.NET Tutorials, Forums, Interview Questions And Answers
Welcome :Guest
Sign In
Win Surprise Gifts!!!

Top 5 Contributors of the Month
Post New Web Links

How do I check/test that my Window is clear of errors

Posted By:      Posted Date: September 24, 2010    Points: 0   Category :WPF

I am using WPF databinding and validating the input using custom Validation rules by extending the ValidationRule class.  This works great!

How I can determine that my Window is clear of all errors?

I have not found any information about this topic in the WPF Validation documentation.

Any suggestions?


View Complete Post

More Related Resource Links

Moss 2007 Document check out and check in errors


Users are receiving errors when trying to check in documents.


"The Web server is busy. Try again later."


"This document was checked out to your local drafts folder but the local copy could not be checked in to the site. Close any application that is editing the document and try to check in again, or discard the checkout."


"There is a problem with the Web server. Try again later, or contact the server administrator."

Workstation has office 2007, upgraded from 2003. Documents are being checked out, edited, and checked in properly. Any help appreciated. Thanks.

check/clear checkboxes


I'm trying to make a custom control that checks or clears all checkboxes on a page simultaneously when a designated checkbox is checked or cleared. I have this (non-working) code so far:

    Public Shared Sub CheckUncheck(ByVal container As Control, ByVal blnChecked As Boolean)
        Dim intCount As Integer = 0, intTotal As Integer = container.Controls(0).Controls.Count
        Do While intCount < intTotal
            If container.Controls(0).Controls(intCount).GetType = GetType(CheckBox) Then
                Dim chk As CheckBox = CType(container.Controls(0).Controls(i), CheckBox)
                chk.Checked = blnChecked
            End If
            intCount += 1
    End Sub

The line that's giving me trouble is the one starting with "If container.Controls(0)"... Bad syntax that gives me this message: Operator '=' is not defined for types System.Type and System.Type. What I'm trying to do, of course, is test to see if the control is a checkbox; and if it is, either check or clear it depending on the value of blnChecked.

SQL 2008 Integrity Check Mintenance Plan Errors



I have setup a maintenance plan that does an integrity check on selected databases, when the job runs it errors with the following error:

Executed as user: {Server name\username}. Microsoft (R) SQL Server Execute Package Utility  Version 10.0.1600.22 for 32-bit  Copyright (C) Microsoft Corp 1984-2005. All rights reserved.    Started:  09:04:10  Progress: 2010-10-26 09:04:16.57     Source: {202B6BA7-A187-4C97-9CF9-E7614391EF2C}      Executing query "DECLARE @Guid UNIQUEIDENTIFIER      EXECUTE msdb..sp...".: 100% complete  End Progress  DTExec: The package execution returned DTSER_FAILURE (1).  Started:  09:04:10  Finished: 09:04:19  Elapsed:  8.609 seconds.  The package execution failed.  The step failed.

I have taken the t-sql from the job and put it in another maintenance task, this runs with no problem.

All other jobs run fine on the server and this doesent happen to any other server in the company, all sql servers are configured the same and are of the same patching level.

What should i look at next to fix this problem.

Many thanks in advance.

window.location='test.aspx' not working on mobile website


Hello frds,

I'm having one problem in mobile website using jquery.

i have written a code on button click to redirect using window.location='test.aspx' it doesn't work event my javascript validation is also not worked. how to explain if your in other country give error 406 forbidden access is deny.



Content Attach database - no errors in test-spcontentdatabase but...


I have read this article, very similar to what I have dealt with http://social.msdn.microsoft.com/Forums/en/sharepoint2010general/thread/cfee3e21-0ad9-4ba8-9822-674348bd2ad6

I do not get an output error in the powershell command to test the content database after I have installed all of my steps  in the exact order after numerous setups to prevent the errors from regenerating.

Since I wasn't able to restore the website, I would start over by removing the content database and repeat the process until I get my strategy right to bring up the website, I get errors with the test-spcontentdatabase afterwards.  Why do I get errors the second time around when I never received them the first time?  Is it because I had removed the content database and the web application and started over again?  Do I need to rebuild the server each time?  I do have a snapshots of the virtual images to go back to its working point.  However to confirm my suspicions, I would need to revert with SQL box first and then the app server and respect webservers in order?  I need help with these answers as there are doubts of underlying issues of not seeing output errors the first time and only see the error outp

Checkbox hit test only on check box




I have Checkbox that spread on a whole column.

I want the the Checked event will be raise only on hte checkbox itself and the text, any other area will not responce.



   <ColumnDefinition Width="Auto" />
   <ColumnDefinition Width="*"/>

Using a CompareValidator to check input is a valid date

The CompareValidator can do more than just compare two controls. You can also compare it against several of the main .net data types such as Date, Integer, Double and Currency.

To do this you would set Operator="DataTypeCheck" and instead of setting the ControlToCompare or ValueToCompare attributes as you normally would you use the Type="Date" (or any of the data types I have listed above).

Check All with JQuery and a Asp.Net GridView

Display a Grid on the screen with a checkbox in each row. At the bottom of the page have "Check All" button.

Typically if I need to do anything interesting I use a template column. So my GridView will look like the one below (most other columns removed for readability). The only interesting point to note is the CssClass="ApprovalCheckBox" in the CheckBox ItemTemplate.

Modal popup window in ASP.Net

A Masked div or modal popup window is a child window created from the parent window which prevents the user from interacting with parent window before he returns to the parent application.

Test your skill in SQL Server

You will be given a series of 10 SQL Server related questions that are randomly selected. Since the questions are randomly selected, you will receive a different set of questions each time you start a test. At the end of the last question, you will be given your score. You can then start a new test session if you like.

check box control


Hi ,

I have a three check box in my web form ,i need to choose only one check box, if i choose one check box

another 2 check box automatically unchecked

can i use jquery for check box

I thought this would be simple... Trying to create a login does an ajax check before submit


I have the standard .net login control that is working.  (Still learning .net after 15yrs of classic)

What I want to do is OnButtonClick run a javascript function (to do an ajax call to the db to check if login is valid or not) and if it returns true, then submit the form normally, else don't submit. The piece that I can't figure out, is how to correctly override the default click even to hit my JS routine and then submit the form properly afterwards.

Thanks ahead of time

lossing focus from model pop up window controls


hi i using a model pop up window with some textbox but when i click on textbox of model pop up focus move to back to page textbox control plz help me 

how to check a textbox value in jquery?



I want to perform some action when an asp.net textbox value length is greater than 1 character. And for this I wanted to know how to write this check in jquery?

I have created a check like below-

if ($('[id=txtUserInput]').val().length > 2)
{ do some work...} 

But its giving me the following error

$("[id=txtUserInput]").val() is undefined

Can anybody let me know the right way of doing this?



How can I be sure that my entire project is up-to-date and free of errors in VS2010?


Seems like a stupid question, but I will go to Build > Build Solution many many times and the build will succeed many many times, then I will put in a minor syntax error and the build will fail, BUT the build will not fail because of the minor syntax error; it will fail because of an unresolved type that I put in about twenty compiles ago. And then I will fix the minor syntax eror, and the compiler will still complain about the unresolved type. Here is my code:

<%@ Register TagPrefix="FTB" Namespace="FreeTextBoxControls" Assembly="FreeTextBox" %>
  <form runat="server">
  Hello World!!  

Pretty simple, really. I go to Buld > Build WebApplication1 and it runs OK. Now, if I put in a minor syntax error, such as substitute "forrrrrrrm" for "form" and then try to Build Solution, it complains not about the misspelled word, but about the FreeTextBox. And then if I correct the misspelled wird, it still complains about the FreeTextBox. Which leads me to believe that Building the Solution does not check absolutely 100% everything that needs to be checked. Is there a more thorough way of compiling a program that I need to use?

How to check for null/empty strings on dynamic objects?


What is the proper way to check for null or empty strings on dynamic objects? This is the only solution I've found so far:

if (admin.PasswordHash.GetType() == typeof(DBNull) || admin.PasswordHash == string.Empty)

If the field is null, the object returned is DBNull.Value, but if the field is empty string, it's return as a System.String object. This makes it impossible to do regular "admin.PasswordHash == DBNull.Value" check, as that will fail whenever the field has been set to empty string. Is my example the right (and only) way to go?

Automatically redirect to HTTPS and check if SSL is active



I've set in the web.config:

    <!-- User Authentication -->
    <authentication mode="Forms">
      <forms loginUrl="~/Page/View/Content/Login.aspx" timeout="2880" requireSSL="true" />

This works fine. If there is no ssl connection, the login form doesn't continue. But I would like to check if ssl is active (in codebehind) and, if it's possible, to automatically the user to the https page if he's currently on http. (I could do this job by manually redirect with page.response("https://url.../login.aspx"); but this is not really generic. For example if the webapp is moved to another domain it doesn't work anymore... I'm looking for something like: FormsAuthentication.RedirectWithSSL(); or so... :D)


ASP.NetWindows Application  .NET Framework  C#  VB.Net  ADO.Net  
Sql Server  SharePoint  Silverlight  Others  All   

Hall of Fame    Twitter   Terms of Service    Privacy Policy    Contact Us    Archives   Tell A Friend