.NET Tutorials, Forums, Interview Questions And Answers
Welcome :Guest
Sign In
Register
 
Win Surprise Gifts!!!
Congratulations!!!


Top 5 Contributors of the Month
Kaviya Balasubramanian
Sgraph Infotech
Imran Ghani
Post New Web Links

Parser Error Message : Code blocks are not allowed in this file

Posted By:      Posted Date: October 22, 2010    Points: 0   Category :SharePoint
 
I've used inline coding in my javascript functions to get the clientID of the controls in the runtime as

 <%= ctrl.ClientID %>

But i'm getting the parser error. Also i'm getting

"The event handler OnClick is not allowed in this page".

So i modified the web.config to add a page parser -

<PageParserPaths>
        <PageParserPath VirtualPath="/*" CompilationMode="Always" AllowServerSideScript="true" IncludeSubFolders="true" />
</PageParserPaths>

But i'm still getting the same error. I've cross checked lot of times whether i'm modifying the correct web.config.

Any ideas?

Regards,
Raghavendra


View Complete Post


More Related Resource Links

Parser Error Message: Could not load type MasterPage File

  

 

Server Error in '/' Application.

Parser Error

Description: An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately.

Parser Error Message: Could not load type 'wamsilverlight.Web.Wam'.

Source Error:

Line 1:  <%@ Master Language="C#" AutoEventWireup="true" CodeBehind="Wam.master.cs" Inherits="wamsilverlight.Web.Wam" %>
Line 2:  
Line 3:  <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">


Source File: /Wam.Master    Line: 1


Version Information: Microsoft .NET Framework Version:2.0.50727.4952; ASP.NET Version:2.0.50727.4927

 

All of the following have been tried over and over again:

1.) Delete all existing .dlls

2.) Delete MasterPage File and recreate it.

3.) Delete MasterPage perform a c

Performance Point: Code blocks are not allowed in this file.

  
Hi All,I'm trying to use Performance Point 2010 in Sharepoint 2010...I have start the application in centrel adminI have created a site collection based on the Bisuness Intelligence Center templateI can surf the new Site Collection but when I try to open the "Start using PerformancePoint Services" link I get the following error:"An error occurred during the processing of /PerformancePoint/Pages/ppssample.aspx. Code blocks are not allowed in this file."is there any way to fix it???is there any good source to understand and deploy Performance Point 2010??thanks AllVit

Parser Error Message: Could not load file or assembly 'AjaxControlToolkit.dll' or one of its depen

  

Hi...

Server Error in '/AJX' Application.

Parser Error

Description: An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately.

Parser Error Message: Could not load file or assembly 'AjaxControlToolkit.dll' or one of its dependencies. The system cannot find the file specified.

Source Error:

[No relevant source lines]

Source File: none    Line: 0

Assembly Load Trace: The following information can be helpful to determine why the assembly 'AjaxControlToolkit.dll' could not be loaded.

WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableL

Compiler Error Message : CS0006: Metadata file 'System.EnterpriseServices.dll' could not be found

  

I get this error when i Debug my web application....

error

I followed these steps.,

  • Ended the aspnet_wp.exe process in the Windows Task Manager
  • Then deleted the application`s folder in C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Temporary ASP.NET Files\
  • Then started Visual Studio 2008 again

I also rebooted my system but no use....

Plz help !


Using tabs from the AjaxControlToolkit causes error: ...control contains code blocks (i.e. <% ... %>

  

I'm getting the error:

The Controls collection cannot be modified because the control contains code blocks (i.e. <% ... %>).

When attempting to add the tabs from the AjaxControlToolkit.  A little background..Theres an existing aspx page in a microsite which used the accordion control and the tabbed control ...I need to modify this page to use a different masterpage. 

The original site was .Net Framework 2.0 and the page in question used AjaxControlToolkit 1.0. which I manually installed originally.  Some of the site has been further developed using the .Net Framework 3.5.  (Come with AjaxControlToolkit) Now I have come to update this aspx page and I get the error above.

I have narrowed the down to the TabContainer (I think)  Does anyone have any experience with this sort of problem?  Also what version of the AjaxControlToolkit should be with the .Net Framework 3.5? I have 1.0.20229.20821. 

I also tried to browse to the AjaxControlToolkit.dll to add the tools to the tool box as they're missing... thinking this may be an indicator as to why it wasn't working. I get the error: 'There was an error loading types from assembly C:\inetpub\wwwroot\project\Bin\AjaxControlToolkit.dll Could not load file or assembly 'System.Web.Extensions. Version=

WSS2.0 opening pdf documents an error message appears: The document could not be saved. The file may

  
Hi All,. In a WSS2.0 document library, a user is trying to open pdf files. However, an error message is displayed: 'The document could not be saved. The file may be read only, or another user may have it open. Please save the document with a different name or in a different folder'. No one else has the file open. When the user saves the file using Save As (as it is apparently Read Only) and then saves the file back to the SharePoint site, all previous versions of the file disappear. The user has noted that this has been happening since today, and she had some other network issues that have been resolved. No other users are experiencing this problem.  Not sure if this problem is related to the network problems the user was facing. I've had the user reboot but this has not resolved it. Any ideas?

i make a web site using frame but session is expire Error message is my Config file is attache

  
i make a web site using frame  but session is expire message is Object reference not set to an instance of an object Description: HTTP 500. Error processing request. Stack Trace: System.NullReferenceException: Object reference not set to an instance of an object at System.Web.UI.Control.OnLoad (System.EventArgs e) [0x00000] in <filename unknown>:0 at System.Web.UI.Control.LoadRecursive () [0x00000] in <filename unknown>:0 at System.Web.UI.Page.ProcessLoad () [0x00000] in <filename unknown>:0 at System.Web.UI.Page.ProcessPostData () [0x00000] in <filename unknown>:0 at System.Web.UI.Page.InternalProcessRequest () [0x00000] in <filename unknown>:0 at System.Web.UI.Page.ProcessRequest (System.Web.HttpContext context) [0x00000] in <filename unknown>:0 My Web Config file is<configuration>    <!-- store the database connection info here -->     <appSettings>        <add key="sBook_StoreDBConnectionString" value="Provider=Microsoft.Jet.OLEDB.4.0;User ID=Admin;Data Source=C:\Program Files\CodeCharge\Examples\BookStore\BookStore_MSAccess.mdb;Persist Security Info=False" />            </appSettings>  <system.web>  <httpRuntime executionTimeout=&quo

.NET 3.5 SP1 failed with the error message - Error code 1603 for this component means Fatal error du

  
I had Beta version of VS 2008 and I wanted to install .NET 3.5 SP1. Installation led to some serious problems. I tried almost everything to install .NET 3.5SP1 (or VS 2008 SP1), nothing works

* VS 2008 has been uninstalled
* 3.5 uninstalled and cleaned
* 3.0 uninstalled and cleaned
* WF components removed
* document manager components removed

when I try to reinstall 3.5SP1, I keep receiving the following error in dd_dotnetfx35error

[01/11/09,00:23:05] XPSEPSC Installer: [2] Error code 1603 for this component means "Fatal error during installation.
"
[01/11/09,00:23:06] XPSEPSC Installer: [2] Setup Failed on component XPSEPSC Installer
[01/11/09,00:23:32] WapUI: [2] DepCheck indicates XPSEPSC Installer is not installed.

Then I check the contents of dd_dotnetfx35install for the event error log and found the following
[01/11/09,00:23:05] XPSEPSC Installer: ***ERRORLOG EVENT*** : Error code 1603 for this component means "Fatal error during installation.
"
[01/11/09,00:23:05] Setup.exe: AddGlobalCustomProperty
[01/11/09,00:23:06] XPSEPSC Installer: ***ERRORLOG EVENT*** : Setup Failed on component XPSEPSC Installer
[01/11/09,00:23:06] Setup.exe: GetGlobalCustomProperty - Property: {BBE1827C-F2FD-4FDA-A6D6-C83B62FFFDCA} - PropertyName: compfailed - Value: 0
[01/11/09,00:23:06] XPSEPSC Installer: CBa

Parser Error Message: Could not create type 'Service'.

  

My web service works fine on my local machine but when i put it on the server it throw this error:

Parser Error Message: Could not create type 'Service'.

I don't know how to fix this.


Getting error message and other data back from SSIS to managed code

  

Hi,

 

From a SharePoint workflow we are trying to synchronously execute an SSIS package - which seems to work - and display error messages and return some variables back to SharePoint.

 

I followed the "Running a Package Remotely by Calling a Remote Component or Service" instructions on http://msdn.microsoft.com/en-us/library/ms403355.aspx and executing and parameterizing the package does not seem to be a problem. But the SSIS package does a lot of plausibility checking and raises an error (RAISERROR in T-SQL or Error

OCIEnvCreate failed with return code -1 but error message text was not available.

  

Hi,

We have a requirement to connect to oracle from ASP.NET and we installed ODAC(ODAC1110621) components  on the server but still we are getting the following error while opening the connection. Please find the details below:-

OCIEnvCreate failed with return code -1 but error message text was not available.

Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.Exception: OCIEnvCreate failed with return code -1 but error message text was not available.

Source Error:

Line 16:     {
Line 17:         OracleConnection con = new OracleConnection(ConfigurationManager.ConnectionStrings["HRDBA"].ConnectionString);
Line 18:         con.Open();
Line 19:         Label1.Text = con.State.ToString();
Line 20:         con.Close();


Source File: \\hs003fs01-02.homebase.com\wfmp\Webpage1.aspx.cs    Line: 18

Stack Trace:

Parser Error Message:

  

I am brand new at ASP.Net but thought I could give this a go.  Right off the bat, I get this following error:

Parser Error Message: Could not load type 'WebApplication1._Default'.
Line 1:  <%@ Page Language="vb" AutoEventWireup="false" CodeBehind="Default.aspx.vb" Inherits="WebApplication1._Default" %>
Line 2

I have tried removing the Inherits="WebApplication1._Default" and then I get the following error:

Parser Error Message: Could not load file or assembly 'System.Web.DataVisualization, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.

I have not been able to find anything on the web that seems to shed any light on this for me.  I'm trying  allow a user to input some metric data, then create a graph using that data.

Any help would be great!

Thanks,
Vic

 




Compiler error in a generated code file?

  

So one of my views refuses to display, instead throwing up an error about an unreferenced assembly in a generated code file.

Here's the controller action:

using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.Mvc;
using System.Web.Security;
using CindySanabria.Domain;
using System.Diagnostics;

namespace CindySanabria.Controllers
{
    public class ProfileController : Controller
    {
        private IMembersRepository _membersRepo;

        public ProfileController(IMembersRepository repo)
        {
            Debug.WriteLine("Constructing ProfileController");
            this._membersRepo = repo;
        }

        //
        // GET: /Profile/Create
        [Authorize]
        public ActionResult Create()
        {
            Debug.WriteLine("Running Create action");
            return View();
        }
    }
}

And here's the view:

<%@ Page Language="C#" MasterPageFile="~/Views/Shared/Site.Master" Inherits="System.Web.Mvc.ViewPage<CindySanabria.Domain.Member>" %>

<asp:Content ID="Content1" ContentPlaceHolderID="TitleContent" runat="server">
	Create Profile
</asp:Content>

<asp:Content ID="Content2" ContentPla

No error message available, result code: E_FAIL(0x80004005).

  

Hi,

 

I am importing data from Excel to SQL. It works perfectly Locally.... but when its been uploaded to the server it gives this error.

Another thing, when I use less data(in excel) and import, then it works. But when I import LARGE amounts of data, it gives the above error.

 

Any assistance would be greatly appreciated :)

 

Thanks


Restore Job has been failed with error message as "Skipped log backup file. Secondary DB"

  

We have already configured log shipping on server. But now restore job failed with error message as "Skipped log backup file. Secondary DB"

Kindly provide resolution steps for same.


Inserting personal error message in ValidationSummary

  

Hi,

I am creating a web form that requires a lot of validation. I use many of the validation control in asp.net already like RequiredFieldValidator and CompareValidator. 

My Problem: after my custom validation for the value entered return an error message, and I pressed enter key when the field is empty, my custom error message is overlapped by my ValidationSummary. 

Setting my custom error to visible = false on button click also does not seem to work as it requires for me to enter the value first.

This made me think, is there a way to insert my custom validation inside the ValidationSummary as an error message like for other validation control?

Thanks in advance


create user wizard login error message dont show in a message box?

  

hi

 

i am using create user wizard and capturing other information within content template when a new user

registers. Some of the textboxes are binded to required field validators.

 

there is a validation control on the page and ShowMessage box is True.

If they dont complete some of the text boxes then the message box pops Up with the error message.

It does not however include information errors like "User already exists" or Email address already exists

from the create user wizard membership  UserName and Password Textboxes

 

is it possilbe to hook all of these up so I get one message box with all errors including membership ones?

 

thanks

 


Categories: 
ASP.NetWindows Application  .NET Framework  C#  VB.Net  ADO.Net  
Sql Server  SharePoint  Silverlight  Others  All   

Hall of Fame    Twitter   Terms of Service    Privacy Policy    Contact Us    Archives   Tell A Friend