.NET Tutorials, Forums, Interview Questions And Answers
Welcome :Guest
Sign In
Register
 
Win Surprise Gifts!!!
Congratulations!!!


Top 5 Contributors of the Month
Kaviya Balasubramanian
Sgraph Infotech
Imran Ghani
Post New Web Links

Load Balancing WSS WFEs (2007)

Posted By:      Posted Date: October 13, 2010    Points: 0   Category :SharePoint
 
I have a CentralAdminServer which hosts an application, which users use and can navigate to at http://server/site.  I added an application server to the farm to support the application; users cannot browse to this because it is purely an application server.  I want to add a WFE on http://server2 so that users can browse to the application as http://server2/site.  Instead of using AAM, I want to use a load balancer.

If I add a WFE to this configuration (as stated previously), can I simply add http://server/site and http://server2/site to the load balancer?  And then add the Load Balanced URL to the application settings in central admin?

I shouldnt have to set AAM, right?  The load balancer will determine where the requests go and then the application will determine which app server to use, correct?

Thanks!


View Complete Post


More Related Resource Links

SharePoint 2007 feature deployment in a load balancing environment

  

I'm looking for information to know how to deploy a Sharepoint 2007 solution (via WSP) in a load balancing environment.  Is it possible to isolate one server at a time.


Daniel Siconnelli There is neither good nor evil... only mogwais and gremlins

Load balancing and Custom Filters in WCF 4.0 Routing Services

  
Hi, Couild someone please guide me to various ways of achieving load balancing using Router Service. i tried seeing few Blogs and tried to understand the round robin concept and the custom filters conceptr. but i m not able to see any specific site which would guide me on various examples of custom filters .And round robin seems a bit complex. http://blogs.msdn.com/b/routingrules/archive/2010/04/14/load-balancing-at-the-routing-service.aspx The above link gave me some insight  . is there any othe way of achieving load balancing other than Round robin. I did go through the samples of Routing services in WCf training Kit Thanks

Word 2010 crashes everytime I try to load a doc from SharePoint 2007.

  
Every time I try to load a doc from our sharepoint site, Word stops working and crashes.  I have repaired Office from Programs and Features, I have renamed the WWLIB.DLL as bad and then repairec again (It came back) and I can not find a dupolicate version of the owssupp.dll file.  In fact the only file in the Office 11 is the UCSribe.dll and it is not duplicated in the Office 14 folder.  The Event viewer gives this error Faulting application name: WINWORD.EXE, version: 14.0.4734.1000, time stamp: 0x4b58fb0e Faulting module name: wwlib.dll, version: 14.0.4734.1000, time stamp: 0x4b58fba1 Exception code: 0xc0000005 Fault offset: 0x00612406 Faulting process id: 0xc98 Faulting application start time: 0x01cb5110726d8727 Faulting application path: C:\Program Files (x86)\Microsoft Office\Office14\WINWORD.EXE Faulting module path: C:\Program Files (x86)\Microsoft Office\Office14\wwlib.dll Report Id: b4600a6b-bd03-11df-988f-463500000031   Does anybody have a solution for me? THis is a very fresh install (<6 months old). 

Load Balancing/Load Sharing features in SQL Server 2005/2008

  
Is there any load balancing features in SQL Server? My understanding is that SQL Server Clustering is not a load balancing feature.  Other features seem to be more like load sharing features: Degrees of Parallelism Table Partitioning Resource Governor seems to be more like a resource allocation feature.          

Word 2010 crashes everytime I try to load a doc from SharePoint 2007.

  
Every time I try to load a doc from our sharepoint site, Word stops working and crashes.  I have repaired Office from Programs and Features, I have renamed the WWLIB.DLL as bad and then repairec again (It came back) and I can not find a dupolicate version of the owssupp.dll file.  In fact the only file in the Office 11 is the UCSribe.dll and it is not duplicated in the Office 14 folder.  The Event viewer gives this error Faulting application name: WINWORD.EXE, version: 14.0.4734.1000, time stamp: 0x4b58fb0e Faulting module name: wwlib.dll, version: 14.0.4734.1000, time stamp: 0x4b58fba1 Exception code: 0xc0000005 Fault offset: 0x00612406 Faulting process id: 0xc98 Faulting application start time: 0x01cb5110726d8727 Faulting application path: C:\Program Files (x86)\Microsoft Office\Office14\WINWORD.EXE Faulting module path: C:\Program Files (x86)\Microsoft Office\Office14\wwlib.dll Report Id: b4600a6b-bd03-11df-988f-463500000031   Does anybody have a solution for me? THis is a very fresh install (<6 months old). 

Load balancing using web service

  
Hi Friends                 Presently we are developing a windows product using dot net, combined with sas (another language). If sas not get installed in local machines then we are in need of using server machine which has sas with it, we are using socket programming to communicate with server machine, Problem is when more number of requests comes to the server for processing sas it is becoming slow, so we need  Load balancing If we go with web service which is having same domain name but different ip address mapped using Domain Name System (DNS) We will get work done faster     What i want is will this work fine, what else i have to done for achieving this, how can i test itWaitingBalaji Manoharan  

Is network load balancing improved for TCP remoting in .Net 2.0 ?

  
Hi

The MSDN TV broadcast for improvements in .Net remoting 2.0 says that the Socket Cache for TCP has been improved to allow for better load balancing.

I cant find any other information about this.

Does this mean that Network Load Balancing is now viable for .Net Remoting 2.0 using the TCP channel ? ( some previous posts say that NLB does not work ideally with older .Net remoting TCP connections )

Thanks

NLB - Strange Time out issue with 2 WFEs MOSS 2007 ?

  

Hi, 

 I am having a MOSS 2007 environment with the follo.

     

Having  Two front end servers – each individual  Hyper-V  and   1 Index Server.

These WFEs  are Virtual Servers with Windows 2008 64 bit OS.

I configured the Windows Load balancing.

What are Best practice for setting up databases in a distributed load balancing environment

  

Hi,

What is the best practice out of the following in a distributed load balancing environment:

keep application database and persistent/tracking database seperate

Keep application , persistence , tracking data all in one database.

Thanks,

Suchi


Setting up a hardware load balancer between WFEs and App servers in SharePoint 2010

  

I am looking for any information I can find about setting up a hardware load balancer between WFEs and App servers in SharePoint 2010.

While the load balancing procedure is simple for WFEs since you just set up DNS to point to network load balancer (NLB) and NLB can be configured to load balance between the WFEs, NLB in this case is sitting outside the farm. How will you insert NLB inside the farm?

I know Application Servers can load balance on their own (WFEs can direct traffic to multiple App Servers) but I want to configure a hardware load balancer nonetheless. I have seen architecture diagrams on TechNet which show NLBs between App and WFEs but no guidance on how it will be configured. Since the app servers will be registered as part of the farm (Configuration DB), how do I tell WFEs to direct traffic to NLB rather than to the App servers directly.

thanks


Load balancing on SQL 2005 Standard ?

  

SQL 2005 Standard.

Hi I would like to find the best approach to load balancing some SQL 2005 Servers taking in mind also the future scaling out of tens or hundreds servers.

I found this article: http://goo.gl/zP1R that writes about P2P replication, Table partitioning and Database mirroring but:

- P2P replication is limited to 12 servers
- table partitioning is not related to our case
- From what I know Database mirroring is only a high-availability solution, isn't it ?

What do you think ? Which is the best solution ?

Is SQL 2008 better in this area ? Could I upgrade to better meet these points ?

Thanks!


WCF Service configuration in Web Farm and Load Balancing envrionment.

  

I want to configure ASP.NET Website Project using WCF Service[NetTcp] (both in c#) for web-farm (for website) and NLB Load balancing (for service). I would like to configure following options for same.

NetTcpBinding.maxConcurrentCalls, NetTcpBinding.ListenBacklog and NetTcpBinding.MaxConnections

Note: During single machine configuration when I changed value of NetTcpBinding.ListenBacklog and NetTcpBinding.MaxConnections in WCF Service project to more that 10, which is default value. I got exception. When I changed this value in Website it was working fine. Due to this I had to keep in default configuration. Not sure why this is the case. If anyone could explain this it would be helpful.

Following reference gives idea how to configure in given environment but does not tell how to go about it.

Ref: http://msdn.microsoft.com/en-us/library/ee377061%28BTS.10%29.aspx


Let me simplify a bit. Lets say I have following configuration.

  • 2 IIS servers in Web Farm.
  • 3 WCF Service Servers (NetTcp) in NLB
  • Default config. for single instance.
    • NetTcpBinding.ListenBacklog: 10
    • NetTcpBinding.MaxConnections: 10
    • NetTcpBinding.maxConcurrentCalls: 16


NLB - Strange Time out issue with 2 WFEs MOSS 2007 ?

  

Hi,


 I am having a MOSS 2007 environment with the follo.

     

Having  Two front end servers – each individual  Hyper-V  and   1 Index Server.

These WFEs  are Virtual Servers with Windows 2008 64 bit OS.

I configured the Windows Load balancing.

In these 2 WFEs Two sites are deployed (One is Team site and One Publishing site) both are intranet sites.

 

Now the issue I am facing here is:

 

Assume that Tower1 and Tower2 are 2 different locations.

 We have a VLAN setup  Web sites are working in same VLAN[say Tower1] where Servers are set up without any issue.

But Web sites are giving Time out issue when it is accessed from different location VLAN [Tower2], after some clicks or web site navigations and website will be up after few minutes.

But the site  is working in different VLAN within in same location[Tower1 or Tower2] where server are set up

 

When web site is timing out in different location VLAN [Tower2], web site is timing out in all the locations and we will not able to connect to front end servers remotely. But same time we are able to connect to hyper–V  and from there, able to connect to front end servers, web site is accessible from there without any i

I need complete tutorial about MSSQL 2008 Database mirroring for load balancing

  

I need complete tutorial about MSSQL 2008 Database mirroring for load balancing

i want to load balance my SQL workload

all database insert update and delete queries will be mirrored

all select queries will be load balanced

sql servers will run at windows server 2008r2 at different computers (VPS)


Browser based Pokemon MMORPG Pokemon Craft Developer Used asp.net 4.0 routing at it's Pokedex

SharePoint 2010 Network Load Balancing and Kerberos Authentication

  

Hello all. Thanks for taking a look at this...

To put it simply, kind of, I have a SharePoint 2010 farm with 1 web application (non default port) using kerberos authentication with 2 load balanced web front end servers.

Example:
web01.domain.com:8090
web02.domain.com:8090
NLB = web.domain.com

The NLB is setup at web.domain.com (on port 80), as mentioned above, and directs traffic to either web server on port 8090.

Notes:
An SPN has been setup for the NLB url with the web applications service account.
Delegation has been setup on the web app account and the web servers.
I am not using host headers for this web app.
I have setup the useapppoolcredentials instead of disabling kernel mode in IIS7 (tried it with it disabled too)

I tried this just in case...Registered SPNs for both web servers, with and without port numbers, and with and without fqdns.

The Problem
Kerberos authentication will not work when the NLB is set at port 80. If I set the NLB to match the web application port, 8090, kerberos authentication works fine and all is well.

This may be an obvious issue, but i cant put my finger on what I am missing.

Simply put, i would just like to have the users type in web.domain.com (the NLB url) instead of having to put in web.dom

Forecast: Cloudy: Load Balancing Private Endpoints on Worker Roles

  

A client needed to load-balance private service endpoints on Windows Azure Worker Roles without taking on the latency of a queuing operation. I'll walk you through one possible solution to this problem.

Joseph Fultz

MSDN Magazine May 2011


xll compiled using Excel 2010 pia does not load in Excel 2007

  
I am using sharp develop and I compile an xll that uses Microsoft.Office.Interop.Excel. The xll loads fine in Excel 2010, but not in Excel 2007. If I compile the xll using Excel 2007 pia it works in both Excel 2007 and 2010.

Categories: 
ASP.NetWindows Application  .NET Framework  C#  VB.Net  ADO.Net  
Sql Server  SharePoint  Silverlight  Others  All   

Hall of Fame    Twitter   Terms of Service    Privacy Policy    Contact Us    Archives   Tell A Friend