.NET Tutorials, Forums, Interview Questions And Answers
Welcome :Guest
Sign In
Register
 
Win Surprise Gifts!!!
Congratulations!!!


Top 5 Contributors of the Month
Sharon Maxwell
Post New Web Links

[SQL 2008 - SP1] - DRP Log shipping solution and error message

Posted By:      Posted Date: October 28, 2010    Points: 0   Category :Sql Server
 

Hello All !

I have a DRP solution with logshipping (1 site in Europe and 1 site in Asia). The DRP are tested: ok.

3 servers: 1 primary, 1 standby, 1 monitor (sql 2008 edt enterprise US SP1 x64) on Windows 2008 SP2 US x64 with the last updates.

But , on my logs-hipping monitor, I always have this message (I have it when log-shipping installation was configured):

"Message
Executed as user: PROD\svc_sqla_bb. The log shipping secondary database Server001.DBAS has restore threshold of 45 minutes and is out of sync. No restore was performed for 96 minutes. Restored latency is 0 minutes. Check agent log and logshipping monitor information. [SQLSTATE 42000] (Error 14421).  The step failed."

- All the servers have the same time

- All the servers have been updated with the last updates (windows, sql)

- Network latence is correct

- Log shipping is functional: backup, restore: ok

I have searched on the web for this message, but I don't find a good solution for this issue .

Any ideas ?


Thanks for advance for your ideas / help - Regards - Have a nice day ! RHUM2


View Complete Post


More Related Resource Links

SQL Reporting Services 2008 Role in SCCM 2007 R2 has error component status message (SMS SRS web ser

  
SQL Reporting Services 2008 (SMS SRS web service is not running on SRS Reporting point server) with SCCM 2007 R2 -error component status message My environment is (x86) Windows Server 2008 SCCM 2007 R2 with SQL 2008.  The configuration is as follows: SCCM Configuration 1.The reporting Point role on SCCM is installed (SMSSRSRP Setup log is states the install was successful)2.DataSource Settings are SCCMSERVER\SCCM_DB  Test Connection Succeeded3.Database Authentication is set to use (Credentials Stored Securely on the Report Server) I've configured the same credentials in the Reporting Services Configuration ManagerI can access SQL Reporting Services without issue and run reports, etc; but I'm continuing to receive these error status messages..  SRSRP.log Repeats the following: Timed Out... SMS_SRS_REPORTING_POINT 4/17/2009 1:01:58 PM 2076 (0x081C)STATMSG: ID=7403 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_SRS_REPORTING_POINT" SYS=SMS Server SITE=SITE_CODE PID=2748 TID=2076 GMTDATE=Fri Apr 17 17:01:59.165 2009 ISTR0="SMS Server" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_SRS_REPORTING_POINT 4/17/2009 1:01:59 PM 2076 (0x081C)Failures reported during periodic health check by the SRS Server SMS Server. Will retr

SQL 2008 SP1 - Log shipping solution with Logshipping monitor on SQL Server Express Edition SP1 (bad

  

Hello All !

I'm installing a log shipping solution with SQL Server 2008 Standard SP1 (on x64 US). I use a monitor logshipping with SQL Server Express Edition x64 SP1 US. When I try to connect it, I have this message when i tried to use w.x.y.z\SQLEXPRESS  as a monitor server:

'w.x.y.z\SQLEXPRESS' is not a valid monitor server instance.  A monitor server instance must be SQL Server Standard Edition, SQL Server Workgroup Edition, or SQL Server Enterprise Edition.'

In SQL 2005, it is possible to do that with SQL Express. And with 2008 R2, is it possible too or it is the same problem ?


Thanks for advance for your ideas / help - Regards - Have a nice day ! RHUM2

Error messages when deploying SSAS 2008 solution

  
Hello,

I'm working on an AS 2008 project using VS2008. The relational database for the data source is SQL Sever 2008 R2 CTP (n.b correction from original post), and so is the target server I am trying to deploy to. When I try to deploy the solution the following errors are returned:

Error 5 Internal error: Invalid enumeration value. Please call customer support! is not a valid value for this element.  0 0 

Error 6 An error occurred while parsing the 'StorageMode' element at line 1, column 11865 ('http://schemas.microsoft.com/analysisservices/2003/engine' namespace) under Load/ObjectDefinition/Dimension/StorageMode.  0 0 

Error 7 Errors in the metadata manager. An error occurred when instantiating a metadata object from the file, '\\?\C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Data\AMS Analysis Services 2008.0.db\Dim Date.19.dim.xml'.  0 0 

I'm afraid I'm a bit stumped by these. Is it something to do with the fact that the target Analysis Services server is running R2? If so what can I do to deploy to that box?

Thanks
Matt

Error message: Cannot connect to server (SQL Server 2008 R2)

  

I just installed SQL Server 2008 R2.  When I try to connect to the server i get the following error message:

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2)

The Server Name is filled in automatically and I've been told it's my computer's name.  It's correct so I don't understand why I can't connect.  Can anyone please give me some guidance?  I'm not technical in SQL Server so I need a step by step.  Thank you in advance!!

Tina


Cannot Add Reference to .NET solution, get "unexpected error" message

  

I have a class library solution with multiple projects (all type class library).  I need to add a reference to System.Web.dll to one of the projects in the solution in order to send an email from a program.  When I click "Add Reference" for the project, I get error message "Visual Studio has encountered an unexpected error" message.  I don't even get to the Add References dialog box.

Any suggestions on what to do?  The error message is useless.

 


a .NET Framework Int32 error message when running SQL Mmanagement Studio 2008 Express

  

hi,

i'm a newbi to SQL, just installed Microsoft® SQL Server® 2008 Express with Tools(https://www.microsoft.com/downloads/...displaylang=en), also installed the SP1 as requiered and .NET Framework 2.

oh and im running on newly installed WIN 7 Ultimate N x64.

each time when opening mngmnt studio i get a small popup window that says:

---------------------------------------------

Microsoft .NET Framework

Unhandled exeption has occurred in a component in your application. if you click continue the application will ignore this error and attempe to continue.

Method not found: 'Int32

Microsoft.SqlServer.Management.Sdk.Sfc.ISfcDomain.

-------------------------------------------------------------------

Bellow i have a "Details"

a .NET Framework Int32 error message when running SQL Mmanagement Studio 2008 Express

  

hi,

i'm a newbi to SQL, just installed Microsoft® SQL Server® 2008 Express with Tools(https://www.microsoft.com/downloads/...displaylang=en), also installed the SP1 as requiered and .NET Framework 2.

oh and im running on newly installed WIN 7 Ultimate N x64.

each time when opening mngmnt studio i get a small popup window that says:

---------------------------------------------

Microsoft .NET Framework

Unhandled exeption has occurred in a component in your application. if you click continue the application will ignore this error and attempe to continue.

Method not found: 'Int32

Microsoft.SqlServer.Management.Sdk.Sfc.ISfcDomain.

-------------------------------------------------------------------

Bellow i have a "Details"

Upgrading from SQL server 2005 to 2008 and get an error message

  
I am halfway through the process and get this error message "Use the Reporting Services Configuration tool to configure the database source name (DSN) and connect to the database." on the Reporting Services Authenication page.

This is the runtime version that is distributed with Amicus Attorney, a lawofffice management program.

I can barely spell SQL and have no idea what this is about, but Amicus told me it wasn't their issue.

Windows Update error message 84B30001 - SQL Server 2008 SP2 update fails

  

I am running Windows 7 Professional on a 64 bit platform and have Windows update on and selected to notify me when updates are available.  The other day, I received an error message that an update failed to install properly.  The update that failed is to update SQL Server 2008 SP2 - KB 2285068.  I have made several attempts to retry this update with the same result.  When I Googled the error message, all of the responses deal with the SQL Server 2008 SP1 update not SP2.  Couldn't find a solution to this problem - nor could I find one in the KB article - which basically explains details of SP2 and DOES give me the option to instal SP2 from here.  Don't want to take the chance and download it from here - maybe I should though.  Can usually find a solution to a Windows update error in Google - can't find one this time.

Any suggestions?


Jim Cutrara

Jim Cutrara

Inserting personal error message in ValidationSummary

  

Hi,

I am creating a web form that requires a lot of validation. I use many of the validation control in asp.net already like RequiredFieldValidator and CompareValidator. 

My Problem: after my custom validation for the value entered return an error message, and I pressed enter key when the field is empty, my custom error message is overlapped by my ValidationSummary. 

Setting my custom error to visible = false on button click also does not seem to work as it requires for me to enter the value first.

This made me think, is there a way to insert my custom validation inside the ValidationSummary as an error message like for other validation control?

Thanks in advance


create user wizard login error message dont show in a message box?

  

hi

 

i am using create user wizard and capturing other information within content template when a new user

registers. Some of the textboxes are binded to required field validators.

 

there is a validation control on the page and ShowMessage box is True.

If they dont complete some of the text boxes then the message box pops Up with the error message.

It does not however include information errors like "User already exists" or Email address already exists

from the create user wizard membership  UserName and Password Textboxes

 

is it possilbe to hook all of these up so I get one message box with all errors including membership ones?

 

thanks

 


Error upgrading SQL Server 2008

  

i was normally using VS2005 and SQL server 2005...

i upgraded to SQL Server 2008... and then...

i could not build my project anymore... because of this error:



Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. 
Exception Details: System.IO.FileNotFoundException: The specified module could not be found. (Exception from HRESULT: 0x8007007E)
Source Error: 

Very Basic Question - Error message running first page

  

Hi Everyone,

I am running Windows 7 and I have gone into Control Panel and activated all of the IIS Functions.

The web application I am running was downloaded from the net (and has worked on other machines previously).  Once I downloaded it, I moved it into C:/inetpub/wwwroot/code/main.asp

I am a bit of a novice at this!  But I am hoping someone can point me in the right direction!

 

I get the following error when I try and run the web application through IE:

"An error occurred on the server when processing the URL. Please contact the system administrator. If you are the system administrator please click here to find out more about this error."

(When i click the "click here" button it just goes to the IIS site).

 

Appreciate any help I can get!

Thankyou!

 

 


Localize framework message from xml validation error

  

I need to validate an XML through XSD. I am using XMLReader (with XmlReaderSettings and 

Validation_EventHandler to do it). Depend on users preference, I would like to change the output message generated by  Validation_EventHandler in french or english.

Any idea on how to perform this?

 

Thanks

Bert

 


Compiler Error Message : CS0006: Metadata file 'System.EnterpriseServices.dll' could not be found

  

I get this error when i Debug my web application....

error

I followed these steps.,

  • Ended the aspnet_wp.exe process in the Windows Task Manager
  • Then deleted the application`s folder in C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Temporary ASP.NET Files\
  • Then started Visual Studio 2008 again

I also rebooted my system but no use....

Plz help !


Error Message when trying to open crystal report

  

Logon failed. Details: 42000:[Microsoft][ODBC SQL Server Driver][SQL Server]Cannot open database "DATA" requested by the login. The login failed. Error in File C:\Windows\TEMP\NewQuote {573CE511-64B7-4161-B9DF-0E58EB1EDA19}.rpt: Unable to connect: incorrect log on parameters.

I get the above message when loading the crystal report from the Intranet via IIS but it works fine from the localhost the report loads ok and picks up my parameters.  This is my Code behind Page.

Protected Sub form1_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles CrystalReportViewer1.Load

        Dim Count As Int32
        Count = Int32.Parse(Label1.Text)

        Dim ConnInfo As New ConnectionInfo
        With ConnInfo
            .ServerName = "\\Server1\Sqlexpress"
            .DatabaseName = "DATA"
            .UserID = "sa"
            .Password = "1181

Weird security configuration error message

  

Recently something has gone wrong with our website so that whenever you try to access an aspx file, it shows the following error:

 

Server Error in '/RALSWeb' Application.


Configuration Error

Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.

Parser Error Message: Access is denied: 'RalsWeb'.

Source Error:

 
Line 256:                <add assembly="System.EnterpriseServices, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"/>
Line 257:                <add assembly="System.Web.Mobile, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"/>
Line 258:                <add assembly="*"/>
Line 259:            </assemblies>
Categories: 
ASP.NetWindows Application  .NET Framework  C#  VB.Net  ADO.Net  
Sql Server  SharePoint  Silverlight  Others  All   

Hall of Fame    Twitter   Terms of Service    Privacy Policy    Contact Us    Archives   Tell A Friend