.NET Tutorials, Forums, Interview Questions And Answers
Welcome :Guest
Sign In
Register
 
Win Surprise Gifts!!!
Congratulations!!!


Top 5 Contributors of the Month
satyapriyanayak
SP
Sambanthamoorthy
Ashutosh Jha
Imran Ghani
Post New Web Links

Cluster Fail-over - Failed to bring secondary node online ??

Posted By:      Posted Date: October 19, 2010    Points: 0   Category :Sql Server
 

Hi

Server : Windows server 2008

DB Server : SQL Server 2008 (SP1)

 

Here are the series of events which happened.

1.) Event ID: 1135

Cluster node 'XYZ' was removed from the active failover cluster membership. The Cluster service on this node may have stopped. This could also be due to the node having lost communication with other active nodes in the failover cluster. Run the Validate a Configuration wizard to check your network configuration. If the condition persists, check for hardware or software errors related to the network adapters on this node. Also check for failures in any other network components to which the node is connected such as hubs, switches, or bridges.

2.) Event ID: 1049

     Cluster IP address resource 'SQL IP Address 1 (XYZ)' cannot be brought online because a duplicate IP address '10.9.8.113' was detected on the network.  Please ensure all IP addresses are unique.

3.) Event ID: 1069

     Cluster resource 'SQL IP Address 1 (XYZ)' in clustered service or application 'SQL Server (MSSQLSERVER)' failed.

4.) Event ID: 1049

     Cluster IP address resource 'Cluster IP Address' cannot be brought online because a duplicate IP address '10.9.8.112' was detected on the network.  Please ensure


View Complete Post


More Related Resource Links

SQL node remove failed on Cluster :The state of your SQL Server installation was not changed after t

  
HI guys , Have you faced this .I am not able to remove the SQL Server 2008 ENT node .The error is : Overall summary:   Final result:                  Failed: see details below   Exit code (Decimal):           -2068643838   Exit facility code:            1203   Exit error code:               2   Exit message:                  The state of your SQL Server installation was not changed after the setup execution. Please review the summary.txt logs for further details.   Start time:                    2010-09-12 09:40:40   End time:                      2010-09-12 09:48:26   Requested action:              RemoveNode The details.txt shows the same error in a different way : Running Action: CloseUI 2010-09-12 09:44:44 Slp: Stop action skipped in UI

Cluster service takes 1 hour to bring service and applications online

  

We had a 1 hour outage with our production SQL cluster recently and I have been trawling through the Event Logs to try and find an explanation.  I know that a network failure actually triggered the outage, during a switch upgrade no network was available and so the cluster shut down:

"This cluster node has no network connectivity. It cannot participate in the cluster until connectivity is restored. "

There are lots of enties telling me that the cluster service is stopping and one saying that DTC is terminating unexpectedly which is fine, but then I see a log enty:

"The system failed to flush data to the transaction log. Corruption may occur"

This is worrying - how can I be sure that my data is not corrupted?

I can see the SQL Server and SQL Server Agent services '"terminate unexpectedly" and shortly after that I can see the cluster service entering the running state and various attempts to bring clustered applications online.  These attempts give the following messsage:

"The Cluster service failed to bring clustered service or application 'SQL Server (INSTANCENAME)' completely online or offline. One or more resources may be in a failed state. This may impact the availability of the clustered service or application."

Does this mean that the cluster service does no

SQL server 2008 cluster install error - The resource failed to come online due to the failure of o

  

Hi ,

I ran into the following error when trying to install sql server 2008 cluster (node 1) on windows 2008

The resource failed to come online due to the failure of one or more provider resources. (Exception from HRESULT: 0x80071736)

Any insight on this issue is greatly appreciated

 

Ping

 

 


Error while adding 3rd node to a cluster --- Failed to retrieve data for this request.

  

Inside a virtual environment running Windows 2008r2 Ent SP1 and SQL 2008r2 RTM.

Inintial cluster build has gone smoothly for a 2 node cluster using iSCSI. Added up a third node to this cluster manually changed quorum model and MsDTC resource was bouncing all well on the three nodes. Sweat started when the third node failed to add into SQL Failover cluster with the given message "Failed to retrieve data for this request" right after clicking add a node.

Sites talk about adding CuP6 and to lower the security but to note all this worked for first & when adding second node, for the moment this was resolved for me after I restarted all the nodes; going from Node3 to 1. For a moment RemoteRegistry service failed to start on node2 and it wount work even on restarts so moved every thing to node1 now the RPC was up on Node2 and I can go further on adding node3 to SQL cluster but as I'm typing it failed again.

As I check the logs they point about failures to write to registry and at time Network Path not found, User credentials used are all same and pings are going well for the entrire set of IP's I have.

Any insights on this are highly appreciated?


yup

SQL cluster resources getting failed often

  
Hi We have an active-passive cluster setup in our environment for the SQL application. Both the servers are windows 2000 SP4. In the last 24 hours the SQL cluster resources have failed twice. I am not sure of the correct tme nor the correct log location of where the resources failed.Please find below the cluster logs of the day on which the failure happened. Please find the logs in the below link: http://rapidshare.com/files/414371495/New_Text_Document__2_.txt

SQL 2008 64 Bit 2 node cluster

  
I wanted to get some feedback on how much memory and CPUs I needed for each node in a 2 Node Cluster. The operating System will be Windows 2008 R2 64 bit Enterprise and the SQL version will be SQL 2008 R2 64 Bit. It will have a total of 8 instances of SQL Server. 2 of those instances will be SQL Server Reporting Services ( 1 SQL Native and the other SharePoint enabled). This cluster will have both nodes in a virtual enviroment. Any feedback would be greatly appreciated.

Adding second node to SQL Server cluster fails.

  
I have successfully created a MSCS cluster and I have the SQL cluster up and running on the first node.   When I put the install cd in the second node and go through the install it fails with the error SQL Server Setup has encountered the following error:  Object reference not set to an instance of an object. I'm assuming I get this error because on the cluster node configuration screen the "cluster network name" box is blank.   It won't let me select a name or type a name. The SQL cluster is up and running on the first node.   I can ping the sql cluster network name from both boxes.   The setup shows the installed node and the node I"m trying to add, so I don't see any problem. I have Windows 2008 R2 on both nodes and I'm installing SQL Server 2008 R2.   Any idea how I can get past this error?    Thank you.

Adding thrid Node to SS2K8 cluster fails on adding fileshare

  
I am attempting to add a third node to a two node cluster. I am using the SS2K8 SP1 slipstream I used to successfully install the other two nodes. The new node of the cluster is:  Hardware: Dell R610 blade  OS: Windows Server 2008 R2 Enterprise 64 bit SQL: SQL Server 2008 SP1 64 bit Enterprise. The two node system has been running for months without problems. How do I fix a failure to add a file share for filestream because the value of group was null (Bold Italics below)? I have not found anything on the web that addresses this problem. Brad The bootstrap summary file woes content(s): Detailed results:   Feature:                       Database Engine Services   Status:                        Failed: see logs for details   MSI status:                    Passed   Configuration status:          Failed: see details below   Configuration error code:      0x11428655   Configuration error description: Value cannot be null.  Parameter name: group &nbs

Hosting WCF Services (NetTcp and WS-HTTP) on a windows MCSC fail over cluster

  
Hi I have a set of WCF Services that use the above protocols. How do i host these in a MCSC Cluster and expose them to the clients ? When hosting the service which is the IP i should use ? The Virtual IP of the Cluster ?

network configuration and best practice for 2 node cluster

  
For our 2 node cluster i have set the following: Node 1 nic 1 : 192.168.0.101, 255.255.255.0, 192.168.0.1 Node 1 nic 2: 10.10.10.101, 255.255.255.0 node 2 nic 1: 192.168.0.102, 255.255.255.0, 192.168.0.1 node 2 nic 2: 10.10.10.102, 255.255.255.0 Is this a configuration of good practice?? how does the cluster know which subnet to use as the private and which one to use as the public? The cluster IP should belong to the public subnet, for ex: 192.168.0.150. But what about the MSDTC?? should it have an Ip of the public subnet or private subnet? Thanks.

SQL Management Studio not on Passive Node SQL 2008 Cluster

  
Hello, I would like to be able to use SQL Management Studio on the passive node in our cluster if there's a failover and Passive Node becomes Active Node.  It seems like the Add Node install didn't load SQL Management Studio on our passive node. Any help is appreciated. Thanks,  Morrisos

Failed to decrypt protected XML node "DTS:Password" with DontSaveSensitve Checked

  

All,

I have been researching and researching this.  First, I have all my packages all have the protection level set to DontSaveSensitive.  Second, all my passwords are stored in a config file.  This config file location is stored in an env variable.  The packages are all calling the config files from package configurations.

If I do the development on our dev server I dont' have a problem. As soon as I go to our test box, I get the error or if another person accesses it and tries to run it they get the error.

I have no idea to fix this.  The only solution I have found anywhere is to change the protectionlevel.  Changing it to rely on server gives me more error messages.  I honestly don't remember having this issue before now.

please help!

Thanks,

Mindy


Error Adding 2nd Cluster Node - Account Name Box Greyed Out

  

I am in the process of setting up a 2008 R2 SQL cluster using SQL 2008 R2.  I have the first node up and running, and all is well.  Going through the process to the add the 2nd node, I am stuck.

At the part where you configure the SQL service accounts, the SQL server agent account is greyed out.  Hovering your mouse over it shows that field as "Read-Only"  The box for the password you can type in, so I went ahead and put in the password I used for the account on the first node.  (it's a domain account with the corect privledges).  On the database engine section it lets me select my domain account and then I put in the password.  Clicking next gives me an error stating that the "Credentials you provided for the SQL Server Agent service are invalid."  

I know the password is correct, but without the accout name box being greyed out, I am not sure it is pointing to the right account.  Other people too are having this issue:  http://social.msdn.microsoft.com/Forums/en-US/sqlsetupandupgrade/thread/aae80395-7d29-4a07-a1b7-29959e78d382   What is marked as a solution on that thread really isn't.  Follow up posts show other people at the same spot I am.

SQL 2005 SP3 w/KB970892 installed on Cluster can't add new node.

  

We have SQL 2005 Enterprise Cluster, the cluster is running SP3 with the KB970892 hotfix installed. Using Cluster administrator "add new" node, then via Add\Remove programms add SQL node, all is good to this point. However the new node has the RTM EXE and if I try to run the SP3 from the active node w/KB I can't select the MSSQLServer option because "The product instance MSSQLServer been patched with more recent updates", if I try to fail the server over to the new node and install the SP3 I get "failed, no passive nodes updated" and the RTM node also does not update.

 

 


Categories: 
ASP.NetWindows Application  .NET Framework  C#  VB.Net  ADO.Net  
Sql Server  SharePoint  Silverlight  Others  All   

Hall of Fame    Twitter   Terms of Service    Privacy Policy    Contact Us    Archives   Tell A Friend