SQL Server 2005 64bit -SP3 rollback process on A/P Cluster Environment

Windows Server 2003 R2 Enterprise Edition SP2 32-bit All updates and patches installed Two-node cluster environment configured. Cluster functions perfectly. Trying to install SQL Server 2005 Enterprise Edition (32-bit) as a clustered application. Installation proceeds fine until it begins to install the SQL Server Database Services product. Status window says "Starting Services. Service: SQL Server Browser". Error message is presented: "Service 'SQL Server Browser' (SQLBrowser) failed to start. Verify that you have sufficient privileges to start system services". SQL Server Service Account is in the Administrators group on both local systems, and is a domain account. Account used for the installation is in the Administrators group on both local systems, and is a domain account. Have cancelled out of the install and rebooted both servers numerous times. Exact same error continues to occur. Cluster is active and all resources are owned by node #1 - the node where SQL Server Installation is being run. In the event viewer, I see: Event ID: 10 Description: The SQLBrowser service was unable to establish SQL instance and connectivity discovery". I am also seeing errors like: Source: SQLBrowser. The SQL configuration for SQL is inaccessible or invalid. Source: SQLBrowser. The Configuration of the AdminConnection\TCP protocol in the SQL instance xxxxxx i

Hi, I have this problem, i have sql server on Cluster with two nodes, the nodes are machine vmware, i was exs 3.5 and in december the esx was upgrade to version 4.  Of January the nodes present this problem:The node lost communication with cluster node 'SVRSQLN02' on network 'Servidores'.The node lost communication with cluster node 'SVRSQLN02' on network 'HeartBeat'.What can i do?

Hi All I have problem with cluster Environment that is there is network failure in Cluster Environment,will it stop SQL Server Instances Event viewrer Information 6:22:09 The MSSQLSERVER service entered the stopped state. 6:22:05 The MSSQLSERVER service was successfully sent a stop control. 6:22:04 The SQLSERVERAGENT service entered the stopped state. 6:21:43 The node lost communication with cluster node 'MSSQL0002' on network 'LAN'. 6:22:02 The SQLSERVERAGENT service was successfully sent a stop control. 6:22:02 Cluster resource 'SQL IP Address1(SQLCLUSTER)' in Resource Group 'SQL' failed. 6:22:02 The TCP/IP interface for Cluster IP Address 'Cluster IP Address' has failed. 6:22:02 The TCP/IP interface for Cluster IP Address 'Cluster IP Address' has failed. 6:22:02 The TCP/IP interface for Cluster IP Address 'MSDTC IP address' has failed. 6:22:02 The TCP/IP interface for Cluster IP Address 'MSDTC IP address' has failed. 6:22:02 The TCP/IP interface for Cluster IP Address 'SQL IP Address1(SQLCLUSTER)' has failed. 6:21:58 The TCP/IP interface for Cluster IP Address 'SQL IP Address1(SQLCLUSTER)' has failed. 6:21:58 Cluster network 'LAN' is operational (up). All available server cluster nodes attached to the network can communicate using it. 6:21:58 The interface for cluster node 'MSSQL0002' on network 'LAN' failed. If the condition persist

We have a sql 2005 cluster on W2K8 cluster. It is a named instance say SRV1\A. Then I built a new W2K8 (with a diff cluster service name) but the same service account. Then I installed a new sql 2005 cluster say SRV2\A. Now when I bring down the sql server resources on SRV1 and try to rename SRV2\A to SRV1\A through the cluster admin, I get the error the network name already exists. I have tried bringing an old cluster and installing a new cluster with the same name and it works. Why am I not able to rename the name? Any advice would very helpful.Paul - SQL DBA

Hi All, I'm fequently experience Cluster failover issue. The cluster tries to failover and it fails back. Because of this the SQL server is getting restarted and this is a bugging issue during business hours. The following are the System event logs, Cluster resource 'SQL Server' in Resource Group 'Production' failed. The SQL Server Agent (MSSQLSERVER) service was successfully sent a stop control. The SQL Server Agent (MSSQLSERVER) service entered the stopped state. The SQL Server (MSSQLSERVER) service was successfully sent a stop control. The SQL Server (MSSQLSERVER) service entered the stopped state. The SQL Server (MSSQLSERVER) service was successfully sent a start control. The SQL Server (MSSQLSERVER) service entered the running state. The Cluster Service brought the Resource Group "Production" online.    The following are the application event logs, The client was unable to reuse a session with SPID 131, which had been reset for connection pooling. This error may have been caused by an earlier operation failing. Check the error logs for failed operations immediately before this error message. [sqsrvres] CheckQueryProcessorAlive: sqlexecdirect failed [sqsrvres] printODBCError: sqlstate = HYT00; native error = 0; message = [Microsoft][SQL Native Client]Query timeout expired [sqsrvres] OnlineThread: QP is not online. The client was unable

Hi,

 

I wish to know how SQL Server 2005 is linked to Windows server 2003 Environment. I have knowledge about oracle databases. But Microsofet products are new to me.

To put it simple purpose of SQL Server 2005 and Windows server 2003. How both are linked ?

 

 

thanks

Is TRUNCATE command can be rollback in SQL Server 2005

I am trying to install SqlServer 2005 on windows 2008 cluster with domain controller. Installation fails on the second node while trying to set registry settings for server network libraries. Attached error message and output from error log. Can somebody suggest any solutions.

Thanks

Ravi

TITLE: Microsoft SQL Server 2005 Setup
------------------------------

Failed to set registry settings for server network libraries. The action is SetDefaults. The error is 11004 (The requested name is valid, but no data of the requested type was found.
)

 

Func Name='LaunchFunction'>
Function=Do_SetServerSSNLDefaults
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='203'>
Doing Action: Do_SetServerSSNLDefaults
PerfTime Start: Do_SetServerSSNLDefaults : Fri Sep 24 17:45:31 2010
<Func Name='Do_SetServerSSNLDefaults'>
Setting server network settings for instance name MSSQLSERVER, instance id MSSQL.1
Failed to set registry settings for server network libraries. The action: SetDefaults Error: 11004
        Error Code: 0x80072afc (11004)
Windows Error Text: The requested name is valid, but no data of the requested type was found.
  Source File Name: sqlca\nlregca.cpp
Compiler Ti

Hi Security Experts ,

Receintly , we had a situation where we were not able to login to SQL Server 2005 x86 on a cluster .The reason was that we had removed Builtin/Admin ....We had to add it back to bring the SQL Server resource up and running ...But due to Audit we cant keep Builtin\Admin and will have to remove it ...Is there a way to have a substitute for this ...I am sure there will be ..

Regards

---

Abhay Chaudhary OCP 9i, MCTS/MCITP (SQL Server 2005, 2008, 2005 BI) ms-abhay.blogspot.com/

when i install sql server 2005 in cluster. I have error at

Setup process screen --> the selected components are being configured.

all the components are failed.

I am using domain account with administrator account privilege on both server

OS : windows server 2008 on virtual machine

 

Note : when i install sql server agent is enable to select during setup..

 

 

cluster

Good Afternoon,

 

I just installed SQL Server 2005 64bit on a fresh system with no other applications loaded on running on the new server.

 

The only other component that was installed with the SS2K5 database services is SSIS. The base installation and the SP2 patch went on perfect.

 

I went looking for the Management Studio thru the Start menu options and it is NOT under the Microsoft SQL Server 2005 group. The only options under the SS2K5 group are "Configuration Tools" and "Docs and Tutorials".

 

Here are file names that I downloaded from the MS website and installed.

 

   SW CD SQL Svr Enterprise Edtn 2005 64Bit X64 English #1 x64 MLF.x11-57796 (which is a zipped)

 

   SQLServer2005SP2-KB921896-x64-ENU

 

There was also another zipped file that I tried to install but it seems to be a duplicate of the zipped file above:

 

SW CD SQL Svr Enterprise Edtn 2005 64Bit X64 English #2 x64 MLF.x11-57797

 

Any help would be greatly appriciated.

 

Thanks ALL!

 

J Kusch

Hi

Please advise where can I find the product compatibility matrix for SQL Server? I need to know if SQL Server 2005 (64bit) is certifed on Windows server 2008 R1/R2 (64 bit).

Thanks

 

Hi,

  I have 4 node Cluster (3 Active 1 passive) my second node SQL Cluster resource is not starting.

 

i'm getting following errors. if anyone can please give me help.

 

Event Type:      Error

Event Source:   MSSQL$TLCSQLDBIN02

Event Category:            (3)

Event ID:          19019

Hot fixes for Windows 2003 SP2 for Installing SQL Server 2008 R2 In Cluster environment