Post New Web Links

WCF project -- x64 Compilation Error

Posted By: Posted Date: September 19, 2010 Points: 0 Category :.NET Framework

Hi All,

I have 5 BizTalk projects in a sloution and sixth one is WCF Project.When I try to build all the projects are build successfully except WCF Project.
All the Projects have been developed in x86 Env, but I creating build on x64.

Following is Error:The OutputPath property is not set for this project. Please check to make sure that you have specified a valid configuration/plaftform combination. Configuaration='Release' Platform'x64'

Thanks in Advance,
Krishna

View Complete Post

More Related Resource Links

Imported Workflow project does not compile "error 348: Compilation failed. Unable to load one or mor

Original workflow project was compiled on 32 bit machine. I exported it to VS.Net 2010 and it fails to compile. Has anybody seen this error? -Stan

Workflow project compilation fails with error 348: Compilation failed. Cannot execute a program.

Hi, I am trying to build a workflow project on a PC and I am getting the "error 348: Compilation failed. Cannot execute a program." error. This project is part of a bigger solution and it used to build just fine on my PC. Also, the project and the solution build OK on several other computers. I am sure that the problem is something on my PC. 1. I am not sure what changed to make the project start failing. 2. I tried to delete the project, source and all folders from the disk and sync to the source control again 3. Re-installed the .NET 3.5 framework 4. Uninstalled Visual Studio 2008, deleted the visual studio folder under program files, and reinstalled VS 2008 5. I noticed the the file referenced in the error "...Temp\8sl_helt.cmdline" does not exist under the Temp folder. An empty folder called "8sl_helt"however is created, but there is no file with the cmdline extension. I turned up the output log to "diagnostics", this is the output generated when the error happens. Have anybody seen this? Done building target "_ComputeNonExistentFileProperty" in project "QCReviewWorkflowLibrary.csproj". Target "CreateWorkflowManifestResourceNames" skipped. Previously built successfully. Target "WorkflowCompilation" in file "C:\Program Files\MSBuild\Microsoft\Windows Workflow Foundation\v3.5\Workflow.T

All my server-controls became unrecognized!!! like there's compilation error or web.config missing!

hi!

please help - the problem is in post subject.

I have lots of warnings with following text:

"Warning 10 Element 'HyperLink' is not a known element. This can occur if there is a compilation error in the Web site, or the web.config file is missing. C:\Users\Pavel\Documents\Visual Studio 2010\WebSites\BioWebSite\ToScientist.aspx 26 18 C:\...\BioWebSite\"

But web.confg is there! And there's no compilation error!

Site builds just fine. And If I upload it to my hoster - it works!

But with all these errors I cant add controls to pages - VS2010 adds hyperlink without ID, and intelisens stoped to work.

Strange, but in my other project (web-application) I have no such difficuty.

VS 2010 and error while compiling Workflow project

Get the following message: ------ Build started: Project: DSS_IP_WorkFlow, Configuration: Debug Any CPU ------ C:\PRJ\JD Powers\DssIP\DSS_IPSoln\DSS_IP.2010\DSSIP\DSSIP-Simulator\DSS_IP_WorkFlow : error 348: Compilation failed. Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information. What I'm doing wrong to my project?

state machine workflow project creation error

Hi, I have a dev environment which i had sharepoint 2007 and now i upgraded it to sharepoint 2010. Now when i try to create a state machine workflow project it gives me an error Object Reference not set to an object. I uninstalled Sharepoint extensions 1.3 (as i 64bit win2008 vm) and when i am trying to install it. In one of the installation screens where it asks for the port no and the select the app pool it only shows the sharepoint central v3 app pool . i was expecting to have sharepoint 2010 product app pool in the drop down. I know that there should be a app pool on port 80. Since i upgraded sharepoint to 2010. I want sharepoint visual studio extensions 1.3 to point to sharepoint 80 app pool . Please can you tell me how i can do it.

Element 'LengthValidator' is not a known element. This can occur if there is a compilation error i

Hi everyone, I got this errors while trying to use an example from the ASP.NET 3.5 Unleashed book. Webform1.aspx<%@ Page Language="C#" AutoEventWireup="true" CodeBehind="WebForm1.aspx.cs" Inherits="WebApplicationFour.WebForm1" %> <%@ Register TagPrefix="custom" Namespace="WebApplicationFour" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head runat="server"> <title> Show Length Validator </title> </head> <body> <form id="form1" runat="server"> <div> <asp:Label Id="commentLabel" Text="Comments :" AssociatedControlID="commentTextBox" Runat="server" /> <br /> <asp:TextBox Id="commentTextBox" TextMode="MultiLine" Columns="30" Rows="2" Runat="server" /> <custom:LengthValidator Id="lengthCommentValidator" ControlToValidate="commentTextBox" Text="( Must be at least 10 characters )" Runat="server" /> <br /> <br /> <asp:Button Id="submitB

Error 102 Element 'ScriptManager' is not a known element. This can occur if there is a compilation

I have the same problem with my personal website project : Error 102 Element 'ScriptManager' is not a known element. This can occur if there is a compilation error in the Web site. I have made my web.config file myself. It's strange because the Element 'ScriptManager' is recognize in the SampleWebSite (which contains examples of ajax toolkits). But it's not recognize in my website project ... Do you think is due to my web.config is incorrect ? I send you my web.config : <?xml version="1.0"?> <configuration xmlns="http://schemas.microsoft.com/.NetConfiguration/v2.0"> <configSections> <sectionGroup name="system.web.extensions" type="System.Web.Configuration.SystemWebExtensionsSectionGroup, System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"> <sectionGroup name="scripting" type="System.Web.Configuration.ScriptingSectionGroup, System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"> <section name="scriptResourceHandler" type="System.Web.Configuration.ScriptingScriptResourceHandlerSection, System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="false" allowDefinition="MachineToApplication"/> <sectionGroup name="webServices" type="System.Web.Configuration.ScriptingWebServicesSectionGroup,

Compilation Error

Hello,I am using vs 2010, and working with MVCI create a .dbml file, drag tables on it.Writing queries using LINQ.....When I Run My Project. It Give Following ErrorCompiler Error Message: CS0012: The type 'System.Data.Linq.DataContext' is defined in an assembly that is not referenced. You must add a reference to assembly 'System.Data.Linq, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.What About This.. ??Regards

VS2010 Deploying Database Project - Error: Cannot create file [...]MSSQL10.MSSQLSERVER\MSSQL\DATA\m

I had SQL Express from a previous installation of VS2010. I uninstalled All SQL and VS2010 and re-installed VS2010 (without Express) and then re-installed SQL Server 2008 Developer Edition. Now when I try to deploy a database project I am receiving the following error: Creating EDDY.Cheetah.Database.Server... ...\sql\debug\Server.sql(38,0): Error SQL01268: .Net SqlClient Data Provider: Msg 5170, Level 16, State 1, Line 1 Cannot create file 'C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\mastlog.ldf' because it already exists. Change the file path or the file name, and retry the operation. ...\sql\debug\Server.sql(38,0): Error SQL01268: .Net SqlClient Data Provider: Msg 1802, Level 16, State 4, Line 1 CREATE

Error on VS 2008 Class Library project: are you missing an assembly reference?)

http://msdn.microsoft.com/en-us/library/bb153523(office.12).aspx Working with ASP.NET 2.0 Web Parts and Windows SharePoint Services 3.0 Based on the above MSDN Walkthrough, I created a Class Library VS 2008 project. When clicking the Build menu, 11 errors on System.Web.Security etc popped up. What's wrong? *********************************************** using System; using System.Web; using System.Web.Security; using System.Web.UI; using System.Web.UI.WebControls; using System.Web.UI.WebControls.WebParts; using System.Web.UI.HtmlControls; Error 1 The type or namespace name 'Security' does not exist in the namespace 'System.Web' (are you missing an assembly reference?) Error 2 The type or namespace name 'UI' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)

Adding Oracle table into SSIS project --Oracle error occurred, but error message could not be retrie

Hi all I am new to design SSIS packages,to day I stated creating package SSIS package and adding the Tables,while adding tables,one of the table giving an below error . I verified the table structure it has one "CLOB" datatype. can some body help how to add this table( whole idea of the package is I have Dump those tables with structure and Data to SQL Server 2008 Database) =================================== Oracle error occurred, but error message could not be retrieved from Oracle. Data type is not supported. (Microsoft Visual Studio) ------------------------------ Program Location: at System.Data.OleDb.OleDbCommand.ProcessResults(OleDbHResult hr) at System.Data.OleDb.OleDbCommand.PrepareCommandText(Int32 expectedExecutionCount) at System.Data.OleDb.OleDbCommand.ExecuteReaderInternal(CommandBehavior behavior, String method) at System.Data.OleDb.OleDbCommand.ExecuteReader(CommandBehavior behavior) at System.Data.OleDb.OleDbCommand.ExecuteDbDataReader(CommandBehavior behavior) at System.Data.Common.DbCommand.ExecuteReader(CommandBehavior behavior) at Microsoft.DataWarehouse.Design.DataSourceConnection.FillDataSet(DataSet dataSet, String schemaName, String tableName, String tableType) at Microsoft.AnalysisServices.Design.DataSourceDesigner.AddRemoveObjectsFromDSV() Thanks in Advance. SNIVAS

Adding new page to WPF project causes key error.

I'm adding a second page to my project in a sub folder and I get the following compile time error: Error 1 Unknown build error, 'An item with the same key has already been added.' WinTools

Visual Studio Compilation Error - LC.EXE

I am using Windows XP SP2, and working on MS VS .NET 2005. My application was working fine till I installed few windows updates. Now on compilation I get an error message - ""LC.exe" exited with code -1073741819." Someone told me that this could OS bit problem. I checked in My Computer->properties ->advanced->environment variables ->system variables->Processor_Architecture which states x86 over there. I am not able to compile my applications due to this problem. The application was working normaly. I think the software updates caused this problem, I even uninstalled the updates but then nothing helped. I am stuck on this. Someone please help. Highly urgent.

Compilation error after inserting script

I have a one page ASP.Net site; there is no separate code-behind file. It pulls its data from a SQL ODBC connection; All was well, until I tried to include script to change the color of the row, based on a condition. Normally, the backcolor is black; and the forecolor is white; the forecolor should change to blueviolet when the field "flex_in" is not null. Here is the code:

<%@ Page Language="C#" %>

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">

<script runat="server">

ASP.NET Security Vulnerability Error Handling Project Part 3

In ASP.NET Security Vulnerability Error Handling Project Part 1 , we discussed implementing a project that utilizes the suggestions made in Scott Guthrie's post on ASP.NET Security Vulnerability . Even after Microsoft releases a patch for this security vulnerability, this working project will still be valuable for generating your error messages and sending emails. I showed how to setup the web.config file, add the sleep delay, and optionally display the error to the screen for developer debugging...(read more)

ASP.NET Security Vulnerability Error Handling Project Part 2

ASP.NET Security Vulnerability Error Handling Project Part 1

After having read Scott Guthrie's post on ASP.NET Security Vulnerability , I decided to take my existing error handling code, update it with his suggested sleep delay, and put it into a separate VB.NET Visual Studio project to share with others. In my project, you may optionally display the details of the error on the page if you update the code to set the debug flag to true, for instance, if the developer is logged in. I also send the error message and site specific details to the developer via...(read more)


Categories:

ASP.Net	Windows Application	.NET Framework	C#	VB.Net	ADO.Net
Sql Server	SharePoint	Silverlight	Others	All