.NET Tutorials, Forums, Interview Questions And Answers
Welcome :Guest
Sign In
Win Surprise Gifts!!!

Top 5 Contributors of the Month
Gaurav Pal
Post New Web Links

Publish failed

Posted By:      Posted Date: September 29, 2010    Points: 0   Category :ASP.Net


I have a web application  project - when i try to rebuild it works perfect

but when i try to do publish the request failed -it happen on bin folder.

Here is the result of the publish:

Publishing folder VR...
Publishing folder VR/skins...
Publishing folder VR/skins/playerSkin...
Publishing folder bin...
========== Build: 1 succeeded or up-to-date, 0 failed, 0 skipped ==========
========== Publish: 0 succeeded, 1 failed, 0 skipped ==========

it does not give any reason why its happen.

I am understand that publish does not have to publish buin folder  - what i have to here?

The bin folder is not under source control annd i don't know what the reason of that.

I used vs2008 c#

View Complete Post

More Related Resource Links

ExpressinWeb publish failed

About a week ago I have lost ability to publish. The message that I receive is "The server sent a response which SharePoint designer could not parse". Evrything was ok prior to that.

Any idea where should I go.

I run Win 2008, IIS7.5, WebDav installed on IIS and enabled - as I mentioned I was able to publish

Publish Failed


I am publishing a web application to a remote server and it says all builds succeeded but the publish failed.
When I go to the url the code is obviously there as my new modifications are present.
What can I do to figure out why the publish is "failing"?
I don't see any error messages.

Error 1 Cannot publish because a project failed to build ? Click Once Deployment issue while publis


H! friends

Error  1 Cannot publish because a project failed to build ? Click Once Deployment issue while publishing the application ?

Can anyone tell me how to fix this problem? gone trhough many posts on net but didnt get the right solution for this ? If yu know how to fix this problem tell me plz? or any resource which can guide me to sucessful publishing


Pleas reply




Vijay Gaur


Why isn't my Views/Home/Home.Master file published when I publish my website?


Hi All,

I spent the better part of today hunting down an elusive error.  I was getting a message saying that it couldn't find the Index view for the Home controller, and it gave a list of locations it searched, e.g., ~/Views/Home/Index.aspx.  This was really confusing as the file definitely existing and was at ~/Views/Home/Index.aspx, the first place in the list of locations it searched for the view!

What I eventually discovered was that there was a file that did not get published when I used Visual Studio's "Publish" feature (this is on the "Build" menu).  That file was Views/Home/Home.master, and (as you can probably guess) is the master file used by Views/Home/Index.aspx.

Once I copied that file into place manually, it started working.  But I am left wondering--why???  Why does this file not get published?  It's a part of my project, I can see it in the solution explorer, and it's obviously a critical file that's necessary for the MVC app to run.  It has the same permissions as every other file in my project.  So why wouldn't it get copied?  And how can I fix it so it does get copied?

Thanks for any suggestions on this!


Sys.Net.WebServiceFailedException: The server method '' failed with the following error:



Let's say we have 2 time consuming functions, aaa and aaa1 inside a aspx page.

        public static string aaa(int i)
            return i.ToString();

        public static string aaa1(int i)
            return i.ToString();



        <asp:ScriptManager ID="ScriptManager1" runat="server" EnablePageMethods="true">
        <span id="displayspan"></span>
        <br />
        <input type="button" value=

WebMatrix conversion failed when converting from a character string to uniqueidentifier?


I am trying to retrieve xml from a small function in my .cshtml page. Its throwing me an error. This however, runs fine in a console/form environment.

It takes 3 parameters and 1 exception.

myDll.GetXML(year, username, uniqueidentifier, out ex);

When I run this page I get the error, "Conversion failed when converting from a character string to uniqueidentifier."

Or a stack of.

System.Data.SqlClient.SqlException (0x80131904): Conversion failed when converting from a character string to uniqueidentifier.

   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)

   at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)

   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning()

   at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)

   at System.Data.SqlClient.SqlDataReader.ConsumeMetaData()

   at System.Data.SqlClient.SqlDataReader.get_MetaData()

   at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)

   at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBeha

Failed to create AppDomain


Recently updated my system to use Visual Studio 2010, and projects will no longer compile. All of them give the error "Failed to create AppDomain." Intellisense does not work either (except for standard HTML tags), and individual pages will also not compile.

Points of note:

  • All sites are hosted on UNC shares (although it doesn't work on a new site created on local drive either)
  • Language is mostly C#
  • No explicit code is creating AppDomain objects
  • Sites compiled fine under both VS 2005 and 2008 both before and after VS 2010 installation
  • Sites compile and run fine from the IIS server on the remote machines (one IIS 6, one IIS 7)

Things I've tried (some obviously shouldn't have any bearing on it, but I've tried just about everything that anyone suggested on any forum I could find, most of which seemed to apply to IIS, not VS):

  • renaming/deleting security.config
  • running caspol -reset
  • re-registering asp.net: aspnet_regiis.exe -ua / aspnet_regiis.exe -i
  • removing VS 2005, 2008, 2010, and then re-installing just VS 2010
  • adding the UNC path to the local intranet zone (internet options control panel)
  • adding the UNC path to LocalIntranet_Zone in the ASP.Net 2.0 control panel (runtime security policy/machine/al

helped needed: ASP LDAP authentication failed in IE 8


I use the following code to do the user authentication through Active Directory using LDAP.

entry = new DirectoryEntry("LDAP://" + server, user_name, password);
if (!string.IsNullOrEmpty(entry.Name))
EmployeeNetId = entry.Username.Substring(0, 3);

// Retrieve EmployeeId, and Employee Full Name
EmployeeId = -1;

It works for Chrome, Firefox with no problem. But with IE 8, it works sometimes, and failed on some computers. When it failed, I figured that I need to check SSL 2.0 in IE 8 Internet Options.  It's weird because in those computers that IE 8 works, SSL 2.0 is also unchecked.

Am I using some deprecated method? Or How do I specifiy the SSL version options in the LDAP connection?

WCF The Security Support Provider Interface (SSPI) negotiation failed


I am using a wcf service that I created, when both hosting machine and the client machine are on the same domain everything works just fine. When I publish the client app to the webserver in the DMZ I am getting the following error:

SOAP security negotiation with '' for   
'' failed. See inner exception  
for more details.The Security Support Provider Interface (SSPI) negotiation failed.

Here is my service main where I set up the service


 Uri baseAddress = new Uri("Http://");
      ServiceHost selfHost = new ServiceHost(typeof(QBService), baseAddress);


Intermittant error: "A connection attempt failed because the connected party did not properly respon



I'm having a doozy of a problem, and can't find a solution.  I have a WFC Web Service installed to a pair of servers, and accessed through a load balancer.  I am accessing the service from an ASP.NET client app, also via WCF.  The Client is not load balanced.

I'm getting an intermittant error:

(Inner Most Exception) System.Net.Sockets.SocketException:  A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond x.x.x.x:80

(Middle Exception) System.Net.WebException: Unable to connect to the remote server

(Outer Exception) System.ServiceModel.EndpointNotFoundException:  Could not connect to http://<MYSite>/<MYApp>/<MYService>.svc. TCP error code 10060: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond x.x.x.x:80.

I can reproduce this error with about 20% reliability if I execute the exact same page request on the client from 2 browsers at the same time.  When the problem occurs, the successful p

Security negotiation failed because the remote party did not send back a reply in a timely manner. T



Dear All i have created one simple service

like this

namespace WcfService2
        public class Service1 : IService1
        public string ShowEmpName(string strFirstName, string strLastName)
            return strFirstName + strLastName;

after executing in .net command promt i got 2 files

service.cs & output.config

after that i create one class file like this

namespace WcfService2
    public class clientcs

        static void Main(string[] args)
            Service1Client client = new Service1Client();
            string strResult = client.ShowEmpName("Pradeep", "Deokar");

CLSID {00024500-0000-0000-C000-000000000046} failed with error: 80070005


Hi Guys,

I know the Microsoft do not support to automate office products. But still i am able to do that with Excel. I did some changes in registry and DCOM confing. Then i am able to open and edit excel on server machine.

Before doing this changes i was getting following error

Retrieving the COM class factory for component with CLSID {00024500-0000-0000-C000-000000000046} failed due to the following error: 80070005.

After doing registry changes problem is resolved.

I followed steps given by Smith in



But when i deployed my application on Win Server 2008 and calling from client then i am getting following same error as above


Please help me


Santosh J.


Build succeeded but still shows as failed.


 I am able to run a build successfully on just the web site, but when i add the deployment project it shows failed (see below) but in the details it says build succeeded for the WDP build portion...so I am stumped as to by I am getting a failure. any ideas? I have set the build output to "Diagnostic" and dont see any failures or errors...so is there anything else i can do to find the problem?


Build succeeded.

Time Elapsed 00:00:21.71
------ Skipped Rebuild All: Project: AdminToolHelp, Configuration: Debug Any CPU ------
Project not selected to build for this solution configuration
========== Rebuild All: 1 succeeded, 1 failed, 1 skipped ==========

ReportViewer :: Failed to enable constraints. But my statement is valid!!

  • A
  • n error has occurred during report processing.
      • Exception has been thrown by the target of an invocation.
        • Failed to enable constraints. One or more rows contain values violating non-null, unique, or foreign-key constraints.

    Why do I keep getting this error, even when not using any data on the report. When I run the query in SQL server I get a resultset. However when I try to render the report I get this error.


    Load Report Failed


    Hi All,

    I created a simple crystal report using visual studio 2008 (GAC INSTALLED VERSION 10.5.3700.0) . It is working fine locally. When I deploy it to the server when I click on the report I am seeing the empty report with  "LOAD REPORT FAILED" Text. How can I resolve this Issue?

    I checked the GAC and made sure that Both are using the same version of Crystal reports . Can some one help me how to resolve this issue?

    Configuring website to ASP.NET 2.0 failed. You may need to manually configure this site for ASP.NET


    I am trying to create a new website project in Visual Studio 2005, the website is an IIS website (ie. http://localhost/website1) and i get the following error message;

    Configuring website to ASP.NET 2.0 failed. You may need to manually configure this site for ASP.NET 2.0 in order for your site to run correctly.

    then when i try to debug the project i get the following error;

    Unable to start debugging on the web server. The server does not support debugging of ASP.net or ATL server applications.

    I am running Windows XP professional, with .NET 2.0 installed, and IIS V5.1

    How can i get a simple website to debug on my machine?

    .NET Web Services: Web Methods Make it Easy to Publish Your App's Interface over the Internet


    Web Services are a great way to accept and manage contributions to a public clip art library, digital music catalog, or corporate knowledge base. Since the SOAP interface to a Web method operates over HTTP, contributors can easily publish content any time, from anywhere across the Internet. However, accepting binary content and managing content metadata through SOAP over HTTP presents Web Service developers with some interesting design decisions. This article discusses three ways to enable content publishing using Web methods.

    Paula Paul

    MSDN Magazine March 2002

    ASP.NetWindows Application  .NET Framework  C#  VB.Net  ADO.Net  
    Sql Server  SharePoint  Silverlight  Others  All   

    Hall of Fame    Twitter   Terms of Service    Privacy Policy    Contact Us    Archives   Tell A Friend