.NET Tutorials, Forums, Interview Questions And Answers
Welcome :Guest
Sign In
Register
 
Win Surprise Gifts!!!
Congratulations!!!


Top 5 Contributors of the Month
MarieAdela
Imran Ghani
Post New Web Links

Getting Unexpected Error while Publishing my Reusable Workflow

Posted By:      Posted Date: October 06, 2010    Points: 0   Category :SharePoint
 

*** UPDATE ***

After waiting for anyone to respond, and needing to figure this out, went into Central Admin and reversed steps (1) & (2) below to bring my system back to the state where the workflow would compile.  That didn't work ... I am still getting the error.  So now I am lost ... what could be causing this problem?  Anyone ??

********************************

I created a reusable workflow over a week ago and it has been working perfectly. Today everytime that I try to publish the workflow I get the following error during the "Validating the workflow" step:

"Errors were found while compiling the workflow... Unexpected Error on the server associating the workflow"

The only thing that has changed between when it worked and when it doesn't is that I configured the Server to enable ability to use the "Show workflow visualization on the status page" setting.  To do this I learned that I had to provision a Secure Store Service, create a Visio App ID and associate it.  So I followed these two sets of instructions:

  1. http://tinyurl.com/39l4jl4
  2. http://tinyurl.com/24w33lg

When I first got this error I did some Googling and found some p


View Complete Post


More Related Resource Links

SharePoint Designer Error - Unexpected error on server associating the workflow

  
I am creating a multistep workflow with multiple Approval steps.  When I get to step 7 or the 7th Approval step and try to publish it, it states that "Errors were found when compiling the workflow.  The workflow files were saved but cannot be run."  With "Unexpected error on server associating the workflow" in the advanced section.  This same error occurs at other stages of the approvals as well.  If I put another process/action in the step, the workflow runs without any problem.  Thanks for the help! JeremyJeremy

Error Publishing Workflow - : Activation could not be completed because the InfoPath Forms Services

  
Recently our when trying to publish a new workflow we are getting the following error: Activation could not be completed because the InfoPath Forms Services support feature is not present. Another symptom is any existing custom workflows are not running. There are several older posts from SharePoint 2007 that indicate to disable and re-enable the SharePoint Server Enterprise Site features. I have tried that and I still get the error.  Looking through the ULS I see the following when I try and publish a workflow: 09/16/2010 15:04:29.48 w3wp.exe (0x2070) 0x0718 SharePoint Foundation General 8e2s Medium Unknown SPRequest error occurred. More information: 0x80070002 c700de1a-5756-4f45-915e-3b229e56f049 09/16/2010 15:04:29.48 w3wp.exe (0x2070) 0x0718 InfoPath Forms Services Conversion and Deployment ey0w Verbose VerifyListPresence: FTL not found on site:http://uchintranet due to expected FileNotFound exception:The system cannot find the file specified. (Exception from HRESULT: 0x80070002) c700de1a-5756-4f45-915e-3b229e56f049 09/16/2010 15:04:29.48 w3wp.exe (0x2070) 0x0718 InfoPath Forms Services Runtime 82mv Exception Activate NonAdminSolution failed with unhandled exception Microsoft.Office.InfoPath.Server.Util.InfoPathLocalizedException: Activation could not be completed because the InfoPath Forms Services support feature is not present.     at Mic

Workflow Infrastructure Error: 88xr Unexpected WinWF Internal Error,terminating workflow Id#03888be1

  

Hello Friends,

I have developed a custom sequential workflow in SharePoint Server 2010 using VS 2010. My workflow gets activated and then creates a new task in the Tasks List.

But "Error Occurred" gets displayed in the Workflow column in the default view of my document library instead of "In Progress".

I debugged my code and there are no errors in it. But I found the below error in \14\LOGS\:

"SharePoint Foundation Workflow Infrastructure Error: 88xr Unexpected WinWF Internal Error,terminating workflow Id#03888be1-28c8-409d-bc65-7115bc17edfa"

I have set the properties correctly for the workflow activities in VS 2010.

Can anybody help me solve this error?

Thanks in advance...


Regards,Gautam Kaikini.

Sharepoint Designer Workflow Unexpected Error

  

Hi,

I am using SPD to design(?) a workflow. I have two workflows of similar kind. One is working fine but the other is not. When the "Check Workflow" button is pressed, it give no error but when "Finish" is pressed it give me

Error were found when compiling the workflow. The workflow files were saved but cannot be run.

Advanced: Unexpected error on server associating the workflow

I have checked the workflow logic and I did not find logical error. I searched and found that i need to see in the web.config, but i did not find web.config file in SPD under by site.

Any ideas?

Thanks for your time,


Tyampoo

Error when publishing new workflow in SP Foundation 2010

  

I get the following error when I try to publish a simple workflow in SP Foundation 2010. New server , fresh Windows 2008 install, fresh SP Foundation install. Try to create a workflow in SP Designer and get error when publishing it:  "Could not publish the workflow because the workflow configuration file contains errors."

I don't see anything in the Windows Logs. Any ideas?


"Type ASP.x is not defined" error for dynamic user control when publishing updateable

  

I have a user control (ContainerCtrl) which programmatically instantiates another user control (SimpleCtrl) in OnLoad. It builds and runs fine, but when I publish it I get the error "error BC30002: Type 'ASP.SimpleCtrl' is not defined." (If I publish without the "updateable" option there's no error, but I need the site to be updateable.)

I assume this has to do with the particulars of how the assembly(ies) are built for the different compiler options. My question is, how can I get it to work properly for "updateable" publishing?

VS 2008 / .NET 3.5 sp1

The code follows (web.config is the default from Visual Studio).

Many thanks, Dave

SimpleCtrl.aspx------------------------------

<%@ Control Language="VB" ClassName="SimpleCtrl" CodeFile="SimpleCtrl.ascx.vb" Inherits="_SimpleCtrl" %>

<div>
    Simple control
</div>

SimpleCtrl.aspx.vb------------------------------

Partial Class _SimpleCtrl
    Inherits UserControl

    'Nothing to see here.

End Class

ContainerCtrl.aspx------------------------------

<%@ Control Language="VB" CodeFile="ContainerCtrl.ascx.vb" Inherits="_ContainerCtrl"

The underlying connection was closed: An unexpected error occurred on a send.

  

I am consuming a third party web service wsdl using my .net aps.net page. And I am getting following error message. Cannt get to resolve it. Its working on my machine but not in my development machine. I have installed the certificate also in certificates on that machine. Can somone please help.?

Error -->  The underlying connection was closed: An unexpected error occurred on a send.

 

 

 

 


ASMX ws: An unexpected error occurred on a receive; failing intermittently

  

Hi,

we I have asmx web service, this seems to be working fine for 25 client machines but one site keeps failing. The client gets a small dataset and tries to send it across to server to process. The dataset saved in XML file only makes 450 - 550kB. The web service is contacted twice in a short time every half an hour. The other smaller dataset (50kB) goes across everytime without any troubles. This site is not trying to send the biggest dataset, other site are sending much bigger datasets without problem. The catch is this failing site keeps retrying for 20 times (10 hours) in average and then eventually goes across. I don't think the service webmethod is erroring out as that is all wrapped up in the try and catch and the exception is not getting thrown, also every other try for the exact same webmethod used by any other client site seems to be working fine.

System.Net.WebException: The underlying connection was closed: An unexpected error occurred on a receive. ---> System.IO.IOException: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host
   at System.Net.Sockets.Socket.Receive(Byte[] buffer, Int32 offset, Int32 size, SocketFlags socketFlags)
   at System.Ne

Nintex Workflow Error: No workflows are waiting for a BizTalk message [...] No processing has been d

  

Hi,

I created a Workflow with Nintex Workflow 2007 (on SharePoint 2007) to send/receive data to BizTalk 2009. It worked fine already. But now I get the following error mesage in the EventViewer:

Nintex Workflow; Build: 11000 (http://ls457/_layouts/nintexworkflow/BiztalkHandler.ashx)
No workflows are waiting for a BizTalk message with message Id of 'GeneralAccessRequest_2010-08-23T15_00_04_44961212B370C554EDFAC41C1201ED6CEFB' on teamsite http://ls457/sites/testapp. No processing has been done.

What could that mean? Any ideas? I definitely changed nothing on the orchestration or BizTalk administration. The BizTalk action sends the data correctly to it's destination (database), but it seems that nintex doesn't receive any return data. I don't think it's a BizTalk problem, because in the BizTalk Message Tracking Database the Message is listet, so it has been sent correctly by BizTalk. But the handler probably has problems to find/receive this message.

Kind regards,

Markus

'An unexpected error has occurred' on upload after changing limit

  

Hi,

I recently changed the max upload size for attachments to TFS work items on our SharePoint site.  I did this by going to the http://tfsserver1:8080/tfs/ProductCollection/WorkItemTracking/v1.0/ConfigurationSettingsService.asmx?op=SetMaxAttachmentSize URL and entering the new size in bytes.

This worked a treat, but not I cannot upload any documents to another site on the same server.

I can open and save documents that are already there, but when I click the 'Upload' button it gives a white page with 'An unexpected error has occurred.' on it.

Is there something else I have to set when I increase the upload limit for work items?

Regards,
Isobel


System.Net.WebException: The underlying connection was closed: An unexpected error occurred on a rec

  
Hello Guys,         I am getting following exception while web service (ASMX) is returning the response. <!-- [if gte mso 10]> <mce:style> System.Net.WebException: The underlying connection was closed: An unexpected error occurred on a receive.     <!-- [if gte mso 10]> <mce:style>                                                     InnterException (System.IO.Exception): "Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host."       I think either the Asp.net web server is closing the connection or the response is too long.   Following is my simple code.    1)   namespace JFA.IndiePay.BusinessAccess { public class VerTexProcessor { public DataSet ProcessVerTexForBatch(DataSet dsInputRequest) { DataSet dsResponse = new DataSet(); //Call vertex web service here. VertexService.Service texCalculator = new VertexService.Service(); texCalculator.Timeout = 500000;

SSIS Import/Export Wizard: "Unexpected Unrecoverable Error"

  
For whatever reason, whenever the SSIS Import/Export Wizard needs to display an error message, it throws up "Unexpected Unrecoverable Error" instead. The three buttons - Abort, Retry, and Ignore - all cause the wizard to close. I see some activity in Process Monitor that looks like DTSWizard.exe is probing around for some System.Web assemblies, and not finding them. I'm running 2008 SP1 on Win 7 x86, and I've reinstalled the client tools and Integration Services. Anybody else seen this issue? Should I file a report on Connect?

Error loading workflow services

  
Hello, I'm developing a service library using the new wf 4.0 and one of my requirements is that some activities have the ability to be resumed by a client, so i created a wcf resume service that could load a workflow definition and resume a bookmark of that workflow. One of the services i created was a flowchart that has a receive reply activites inside a sequence activity has a start point, after that i have another sequence that have another sequence, yes 2 sequence activities, and my custom activity that needs to be resumed by a client. The 2 nested sequence activites was a something i used only for testing, but if i had those 2 sequence activities nested i got an error when loading that workflow definition in my resume service: 'ObtemPareceres' is not of type 'Sequence'. When loading this instance you must ensure that the activity with name 'ObtemPareceres' implements 'Sequence'. The "ObtemPareceres" is my custom activity, and if i remove that second nested sequence everything works fine. Anyone has any idea of whats going where? thanksFrederico Regateiro

The underlying connection was closed: An unexpected error occurred on a receive

  
Hi All,   i have developed a web application to call WCF service (which is hosted in IIS) from client application using .Net 1.1 it works fine.   but i got an error "The underlying connection was closed: An unexpected error occurred on a receive." when the return object is getting complex.   i analysis the issue with different level of object complexity and i found it get failed for following structure.   eg:   ObjectA - outer object that has some primitive data types and the list of ObjectB ObjectB - this also contain some primitive data and list of ObjectC.   Hope you can understand the hierarchy (complexity) of the return object. This works up to 2nd level of object hierarchy.   Does anyone have idea about the solution for this exception?   Thanks in Advance Shazvi

Failed to add relation(s) Unexpected error

  
I am getting the following error message when using the Data Source Configuration Wizard in Visual Studio 2008 to create a connection to a MySQL database.Failed to add relation(s) Unexpected error.I have found a KB article (KB954740) on the problem, but can not seem to find the fix.I have just started using Visual Studio but I am knowledgeable with VB from many years of work in Microsoft Access.Thanks in advance for any help you may provide,Ricky HicksMicrosoft Access MVP 2005, 2006, 2007, 2008, 2009 Ricky Hicks

Workflow "Error Occurred" Message

  
Hi, We have upgraded a VS 2008 custom workflow in our production environment but we are now seeing an "Error Occurred" message when starting in one site that the workflow is activated on.  It works fine on another site.  Permissions DID NOT change for users on this site before or after or during the upgrade of the workflow. It works fine in our test environment. How can I troubleshoot this in production environment (I cannot debug)? Can somebody give me a definite answer on what are the required permissions to give user to allow them to start workflows and edit only their own Tasks?  I have asked this question on a number of forums with no definitive answer.

Error Occured during workflow

  
Hi, i have created a workflow using VS2010 and deployed in SP2010 but while running the workflow its giving me a status message " ERROR OCCURED" my scenario is :  once we upload a document in library it should be copy to another site's or sub site's document library.  can i create a workflow using SPD2010 for this requirement? let me know if anybody have answer.   thanks share2010        
Categories: 
ASP.NetWindows Application  .NET Framework  C#  VB.Net  ADO.Net  
Sql Server  SharePoint  Silverlight  Others  All   

Hall of Fame    Twitter   Terms of Service    Privacy Policy    Contact Us    Archives   Tell A Friend