.NET Tutorials, Forums, Interview Questions And Answers
Welcome :Guest
Sign In
Win Surprise Gifts!!!

Top 5 Contributors of the Month
Sandeep Singh
Post New Web Links

reassignment in sequential workflow

Posted By:      Posted Date: October 17, 2010    Points: 0   Category :SharePoint



I created sequential workflow(sharepoint2010,visual studio2010) with multi level for approving ,workflow must repeat 2 times in one level..i used sequence activity in while activity for reassigning task but workflow when to enter this sequence(in second) ,this  not send email notification and workflow do not entered in while(while for checking complete task)


what i doing  for solve this problem?


please give me suggestion

View Complete Post

More Related Resource Links

Sequential Workflow project unable to compile referencing x64 Workflow Activity Library

Folks -   I have an sequential workflow project targeting x64 that will not compile if the workflow activity library that it references is compiled for x64 (it will compile if the activity library targets x86).  The compile error I receive is: Compilation failed. Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information. [project name]   Any thoughts on how to figure this out?   Thanks.

Share Point Designer 2007 Workflow (Sequential) - multi-collect data from user

I am currently building a multi-step workflow using ShrePoint designer for MOSS2007. I am getting a bit confused as to if I have an error or if I am doing something incorrect. Here is what I have going. My workflow consists of something similar to the following New document comes in, a collect data from user routine is ran and assigned to a reviewer. My understanding when I create a collect data from user WorkFlow step is any data I request is saved in the "Tasks" list. Therefore I need to grab the workflow task ID in order to later lookup what the reviewer submitted... I understand this...   However, I have one more collect data from user workflow step and I have one more item to collect. Even though this is a brand new collect data from user workflow step - does the collected data still go into the "Tasks" list? In other words, if I have two steps in a workflow and both of these steps are "collect data from user", does the data from both steps go into the same "Tasks" list?  I could see how this might be possible as long as the Task list columns contain all the items for all the different "collect" data from user steps.  I don't see two different Tasks lists representing or named "Reviewer" or "Final" or anything, so I assume the items are all in "Tasks"   However..

sequential workflow + Active directory

Hi, i wanna get manager name of the login users in visual studio sequential workflow... Thanks ___________ arWINdh

Urgent- How to show sequential workflow on asp.net web page dynamically

Hi All,My basic question is how can we show a sequential workflow diagram on asp.net web page dynamically. using WWF can we do this?. i have gone throgh the some of forums/articles but i could not find right information anywhere. please suggest me the right path to achieve this.

Visual Studio 2008 Professional v.s. Standard - support SharePoint 2007 sequential workflow?


I would like to ask if VS2008 Standard edition support the project type of SharePoint2007 sequential workflow?

I have a VS2008 Professional edition and it is Ok to create SharePoint2007 sequential workflow project and deply to MOSS2007 successfully.

Is it possible in a VS2008 Standard edition?

Thanks in advance.

Problems when deploying sequential workflow with association Infopath form of sharepoint 2010 using


I’ve create a workflow project with infopath in it. And I get the error

 “Error occurred in deployment step 'Activate Features': Unable to locate the workflow's association data. To restore the association data to the workflow, restart the workflow settings wizard by selecting the workflow node in Solution Explorer and then clicking the ellipsis button (…) on one of the properties in the Properties window that has an ellipsis button.”

I'd really appreciate of any help.

SharePoint 2007 Sequential Workflow in Visual Studio



I've got a problem of creating Sharepoint 2007 Sequential Workflow via Visual Studio 2008.

I have a Visual Studio 2008 on my machine which is not the server machine (Window XP) and a server which has SharePoint Server. I had been assigned task to work on Sharepoint Workflow. So, I have decided to create a project on my Visual Studio 2008, Sharepoint 2007 Sequential Workflow. But, I got the problem down here which blocked me. 

"32-bit version of SharePoint Server is not installed. Please install a 32-bit version of SharePoint Server"

and following error in other system:

"Could not load file or assembly 'Microsoft.SharePoint, Version=, Culture=neutral, PublicKeyToken=71e9bce111e9429c' or one of its dependencies"

- I am also not allowed to install Visual Studio 2008 on the server.

- I could not install Sharepoint Service 3.0 or SharePoint Server on my machine.

I hope you some body could help me with this matter.


Sequential workflow with user input in SPD 2007


I'm just getting in to workflows, so I assume this will result in a simple "do this" or "use VS" answer... anyways..

I am looking to create a sequential workflow in SPD 2007 for MOSS 2007 that will basically be a 5+ step approval workflow.  It will start either on-demand or when a new item is created in a list.  The first part will prompt a user to enter one or more reviewers, then the workflow will route the document through the specific reviewers and several static reviewers.  Each person will accept or deny the document, and write comments as necessary.  The only part I am having trouble with is prompting the user for reviewers, and then properly routing the document to those reviewers.  I have tried to collect the data via an initiation parameter, and I have tried to collect it as an action without much luck.  If possible, what’s the best way to do this without resorting to using VS?




Sharepoint sequential Purchase Requisition workflow using expense total to determine approvers


I am working on a sequential workflow in VS2008 that needs to determine approvers based on the total expense field entered in the PO form (Infopath 2007).  Right now I have the form set as a browser-based form associated with a document library to kick off the workflow.  The tricky part is the approval logic needs to pull approvers from SQL server 2008 tables and I am struggling with best approach---should this be a separate task form and module that uses the submitted data (classes formed from an init form)?  If so, are there any examples out there using SQL-based queries on HR hierarchy data to work from?


use the default sql services in a console sequential workflow application


Hello all,

I have configured my console workflow application to use the default sql service. However, when I run it in VS2008, it generates a TypeLoadException:

"Can not load type "System.Workflow.Runtime.Hosting from assembly System.Workflow.Runtime, Version=3.0.0000.0, Culture=neutral, PublicKeyToken=xxx"

So, my concern is

  1. How to configure a workflow application to use the default sql service?
  2. Are there any requirements for SQL version? Is there any settings we need to configure in SQL server?

Some tips

  1. my current app.config file looks like this:
    <?xml version="1.0" encoding="utf-8" ?>

sequential workflow Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))



   When i am creating a Sharepoint  sequential workflow  it is gives the

Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))

PLease can you guys help.




Upgrade Sharepoint 2007 Custom State Machine/Sequential workflow to SharePoint 2010



What's the path for upgrading the SharePoint 2007 Custom State Machine/Sequential workflow to SharePoint 2010 when the current SharePoint 2007 environment is upgraded to SharePoint 2010 by an inplace upgrade?

What's the typical estimate time for upgrading SP2007 custom workflow to SP2010 custom workflow?  My gut says 40 to 80 hrs or even less than that, what’s your thoughts?

FYI...I tried to upgrade the SharePoint custom workflow built using visual studio 2008 in SP2007 environment to visual studio 2010 solution/project in SP2010 environment, I got the error messages to refer the following dll's

Microsoft.SharePoint.dll and Microsoft.SharePoint.WorkflowActions.dll

Even after referring the new dlls still the workflow design doesn't show up in the canvas...still work on this to fix mean while want to know the experts insights on this.

How to find out newly generated Task Id in Sequential WorkFlow

I have following scenario...

Have a replicator activity to create multiple tasks
However I dont want to send OOB notifications. So I have added Sedmail.
Challange is to know the newly generated task Id after the create task execution. Note that Replicator exectutes create task number of times of count in InitData object.

Also I can not use OnTaskCreated activity as it has issues working with replicator...

Any Solutions?

Changing the Deployment server of a sharepoint sequential workflow


Apologies if i have posted this in the wrong forum. I have a couple of sequential workflows that i have created and deployed to our test sharepoint site and am now ready to put them onto our live server which is on a completely different machine.

How do you change the deploy location of the workflow so that when its deployed its sent to the new server rather than the one set when first creating the workflow.



Add additional approvers to running sequential workflow


Hi, Is it possible to add additional approvers to a running workflow instance? I am using Visual Studio 2008. I see out-of-the-box SharePoint approval workflow has functionality to add participants after workflow starts. In SharePoint approval workflow When I add new approver it does not create new workflow instance rather uses the current running workflow instance and creates new tasks for additional approvers. I am looking to achieve same functionality. I have tried EnableWorkFlowModification Activity -> OnWorkflowModified -> CreateTask. However when I debug code through Visual Studio it does not throw any errors but when I look at workflow status I see "An error has occur..".

Please can anyone help me?



Free Series of SharePoint Workflow How-to Videos

This is the series of "How to" Document Workflow with SharePoint using Visual Studio 2008 (using the .NET Framework 3.0 for backward compatibility to Visual Studio 2005). I have created video's that show the most common requests that I have seen around MOSS/SharePoint 2007 workflow & document workflow.

Sequential Diagram

Gives Total Exposure On Sequential Diagrma
ASP.NetWindows Application  .NET Framework  C#  VB.Net  ADO.Net  
Sql Server  SharePoint  Silverlight  Others  All   

Hall of Fame    Twitter   Terms of Service    Privacy Policy    Contact Us    Archives   Tell A Friend