.NET Tutorials, Forums, Interview Questions And Answers
Welcome :Guest
Sign In
Register
 
Win Surprise Gifts!!!
Congratulations!!!


Top 5 Contributors of the Month
MarieAdela
Imran Ghani
Post New Web Links

MediaElement shows old Position after i gave it a new TimeSpan.

Posted By:      Posted Date: September 28, 2010    Points: 0   Category :.NET Framework
 

I have made a mp3 player (just for fun), but has problems with making it show the right position.

To begin with i create the MediaElement, then i insert the URI with my mp3 destination.. all good.

Call .Play() on my MediaPlayer, and the Console writes the right position out from my MediaElement... all good

Then i give it a new position, jumps 30 secs into the song, and plays it from there.. all good, but now the problems show themselves.

I Play it for some secs, and pauses it for some secs. When i play it again, the console prints out the old value i gave it, and then shows the right position.

 

The only way i could prevent this, was to assign MediaElement.Position = MediaElement.Position when i called the .Pause() method. Thereby giving it the new position manually. That fixed the problem.

 

But there must be an easier way, is there not?




View Complete Post


More Related Resource Links

How to position one control relative to another one even after resizing windows?

  

I used following Jquery code trying to make image close to a table. It worked fine after first load, but the position changed after window is resized. Any ideas? thanks

$(document).ready(function() {
            var pos = $("#mytable").offset();
            var width = $("#mytable").width();
            var left = pos.left + width + 20;
            var top = pos.top + 200;
            $("#ctl00_ContentPlaceHolder1_imgPreview").css({
                position: 'absolute',
                zIndex: 5000,
                left: left,
                top: top
            });
        });


Build succeeded but still shows as failed.

  

 I am able to run a build successfully on just the web site, but when i add the deployment project it shows failed (see below) but in the details it says build succeeded for the WDP build portion...so I am stumped as to by I am getting a failure. any ideas? I have set the build output to "Diagnostic" and dont see any failures or errors...so is there anything else i can do to find the problem?

 

Build succeeded.

Time Elapsed 00:00:21.71
------ Skipped Rebuild All: Project: AdminToolHelp, Configuration: Debug Any CPU ------
Project not selected to build for this solution configuration
========== Rebuild All: 1 succeeded, 1 failed, 1 skipped ==========


setting scroll position for a ListBox

  

I have a ListBox control showing 10 rows.  I have 30 rows total in the listbox.  How do I programmatically adjust the scroll to show the last ten rows?

Some sources have suggested that I set the SelectedItem.  But I am already making selections (myListBox.Items[28].Selected = true, myListBox.Items[29].Selected = true, etc); the listbox scroll is positioned on Item[0] not the first selected item.  I have also tried setting myListBox.SelectedItem in addition to the multiple selection just mentioned but that does not have any affect either.

Suggestions?


Sharepoint site shows Service Unavailable

  

Hello everyon,

I am working sith WSS 3.0.

I have one webapplication with one sitecollection.Later i wanted to provide it HTTPS URL, so i extended the WebApplication with option-Yes in SSl field.

And in the virtlay directory properties -> Directory Security -> Secure communications -> Edit

selected Required Secure Chanel.

Thats it. I didn't do anything in that.

 

Then because of some problems , i deleted the iis website of extended webapplication from central admin.

After that when ever i try to open the site, it shows service unavailable.  And the application pool is getting disabled.

Please help me to get the site working.

 

Thanks in advance.

 


Visual Studio 2010 Shows Blank Page during web development

  

I just upgraded a web project from VS2008 to VS2010 Ultimate (Windows7 64bit, IE8/Google Chrome. When I run the web project in the development server (by hitting F5) everything acts like it is supposed to except everything comes up blank. Even the directory structure page is blank, just an empty HTML open and close shell. I get no errors no indications of failure, nothing. When I try to use google chrome I get the same blank page no matter where I navigate to, even if I try to navigate to a non-existant location on the dev server. I know the code compiles and acts correctly because I can deploy it to our QA servers without issue. Any ideas? 


how do you detect which video format can be played in a wpf mediaelement?

  
how do you detect which video format can be played in a wpf mediaelement?

Break apart timespan/duration group by hour segments

  
I need to break apart a timespan/duration value. I need to calculate the availability of resources by hour of the day. I have a call for service at 0945 that last until 1030 unit = E52 I have a call for servce at 0930 that last until 1015 unit = E53 I have a call for service at 1030 that last unitl 1230 unit = E53 query to show the following % of availabilty for said unit by hour of day 0900 to 1000 available 75% of the time for E52 0900 to 1000 available 50% of the time for E53 1000 to 1100 available 50% of the time for E52 1000 to 1100 avaialble 25% of the time for E53 1100 to 1200 available 0% of time for E53 1200 to 1300 available 50% of the time for E53   all times are actual DTS with dates, hour, minutes, seconds and can transcend past midnight. So in essence I am trying to calculate the availablity of a fire engine in your neighborhood. How often is it our of service on a call by hour of day.   Thanks   Jim

"Only their own" allows users to edit, then shows access denied page

  
I am managing a WSS 3.0 portal.  I have created custom lists where a group has contribute permissions.  Under List Settings|Advanced Settings, when I set Edit Access to "Only their own" or "None", my test users can see the Edit Icon and the Edit Item menu option, and bring up the Edit Form.  When they click "OK", they get the Access Denied page.  My experience in that past is that they should not even been shown the option to edit, and they should get Access Denied if they somehow navigate to the EditForm.aspx page.  I even tested this on a brand new site, with three Links lists, each with different Edit Access Levels (All, None, Only their own).  I added one user with contribute permissions.  He had the same result: He could get all the way to EditForm.aspx, but got "Access Denied" when he submitted his changes.  What can I do to fix this?Christopher W. Douglas

Balloon Tooltip doesn't display at the correct position when form is maximized

  
Having a problem with display balloon tooltip at the right bottom of form, the balloon tooltip displays fine if form is not maximized. However, the balloon tooltip doesn't display at the correct location when form is maximized(I guess because there is no room to display it on the right bottom of screen, so it moves up a bit). Is there a way to correct it? Such as displaying the balloon tooltip box above the control with stem points to the control. It displays the tooltip box below  the control right now which might cause the issue. Any help will be great appreciated.

TextBox shows binding source text when window load, so why not with the ComboBox?

  
How can I get a ComboBox to show the binding source value when my window opens?  I have been searching all day for a solution to this, but cannot find anything.  So I have created a sample project to demonstrate my problem.  Below is a Vehicle class, very simple, two members Category and Make.  Category is an enumeration, Make is a string. namespace ComboExample { public class Vehicle { // Constants and enumerations public enum eCategory { Road, Air, Sea } // Attributes public eCategory Category { get; set; } public String Make { get; set; } // Construction public Vehicle(eCategory Category, String strMake) { this.Category = Category; this.Make = strMake; } } } Here is the C# for the MainWindow.  A new Vehicle object is created as a member.  In the constructor I set a data-provider in the XAML to this Vehicle object.  There is a button event for showing the values of the controls and objects so I can check the binding. namespace ComboExample { // Interaction logic for MainWindow.xaml public partial class MainWindow : Window { // Attributes Vehicle m_Car = new Vehicle(Vehicle.eCategory.Road, "BMW"); // Construction public MainWindow() { InitializeComponent(); // link data-p

Balloon Tooltip doesn't display at the correct position when form is maximized

  
Having a problem with display balloon tooltip at the right bottom of form, the balloon tooltip displays fine if form is not maximized. However, the balloon tooltip doesn't display at the correct location when form is maximized(I guess because there is no room to display it on the right bottom of screen, so it moves up a bit). Is there a way to correct it? Such as displaying the balloon tooltip box above the control with stem points to the control. It displays the tooltip box below the control which might cause the issue. Any help will be great appreciated.

SSMS 2008 - Shows Service Status as Stopped Though Service is started

  
Hi, I have a SQL Server 2008 - Active/Passive Cluster. The issue I am facing here is that, when I do a Failover from Node A to Node B, All the Cluster Services come online and the SQL Services are running (checked using the SQL Configuration Manager and Services console). However when I open the management studio, The Service status Indicator shows a Red Block mark against the ServerName and the SQL Server Agent. When I try connecting to the server remotely from another server, the status is displayed correctly in the SSMS(i.e the green sign with the arrow) .  This issue happens when I locally login to the server and connect using ssms. I am an Admin on both the boxes and even the service account with which the services run also has admin privileges. Any pointers? Thanks,

How to play a .mp4 video file with WPF (mediaelement) ?

  
I would like to play a .mp4 with WPF.Does anybody know how can I accomplish it?It can play wmv but when I try to play a .mp4 it doesn't show anything. It's strange because the Blend designer shows the first frame of the .mp4 video in the mediaelement.I can play the video with Windows Media Player...Waiting for an aswer...

C# ASP.NET Problem keeping scroll position SelectionMode="Multiple"

  
Have tried numerous solutions and nothing has worked.  I'm pretty sure that Javascript is required to get this functional. Thanks for your help!    Here is the code for file Search.aspx ===BEGIN<%@ Page Language="C#" AutoEventWireup="true" CodeBehind="search.aspx.cs" Inherits="SearchApp.search" MasterPageFile="~/Site1.Master" EnableViewState="true"%> <asp:Content ContentPlaceHolderID="ContentPlaceHolder1" runat="server"> <asp:UpdatePanel ID="UpdatePanel1" runat="server"> <ContentTemplate> <fieldset> <legend style="text-align:center;"><b>Make Atleast one or multiple selections from one of the following categories</b></legend> <div class="wrapperserach"> <div> <div class="side-a"> County<asp:ListBox ID="Lcounty" runat="server" AutoPostBack="true" SelectionMode="Multiple" OnSelectedIndexChanged="Lcounty_SelectedIndexChanged" Width="140px"> <asp:ListItem value="1">Imperial</asp:ListItem>

Excel Services XLSX shows different results when accessed via Sharepoint UX vs REST

  
I have an Excel services report that connects to Project Server 2010 data via an ODC.  Looks great when I view the XLSX through the browser via the Sharepoint doc library; everything refreshes, no warnings, all is good.    But when I access this same file via the Excel Services REST call: https://myserver/_vti_bin/ExcelRest.aspx/ProjectBICenter/My%20Reports/Initiative%20Status%20Report.xlsx/model/PivotTables('InitiativeStatusSummary')?$format=html I get an older version of the report -- not refreshed with the latest data.   I have the file set to "refresh data when opening the file" in the data connectioon properties.     What am I missing?

SqlCeResultSet.Insert first position

  
Hi, is there an option to insert records in the SqlCeResultSet and put them in the first or any position?because the insert will only let me insert them in the last position, but I need in the first one.Thanks!
Categories: 
ASP.NetWindows Application  .NET Framework  C#  VB.Net  ADO.Net  
Sql Server  SharePoint  Silverlight  Others  All   

Hall of Fame    Twitter   Terms of Service    Privacy Policy    Contact Us    Archives   Tell A Friend