from the list, instead of just bringing the fields included in the selected Content Type.

I have tried many different things to solve the problem, including creating new lists/content types/forms, etc. but SPD is doing the same thing all the time.

Can somebody tell me what may have gone wrong in SPD or MOSS?


c# form problem with list item


I've got a c# form containing a listbox how ever i cant get

listbox1.items.Selected      to work



neither work. both not giving me the option for .selected nor selectedvalue

how does this work on c# forms as it works the above way on webforms....

System.Net.Mail HTML Template Problem


What do I need here ?????? To make this work??

Dim MassMail As New MailMessage()

        Dim Template As ??????????????

        MassMail.To.Add(New MailAddress(TextBox_massemailto.Text))
        MassMail.From = New MailAddress("You@me.com")

        ' MassMail.CC.Add()
        MassMail.Subject = TextBox_massemailsubject.Text
        MassMail.Body = TextBox_massemailBody.Text
        ' MassMail.Body = Template.BodyFileName = "EmailTemplates/BusinessAdBrochure.htm"
        MassMail.Priority = MailPriority.High

        Dim smtpclient As New SmtpClient("relay-hosting.secureserver.net")
        smtpclient.Credentials = New System.Net.NetworkCredential(""You@me.com"", "pasword")
        smtpclient.Port = 25
        smtpclient.EnableSsl = False

.Sort a List problem



I have a little problem with sorting a List<String>.

I have put 4 elements like this and now are trying sort them correct. My example below shows the problem. I am not sure of how sort the names so they comes in this order: "Folder1, Folder2, Folder10, Foler11"  ?

List<String> GetNames = new List<String>();

GetNames .Add("Folder1");
GetNames .Add("Folder10");
GetNames .Add("Folder2");
GetNames .Add("Folder11");

GetNames.Sort(); //Sort the list

The sort comes in this order now which is wrong:

How to sort the list to have this order: ?



In a style template, express a property in terms of the controls properties it is applied to.

Hello,   In the style template below, which works fine, I'd like to express the "Points" property in terms of the applied to controls "Width" and "Height" properties.  As you see, the "Fill" property is expressed in terms of the "Background" property the template is applied to by means of Fill="{TemplateBinding Background}".  The following does not work:   Points="0,({TemplateBinding Height} / 4)  ({TemplateBinding Width} / 12.5),({TemplateBinding Height} / 4) . . ."   Is what I'm looking for possible, all in XAML, no code/converters? <Style x:Key="FolderButton" TargetType="Button"> <Setter Property="Margin" Value="2.5" /> <Setter Property="Template"> <Setter.Value> <ControlTemplate TargetType="{x:Type Button}"> <Grid> <Polygon Fill="{TemplateBinding Background}" Stroke="{TemplateBinding BorderBrush}" Points="0,5 4,5 6,0 23,0 25,5 50,5 50,20 0,20"/> <ContentPresenter HorizontalAlignment="Center" VerticalAlignment="Center"/> </Grid> </ControlTemplate>
ASP.NetWindows Application  .NET Framework  C#  VB.Net  ADO.Net  
Sql Server  SharePoint  Silverlight  Others  All   

Hall of Fame    Twitter   Terms of Service    Privacy Policy    Contact Us    Archives   Tell A Friend