.NET Tutorials, Forums, Interview Questions And Answers
Welcome :Guest
Sign In
Win Surprise Gifts!!!

Top 5 Contributors of the Month
Gaurav Pal
Post New Web Links

Windows Server 2008 32 and 64bit and Active Directory

Posted By:      Posted Date: October 14, 2010    Points: 0   Category :SharePoint

By any chance do you if it is recommended to have Sharepoint 2010 and
Active Directory on the same windows 2008 server? Or they have to be on separate servers?

Also, do you know if Windows 2008 32 bit have any conflict communicating
with Windows server 2008 64bit?




View Complete Post

More Related Resource Links

Error while trying to register DLLs for Microsoft Jet on Windows Server 2008 R2 64bit

Hello! I'm having issues with importing Excel spreadsheets into Microsoft SQL Server 2005 on a Windows Server 2008 R2 64bit server.  After browsing the web, it appears that the problem is with the DLL's used by Microsoft Jet.  I've thus attempted to re-register these DLL's.  However, I am receiving the following results. c:\Windows\SysWOW64> regsvr32 c:\Windows\SysWOW64\msjetoledb40.dllSuccessful c:\Windows\SysWOW64> regsvr32 c:\Windows\SysWOW64\msjet40.dllSuccessful c:\Windows\SysWOW64> regsvr32 c:\Windows\SysWOW64\msjint40.dllThe module "msjint40.dll" was loaded but the entry-point DLLRegisterServer was not found c:\Windows\SysWOW64> regsvr32 c:\Windows\SysWOW64\msjter40.dllThe module "msjter40.dll" was loaded but the entry-point DLLRegisterServer was not found c:\Windows\SysWOW64> regsvr32 c:\Windows\SysWOW64\msjtes40.dllSuccessful c:\Windows\SysWOW64> regsvr32 c:\Windows\SysWOW64\mswstr10.dllThe module "mswstr10.dll" was loaded but the entry-point DLLRegisterServer was not found I've set the application pool for this site to use 32bit.  Please note that due to my role on the team, other options such as using ACE are not available to me, unless I can prove that I've exhausted all other options. Thoughts? Thanks,Mike

Help deploying Windows Service to 64bit Server usinf Visual Studio 2008 Setup Project?

I have a Windows Service I created a while back for our Win2003/2008 32bit Servers, written in Visual Studio 2008, deployed via a VS2k8 Setup Project.  Everything works great, installs fine, and runs as it should.  There is no platform dependent code, it's all straight-up .Net Framework stuff, so we thought it should deploy to a Win2008 64bit Server just fine.  But this seems not to be the case.

When I try to install the Service as is on the 64bit machine, the service and associated DLL's are installed to the "C:\Windows\SysWOW64" folder, but when you right click the Service itself and look at the properties, it is trying to find the .exe file in the "C:\Windows\System32" folder. This difference prevents the service from running, obviously.

If I change the Setup Project settings, set the Target Platform to "x64" and change in the File System screen to use the "System (64-bit) Folder" placing the files in there and re-run the setup.exe on the server.... now the files are correctly installed to the "C:\Windows\System32" folder, but the Service itself is not 'installed', that is it *does not* show up in the Services Manager.

Just for the giggles of it I tried to manually install the service using 'installutil.exe' in the .Net Fra

Sql Server 2008 (64bit) on Windows Server 2008 with a connection to Oracle 10g (64bit)



I know there are similar questions posed but none that provided a solution to my particular problem.

I am upgrading a SSIS package from Sql Server 2005 (32bit) to Sql Server 2008 (64bit) on Windows Server 2008 R2. It worked on the Sql Server 2005 machine. This package connects to an Oracle 10g (64bit) database.

The Oracle 11g client and networking tools are installed (by the Oracle DBA). I tested my connection on the sql server 2008 machine using SqlPlus and doing a tnsping. I can also create a Windows ODBC datasource connection to the Oracle 10g database.

The package executes properly on my local computer XP (32bit) running bids 2008.

The package fails on the server in SSIS. I need to be able to schedule the package in a job so it must run in SSIS.

I have also tired to create a connection manager to the Windows ODBC oracle connection without success. It is blank and does not allow me to select or refresh to view the Windows ODBC datasources.

Any assistance would be greatly appreciated. I have seen other forums where installing the Oracle 11g ODAC and Oracle Developer Tools for Visual Studio might assist in creating the package. But I need assistance in running the package from SSIS and not BIDS.






MOSS2007 (64Bit), Windows Server 2008 (64Bit) & Crystal Reports 2008


Hi guys,

at the moment i stuck at the following problem:
I try to call a Crystal Report (designed with Crystal Reports 2008 SP3) from my SharePoint aspx-page. In my 32-Bit Development-Eviroment everything works fine, but now i'm trying to deploy the solution to a MOSS207 64-Bit enviroment (Windows Server 2008 64Bit, IIS7, MOSS 64Bit).

When i try to call the report i get the following error message:
Exception Details: CrystalDecisions.CrystalReports.Engine.LoadSaveReportException: An error has occurred while attempting to load the Crystal Reports runtime. Either the Crystal Reports registry key permissions are insufficient, or the Crystal Reports runtime is not installed correctly. Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://www.businessobjects.com/support for more information.

I've asked SAP for a solution of this problem and got back two possible ways to solve this problem:
1. Compile the application in 32-Bit mode -> this does not work with SharePoint (Error: Can't find assambly)
2. Run the Web Application in 32-Bit mode -> this does nit work with SharePoint (In

SQL Server 2008 R2 Side by Side installation in Cluster(Active/passive on Windows 2003 SP2).


Hi all,

I came again with couple question on SQL Server 2008 R2 side by side installation in Cluster(Active/passive on Windows 2003 SP2).

1.I have already have SQL Server 2000 SP4 Installation.
2.Can I start Installation(Side by Side) from Passive node ?

3.you want me give New SQL Server Netwrok name (Instance Configuration  Screen)?.

4.you want me give New Instance ID  name (Instance Configuration  Screen)?

5.Can I chose Excixting Clustore resource group or I need to Create New group which is the best ?


Thanks in advance


SQL Server 2005 on Windows 2008 R1/R2 64bit



Please advise where can I find the product compatibility matrix for SQL Server? I need to know if SQL Server 2005 (64bit) is certifed on Windows server 2008 R1/R2 (64 bit).



How to Import Excel Data into SQL Server 2008(64 bit) Using SQL Query (in Windows Server 2008 64bit

I am developing VB .Net application in Visual Studio 2008(64bit), SQL Server 2008(64bit) and Windows Server 2008(64bit) environment.

I need to import an Excel and Flat files data into SQL Server database using SQL Query. I tried a lot with the following SQL Queries directly with SQL Server Management Studio,

1. SELECT * INTO  dbo.ExcelImportTest FROM OPENROWSET('Microsoft.Jet.OLEDB.4.0','Excel 8.0;Database=D:\PTPLDCT\DCT Test Datasource\DCT_Excel_Test_Sample_1.xls',
'select * from [Sheet1$]')

While executing i got an error as below,

Msg 7403, Level 16, State 1, Line 1
The OLE DB provider "Microsoft.Jet.OLEDB.4.0" has not been registered.

2. I have also tried with MSDASQL provider,

Select * from openrowset('MSDASQL','Driver={Microsoft Excel Driver (*.xls)};
Dbq=DCT_Excel_Test_Sample_1.xls;DefaultDir=D:\PTPLDCT\DCT Test Datasource\', 'Select * from [Sheet1$]')

Then i encountered the following error,

OLE DB provider "MSDASQL" for linked server "(null)" returned message "[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified".
Msg 7303, Level 16, State 1, Line 1
Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "(null)".

3. Finally i have tried the Query with Linked Server,

EXEC sp_addlinkedserver @server = '

Word Automation Issue in Windows Server 2008 Hosting



The problem I am posting here is that I was facing nearly 2 weeks around. Any body comes with this stuff please help.

Word Automation in sample ASP.NET(C#) application.

I am using Microsoft.Office.Inetrop.Word Assembly for automation. Here I am reading a XXX.dot template file and fill the contents with dynamic data.

When i am executing my code in localhost:someportnumber the automation is working fine and I could get expected result and when I am hosting in my inetmgr(Windows XP is my OS) it is also working fine.

But the problem is that when I am hosting in my production server(Windows Server 2008 Standard Edition) I am not able to perform automation and results in the following error.

Data: System.Collections.ListDictionaryInternal
Message: Word has encountered a problem.
Source: Microsoft Word

The code gets failed in the following line:

ApplicationClass wordApp = new Microsoft.Office.Interop.Word.ApplicationClass();

Document wordDoc = wordApp.Documents.Add(ref oTemplate, ref oFalse, ref oMissing, ref oMissing); // Error in this line

I cannot able to proceed further. Can anybody please help me in solving this issue?

Thank you.

With Regards,


No ASPNET User in Windows Server 2008?


I have been looking everywhere online regarding this, but have not found a clear answer.


I have an ASP.Net app running on Windows Server 2008, it's basically a reporting app using Crystal Reports. I have encountered a roadblock in regards to rendering some pages. When I run the app in Visual Studio(on the same 2008 machine) everything works perfectly. Yet when I publish it and run it live the reports will not display correctly, I get a message saying Failed to render page.


I looked this error up in the Crystal Reports website and the fixes they have there refer to giving the windows "aspnet" user full access rights to certain folders on the machine. I would be happy to do this, however there is no aspnet user in Windows Server 2008.


I installed the server and set its role to be Web Server. I also checked all the options regarding ASP.Net and IIS 6 compatibility. Yet there is no ASPNET username anywhere.


Did I set the server up wrong? or do I have to do something within ASP.Net to  create this user and then give it rights? 

Not working on Windows Server 2008




I had the CSS friendly adapters working great on our old server (windows server 2003 - 32bit) and now we have moved to a 64 bit environment and now I can not get the CSS friendly adapters to work.

We are using SharePoint 2007.

Is there another work thru for 64bit environment.

I notice windows server 2008 has a directory  C:\Windows\Microsoft.NET\Framework64 would I be using the browser file in this directory???

Please help!

How can Install Office 2007 on Windows server 2008 R2 64 bit machine in WSS 3.0

I have  64 bit machine  and Windows server 2008 R2 has installed. i have successfully install WSS 3.0  , but  when i tried to install  office 2007 ,  one  error  has  come  "OS is not compatible "  i thought  it was asking  for 64 bit office  2007   and i go through the  google and R&d find no 64 bit office is available ,  i have used   excel .dll in my custom code  so my problem is that   how can  install office 2007  on 64 bot OS 2008 r2  machine .  if anyone can help   me  , please let me know . thanks in advance

VS Studio WorkFlow Failed on Start in MOSS 2007 ON Windows Server 2008 64 Bit


I have created a sequential sharepoint workflow in WSP Builder in my Sharepoint Server and Deployed it.

But the workflows says Failed on start and retrying ans stops there forever says couldn't start the workflow.

I repaired .NET Framework 3.5sp1 installed

 tried this

 1. I tried again, in C Prompt:  Lodctr "c:\Windows\Microsoft.Net\Framework\v3.0\Windows Workflow Foundation\perfcounters.ini"  it says initiation file cannot be found

2   i again tried this C prompt Lodctr /R "c:\Windows\Microsoft.Net\Framework\v3.0\Windows Workflow Foundation\perfcounters.ini"

it says reloaded  from the system restored

i am still getting the same error.

When i manually go to my  C:\Windows\Microsoft.NET\Framework\v3.0\Windows Workflow Foundation i can see a folder for SQL that's it nothing more than that..

I dont know what is happening i am trying it from 2 days and still no solution.

any ideas would be real great help for me.

My system is 64 bit , Window server 2008, MOSS SP2, Visual Studio 2008 Version 9.0.30729.

.Net Framework 3.5 sp1

and WSP builder the one from Codeplex for 64 bit machines

MS Word Component Not Getting Created on Windows 2008 64 bit Web Server Edition When I Try Using ASP

Hi All, This might look like a similar question to a lot of you considering there are a lot of web activity happening in terms of blogs/forums/suggestions that I have seen with reference to changes that one needs to do in COM+ Services to enable their ASP.NET Web Application to be able to create Word Objects & I have actually used them personally & they worked for me on Windows 2003 32 bit/64 bit servers. The issue started some 1 month back when I was told that we are upgrading our server to Windows 2008 Web Server edition 64 bit ‘cause of some real benefits it offers if used only as a web server. This was just great as we tested a lot of features /functionality that we were using on our existing server & everything seems to be working just fine on this product by Microsoft. However we also have one web module which is responsible for opening up a MS Word 2007 template file at runtime and fill it with data & is then converted into a PDF document. A lot of ideas on Web suggested that we should move onto Open XML standards to generate documents at runtime, which I have been able to do with no issues. But one activity which still requires me to create a Word document is when I have to convert/SaveAs the Word (docx) document into PDF. I tried all the COM+ & registry related changes that I did on my Windows 2003 64 bit server, but nothing seems

Remote access to SQL-Server 2008 R2 on Windows Server 2008 denied

Hello, after successful installation of SQLServer 2008 R2 and providing my account as a 'sysadmin' I failed to access the server from a management studio of a SQL-Server 2005 release installation. The TCP/IP access is enabled and the server is configured to allow access from remote connections.  The error message reads a follows: ' A network-related or instance-specific error occured while establishing a connection to SQL Server. The server was not found or was not accessible. Verify ... (Provider: Named Pipes Provider, error 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error:2)' Accessing the SQL-Server by the management studio from the local host works fine but trying to acces by command line using the '-E' parameter fails. Is there any additional configuration on the operation system level needed to open a SQL-Server 2008 instance to be selected by other members of  domain groups from the non-local host? Thank you for the answer  

SQL Server 2008 Installation issue in Windows 7 64 bit

I'm trying to install SQL 2008, but an error message keeps appearing: Microsoft .NET Framework 3.5 installation has failed. SQL Server 2008 Setup requires .NET Framework 3.5 to be installed.   My OS is Windows 7 Ultimate 64 bits, so already has de .NET Framework 3.5, I turned on/off a lot of times and the same error occurs! I download the .NET Framework 3.5 and .NET Framework 3.5 SP1 from the links: (http://www.microsoft.com/downloads/details.aspx?FamilyId=333325fd-ae52-4e35-b531-508d977d32a6&displaylang=en http://www.microsoft.com/downloads/details.aspx?familyid=AB99342F-5D1A-413D-8319-81DA479AB0D7&displaylang=en) But, when installing the Framework 3.5 or the SP1, I get the message: "Use turn on or off disable features in Windows control panel".   Someone can help me?! - Windows 7 Ultimate 64 bits - SQL Server 2008 Developer (x86, x64, ia64).   Thanks! Marcelo.

SQL express 2008 r2 on windows server 2003

install ends with the following error : "MsiEnumRelatedProducts failed to enumerate products with UpgradeCode='{1B117BA7-5BC1-419E-820E-7D4F3F412C7B}'. Error code: 1610."

SQL Server 2008 R2 fails after Windows XP Pro SP3 install

We recently encountered an issue with SQL Server 2008 R2 failing to run after the upgrade from Windows XP Pro SP2 to SP3. This was tested and reproduced (with varying results) on more than one computer. Steps to reproduce this. On a Windows XP Pro machine with Service Pack 2 installed, install SQL Server 2008 R2. Next upgrade Windows to Service Pack 3. Now upon opening SSMS or trying to start the SQL server service you receive the following message: "This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem". In some instances reinstalling/repairing SQL Server 2008 R2 does fix the issue.  In other cases the installer crashes and you need to use msizap to clean it up before you can reinstall.  In other cases you do not receive any errors at all. After testing in multiple virtual machines it looks like the cleaner the Windows install the more likely you are to run into this issue.  On machines with most or all windows updates (prior to SP3) installed you do not necessarily even get the failure.  On machines with just Windows XP Pro SP2 installed with no additional updates you get the failure every time. Obviously the SQL Server 2008 R2 prerequisites are installed in all cases in order to be able to install SQL server to begin with. Any help with this would be appre
ASP.NetWindows Application  .NET Framework  C#  VB.Net  ADO.Net  
Sql Server  SharePoint  Silverlight  Others  All   

Hall of Fame    Twitter   Terms of Service    Privacy Policy    Contact Us    Archives   Tell A Friend