.NET Tutorials, Forums, Interview Questions And Answers
Welcome :Guest
Sign In
Register
 
Win Surprise Gifts!!!
Congratulations!!!


Top 5 Contributors of the Month
Kaviya Balasubramanian
Imran Ghani
Post New Web Links

Backup sqlserver 2008 express in VS2010

Posted By:      Posted Date: October 16, 2010    Points: 0   Category :WPF
 

Hi

i serach for back up of data base from code in my wpf application

i find many article but that wasent complate ,

ok

how can i craete backup from sqlserver 2008 express in VS 2010

thanks




View Complete Post


More Related Resource Links

Unable to Backup Service Master Key on SQL 2008 Express

  
Hi I am attempting to do a backup of the Server Master Key but it fails. The error message I am receiving is as follows: Msg 15240, Level 16, State 1, Line 1 Cannot write into file 'C:\Users\harvey norman\Documents\SQL Server Management Studio Express\SQLEXPR2008ADV_ServerMasterKey'. Verify that you have write permissions, that the file path is valid, and that the file does not already exist. The PC I am running SQL 2008 Express (64 bit) is running on Vista Ultimate (64-bit) SP2. The SQL I wrote is as follows: BACKUP SERVICE MASTER KEY TO FILE = 'C:\Users\harvey norman\Documents\SQL Server Management Studio Express\SQLEXPR2008ADV_ServerMasterKey' ENCRYPTION BY PASSWORD = '??' GO Note that the ?? represents the password but is not actually the password for obvious reasons. I am logged in to the PC as a user with Admin permissions.  I had a look at the destination folder, and it shows I have full control. So, I am mystified. If somebody could advise me I would really appreciate it. Many thanks in advance. Kind regards Ross Ross

Upgraded to SQL Server 2008 Express R2 64bit and now all my VS2010 db apps won't run

  
I am running WIN764bit, VS2010 and just "upgraded" from SQL server 2005 to SQL Server 2008 Express R2 64 bit.  When I went back into VS2010 and tried to run and test several database apps that I have developed, I find that I keep getting the error "Failed to generate a user instance of SQL server due to a failure in starting the process for the user instrance".  I have read a lot of threads here but I am not getting anywhere.  I can create a new SQL Server database, but can't find any of my existing .dbo connections and can't open any of the .mdf's from within Server Explorer (VS2010).  Any ideas? BTW the install went fine. And I have User Instance set to True in VS2010.

Installing 2008 express after VS2010 pro

  
I have just installed Visual Studio 2010 Professional on my laptop and it installed a basic version of SQL Server 2008 Express with no management tools. I would like to install the Full SQL Server 2008 Express on my laptop, but when I download and run SQLEXPRADV_x86_ENU.exe (advanced version with tools) or even just 2008SQLManagementStudio_x86_ENU.exe (management studio only), it extracts the files, runs a command prompt window for about 2 seconds and then closes and deletes the files it just extracted. I am installing on a laptop with Windows XP Pro SP3. Any help would be greatly appreciated. Thank you!j

SQLServer Express 2008 R2 - Cannot connect Error: 18456, Severity: 14, State: 11.

  
I have just installed  running MSSQL Server 2008 R2 (Express), along with Visual Web Developer 2010 Express In SQL Server Configuration Manager I can see the SQL Server Service running (SQLEXPRESS) and the SQL Server Browser service running. On running SQL Server Management Studio when trying to log on I get the message Login failed for user Phil-PC`Phil (Microsoft SQL Server, Error: 18456) In the SQL Server Error log I see this error 2010-09-16 10:24:16.07 Logon       Error: 18456, Severity: 14, State: 11. 2010-09-16 10:24:16.07 Logon       Login failed for user 'Phil-PC\Phil'. Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors. [CLIENT: <local machine>] I have been unable to find anything useful on Google on how to resolve this problem. I have tried running the command line utility sqlcmd -L and this lists the following Servers:     Phil-PC     Phil-PC\SQLEXPRESS   In my list of Installed programs in Control Panel I see both MS SQL Server 2008 & MS SQL Server 2008 R2, is that correct?

SqlServer 2008 Express Install error

  

Guys, any one know how to fix this ?

I installed the SqlServer Express 2008 on top of WinXp sp2 with .net framework and sdk 3.5

Now when I try to start the sqlexpress service it does not start and event log has following exception..


FileMgr:Tongue TiedtartLogFiles: Operating system error 2(The system cannot find the file specified.) occurred while creating or opening file 'e:\sql10_main_t\sql\mkmastr\databases\objfre\i386\modellog.ldf'. Diagnose and correct the operating system error, and retry the operation.

Now on my system I have only c:\ drive no e:\

Does any one know how to fix this ?
Is there a way to create this master database somehow using command line?

I really don't want to uninstall/install ?

SQL Server Express 2008 R2 and VS2010

  

Is anyone using this combination together?

I ask because I have posted previous questions without reply.  There seems to be a compatibility issue with the database in VS once opened up in R2 - any got any experience of this and how to work round it?

Thanks


John



How to connect a remote Sqlserver 2008 r2 server with IP address and port? I use SMO and VS2010.

  

how to write SMO's conn.ConnectionString with IP address and port?


What is the proper way to set permissions in sqlserver 2008 (express)?

  

I have a database that is accessed by an application for data updates.

I want to use windows authentication with a domain group

I have created a login with the domain group then created a user in the appropriate database with that login

I have created a database role with select,update,delete,insert rights on the appropriate tables.

The application works fine with a separate user that has a login and user with the required permissions but when a member of the domain group runs the app they can connect to sqlserver but do not have access to the tables.

In Oracle I would create the role, add table permissions to the role and assign the role to the user,

I can't figure out how to accomplish the same thing in sqlserver 2008

Thanks,

Glen


VS2010 Pro and SQL Server 2008 R2 Express

  

Hi!,

 

I have installed VS2010 Pro Trial (with the intention of buying VS2010 Pro). If I understand well, during the installation, SQL Server 2008 Express was also installed. I wonder if there are any clear instructions somewhere of how to upgrade from the (existing) SQL Server 2008 Express to SQL Server 2008 R2 Express edition. I have already spent hours researching and I am very confused with the various editions of SQL Server 2008! :( (It took me forever to realize that SQL Server 2008 Express with SP2 is NOT the same as SQL Server 2008 R2 Express since many of the links of the R2 site forward one to 2008 pages!!! :( )

And a side question... Is there a way (that I obviously haven't figured out yet!) to manage SQL Server Express (2008 plain or 2008 R2) from OUTSIDE VS? (I'm an old programmer from the VS6/MSDE era :P )

Thanks for your patience and any responses!


is it possible to upgrade a license of sqlserver 2008 express that has expired that was a temporary

  
I installed a copy of sqlserver express 2008 sp2 that was an evaluation copy that its lic has expired...is there a way to put in a new lic key from a new msdn license without having to re-install a fresh copy of 2008 from my new MSDN downloads? or am I stuck in installing a new copy?

SQLSERVER Express 2008 R2 unattended install issue

  

My question is as follows:

I need to instal SQL Server Express 2008 R2 in command prompt mode (unattended).

I was able to create a configuration file and i've tested this instal and it does work, installing the correct instance and everything.

However, in about 30 to 40 percent of the computers that i run this install, the unattended installation goes through it's motions and finishes, but when i go check the installed programs the only thing installed is the SQL SERVER Installation Center <month> CTP. Nothing else is installed like the Configuration manager or the required instance. Has anybody else seen this? I'm trying to isolate the condition that creates this. It only happens on a percentage of the computers.

I'm offering below the contents of my Configuration file.

;SQLSERVER2008 Configuration File
[SQLSERVER2008]

; Specify the Instance ID for the SQL Server features you have specified. SQL Server directory structure, registry structure, and service names will reflect the instance ID of the SQL Server instance.

INSTANCEID="SQLXD1"

; Specifies a Setup work flow, like INSTALL, UNINSTALL, or UPGRADE. This is a required parameter.

ACTION="Install"

;accepting license agreement

IACCEPTSQLSERVERLICENSETERMS="True"

; Specifies features to insta

Backup and Restore SQL Express 2008 database

  

Hi All,

How can backup and restore SQL Express 2008 database using c#.net

Thank you


Vineeth

Installing SqlServer 2008 Express as prerequisite

  

When I installed the Sql Server 2008 Express on Windows 7 as a prerequisite to my application, I got this error

The following properties have been set:
Property: [AdminUser] = true {boolean}
Property: [ProcessorArchitecture] = AMD64 {string}
Property: [VersionNT] = 6.0.0 {version}
Running checks for package 'Windows Installer 3.1', phase BuildList
The following properties have been set for package 'Windows Installer 3.1':
Running checks for command 'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe'
Result of running operator 'VersionGreaterThanOrEqualTo' on property 'VersionMsi' and value '3.1': true
Result of checks for command 'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe' is 'Bypass'
'Windows Installer 3.1' RunCheck result: No Install Needed
Running checks for package '.NET Framework 3.5 SP1', phase BuildList
Reading value 'SP' of registry key 'HKLM\Software\Microsoft\NET Framework Setup\NDP\v3.5'
Read integer value 1
Setting value '1 {int}' for property 'DotNet35SP'
The following properties have been set for package '.NET Framework 3.5 SP1':
Property: [DotNet35SP] = 1 {int}
Running checks for command 'DotNetFX35SP1\dotNetFx35setup.exe'
Result of running operator 'ValueGreaterThanEqualTo' on property 'DotNet35SP' and valu

SMO.Backup Problem with Remote Server on Network [SQL Server 2008, VS2010]

  

Hi,

The Below codes working fine while I create backup on SQL Server installed on same system. But When I try to take backup on Network, the backup says failure.

Really i can't understand. Just i changed the IP & I tried, but I get failure reply.

For that Any Ideas will be welcome.

 MyDTBaseName = "Supplier_Accounts"
    MyBckPth = "\\Unc_Path\Year_End_2010"
    PurDbName = MyBckPth + "\Sup_SQLSMO.bak"
    Dim MyServIp As String = "122.268.2.40, 2745"
    Dim MyRemot_ServIp As String = "122.268.2.50, 2745"
    Dim MyBackup As Microsoft.SqlServer.Management.Smo.Backup = New Microsoft.SqlServer.Management.Smo.Backup
    Dim MyServer As Microsoft.SqlServer.Management.Smo.Server = New Microsoft.SqlServer.Management.Smo.Server
    'Dim MyServer As Microsoft.SqlServer.Management.Smo.Server = New Microsoft.SqlServer.Management.Smo.Server("122.268.2.40,2745")
    MyServer.ConnectionContext.ServerInstance = MyServIp
    MyServer.ConnectionContext.LoginSecure = False
    MyServer.ConnectionContext.Login = "sa"
    MyServer.ConnectionContext.Password = "123"
    MyServer.ConnectionContext.Connect()
    MyBackup.Action = BackupActionType.Database
    MyBackup.Database = "Supplier_Accounts"
    MyBackup.Devices.Add(New BackupDeviceItem(PurDbName, DeviceType.Fi

Convert 2005 RDLC to 2008 using VS2010

  

Hi and thanks.

 

I'm getting an error on serveral reports that I built  in VWD2005 (express) using the reportviewer control.  Trying to edit the rdlc file in VS2010, VS2010 asks if i want to convert the file to RDLC 2008 format and I click ok.  When I build the site, I get this error (and of course also when the report is ran):

 

Error 1 The report definition is not valid.  Details: The report definition has an invalid target namespace 'http://schemas.microsoft.com/sqlserver/reporting/2008/01/reportdefinition' which cannot be upgraded. C:\inetpub\wwwroot\mastercardlcm\Reports\WorkLists\OpenSRStatus.rdlc 1 

 

Here is my web.config concerning the RDLC assemblies, etc.

		<httpHandlers>
			<add path="Reserved.ReportViewerWebControl.axd" verb="*" type="Microsoft.Reporting.WebForms.HttpHandler, Microsoft.ReportViewer.WebForms, Version=8.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" validate="false"/>
		</httpHandlers>
		<compilation debug="true">
			<assemblies>
				<add assembly="Microsoft.ReportViewer.WebForms, Version=8.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/>
				<add assembly="Microsof

VS2010 Express ASP.net and database file with SQL Authentication

  

Hi,

I have installed Visual Studio 2010 Express in my local system.

Steps
1. File->New Website
2.Open datbase explorer, right click on dataconnection
3.Select Create new connection
4.use Microsoft SQL Server Database file
5. Type new databse filename
6. Now i want to use SQL authentication which is not working
7.If we use windows authentication its wokring without any problem
8.But i need sql authentication to be used.
9.I have not installed SQL studio. I am only using the one which is packaged in VisualStudio 2010 SQLClient.

Let me know how can we create a new database file with userID and password. So that i can host it in other systems as well without any windows authentication.

Thanks and regards
Mahesh kotekar
http://mahesh.kotekar.com  


VS2010 Express ASP.net and database file with SQL Authentication - How to create database file with

  

Hi, I have installed Visual Studio 2010 Express in my local system.

Steps 1. File->New Website

 2.Open datbase explorer, right click on dataconnection

 3.Select Create new connection

 4.use Microsoft SQL Server Database file

5. Type new databse filename

6. Now i want to use SQL authentication which is not working

 7.If we use windows authentication its wokring without any problem

8.But i need sql authentication to be used.

 9.I have not installed SQL studio.

 I am only using the one which is packaged in VisualStudio 2010 SQLClient. Let me know how can we create a new database file with userID and password. So that i can host it in other systems as well without any windows authentication.  I know that VS2010 setup also installs the SQL client which is requiredto create and manage sql databse files/quries etc

 

i dont know the default userID and password for SQLauthentication. As the express setup did not asked any credentials while installing SQL components

 

Thanks and regards

 Mahesh kotekar

http://mahesh.kotekar.com


Categories: 
ASP.NetWindows Application  .NET Framework  C#  VB.Net  ADO.Net  
Sql Server  SharePoint  Silverlight  Others  All   

Hall of Fame    Twitter   Terms of Service    Privacy Policy    Contact Us    Archives   Tell A Friend