ACE Driver 64 bit

I Am Continiously Getting Error For Following Line Of Code, It Work  Fine In Other Database

Am I Doing Any Mistake

if (sh3itno != "" && dpsh3no != "")
            {
                string queryy = "SELECT [CHEQNO] FROM [SH3MAST] WHERE (([CHEQDATE] = " + chqdate + ") AND ([FAVOUR] = " + favour + ") AND ([CHQTYPE] = " + ctype + ") AND ([TRSTN] = " + trstn + ") AND ([TRBANK] = " + trbank + ") AND ([SH3ITNO] = " + sh3itno + ") AND ([DPSH3NO] = " + dpsh3no + "))";
                OdbcCommand cmd3 = new OdbcCommand(queryy, connen1);
                connen1.Open();
                string chqno =cmd3.ExecuteScalar().ToString(); (Here Iam Getting Error)
                tbl.Rows[i]["cheque no"] = chqno;
                connen1.Close();
            }

Stack Trace: 


[OdbcException (0x80131937): ERROR [S1000] [Microsoft][ODBC Visual FoxPro Driver]Function name is missing ).]
   System.Data.Odbc.OdbcConnection.HandleError(OdbcHandle hrHandle, RetCode retcode) +39
   System.Data.Odbc.OdbcCommand.ExecuteReaderObject(CommandBehavior behavior, Strin

Hello,

I want to interface the software Sage ventpartner with sharepoint.

For that i have to use the odbc {codebaseStand} driver and i know that the following string is working :

driver={CodeBaseOdbcStand};dbq=C:\ventpart\database;uid=login;pwd=password

The pb is when i construct my bdc xml file i have to enter :

<Properties>
        <Property Name="rdbconnectionDriver" Type="System.String">{CodeBaseOdbcStand}</Property>
        <Property Name="rdbconnectiondbq" Type="System.String">c:\ventpart\database</Property>
        <Property Name="rdbconnectionuid" Type="System.String">administrateur</Property>
        <Property Name="rdbconnection Trusted_Connection " Type="System.String">yes</Property>
        <Property Name="DatabaseAccessProvider" Type="Microsoft.Office.Server.ApplicationRegistry.SystemSpecific.Db.DbAccessProvider">Odbc</Property>
        <Property Name="SsoApplicationId" Type="System.String">23</Property>

In our testing, batch inserts are more than 4 times faster on Oracle with the Oracle JDBC driver than on SQL Server with either the Microsoft or jTDS JDBC drivers on the same hardware.  The issue appears to be with the JDBC driver, not the database server.  We have run tests with SQL Server 2005/2008 on a number of machines with similar results. The following code shows a simplified example of the code we are executing.  It uses a 2 column table which has an index on the id column.  In the test program we are inserting 100k rows with a batch size of 10k.  Any suggestions on improving the performance with the SQL Server JDBC driver?   private void testBatchInserts(Connection conn, int rows, int batchSize) throws SQLException {     String sql = "INSERT INTO Bench (id, name) VALUES (?, ?)";     conn.setAutoCommit(false);     PreparedStatement stmt = conn.prepareStatement(sql);     int batchCount = 0;     // For each row...     for (int i = 1; i <= rows; i++) {       // Create the record       stmt.setInt(1, i);       stmt.setString(2, "ROW #" + i);       // Add it to the batch       stmt.addBatch(); &nb

I'm an new bie to "SQL Server 2005 JDBC Driver". I have downloaded SQL Server 2005 JDBC driver and extracted it to C:\Program Files\Microsoft SQL Server 2005 JDBC Driver\. Is the installation complete now? How can I use this driver from my application? If there is a step-by-step instruction on whether we need to run some scripts in SQL Server or to configure some system variables, it would be great. Thanks in advance for your time in this.Cheeeeerrzzzz! S@kthi http://blogs.msdn.com/sqlsakthi | http://twitter.com/PowerSakthi Mark as Answer if it helps. This posting is provided "AS IS" with no warranties and confers no rights.

I am using JDBC 1.2 driver to connect to Sql Server 2005 database and i am facing the application crash issues several times and javacores shows that the crash happens during JDBC call. This issue is happening several times in our application, please let me know if an upgraded driver version will fix the problem or to investigate the driver issue further NULL            1XMCURTHDINFO  Current Thread Details NULL           ---------------------- 3XMTHREADINFO      "WebContainer : 8" (TID:0x5946E100, sys_thread_t:0x51D052F0, state:R, native ID:0x000008AC) prio=5 4XESTACKTRACE          at com/microsoft/sqlserver/jdbc/PLPInputStream.getBytes(Bytecode PC:64(Compiled Code)) 4XESTACKTRACE          at com/microsoft/sqlserver/jdbc/DDC.xmlPLPToObject(Bytecode PC:132(Compiled Code)) 4XESTACKTRACE          at com/microsoft/sqlserver/jdbc/ServerDTVImpl.getValue(Bytecode PC:216(Compiled Code)) 4XESTACKTRACE          at com/microsoft/sqlserver/jdbc/DTV.getValue(Bytecode PC:216(Compiled Code)) 4XESTACKTRACE          at com/micro

I need to write a database driver for a custom language that has been ported to .net.  I know this is a really broad question... but where do I even start?  If I want to just translate a simple command in their language to a simple select and send it natively to sql server. Modifying the programs isn't an option as there are thousands of programs written in this language.

I know that there is no ODBC driver available for SQL Server Compact Edition version 3.5.  Do you plan to add an ODBC driver in future release? If yes, is it high in your priority list?   The scenario why I am looking for an ODBC driver is to connect an MS Access application to a SDF file instead of MDB file.  This will enable me to easily sync the SDF file with SQL server repository using the new Data Sync Services.   Mario Cardinal MVP Solutions Architect

Hi, Earlier, we found problems with using SQL CE 3.5 via OLEDB. While some limited functionality was available and data can be accessed via commands and recordset via OLEDB/ADO from, say, Excel or Access, we were unable to access SQL CE directly from other data-driven packages that nominally support OLEDB, most importantly SAS and SPSS. So our question is whether SQL Server Compact will feature an updated and more capable OLEDB driver? Thx and regards, Ralph

I'm setting up a local OMPM (Office Migration Planning Manager) application, which requires an SQL Server database. I installed SQL Server Express successfully. When I run the OMPM script to create the database (CreateDB.bat) I get the following error: SQL-DMO Install Required: This operation requires the SQL Server ODBC Driver, version 3.80 or later, which comes with SQL Server 2000, SQL Server 2005 and SQL Server Express. I installed SQL Server Express with this file "SQLEXPR32_x86_ENU.exe" Could it be that the ODBC Driver was not registered correctly during the install of SQL Server Express? Alternatively, where can I find the missing driver? Thanks in advance, Maurice

I'm getting the following exception when attempting to connect to SQL Server 2005 using Microsoft's new JDBC driver: com.microsoft.sqlserver.jdbc.SQLServerException: The TCP/IP connection to the host  has failed. java.net.ConnectException: Connection refused: connect The help docs suggest checking connectivity using telnet. So attempting to connect via telnet to 127.0.0.1:1433 generates: Could not open connection to the host, on port 23: Connect failed. So I try to start telnet: net start telnet I get the following error message: The service cannot be started either because it is disabled or because it has no enables devices associated with it. Can anyone help? Thanks

Ok, i have seen tons of articles on the error, but still can't figure it out. This is being executed through nested procedure calls, until it is roughly 3 levels deep, then makes a call to Sybase using dynamic SQL and OPENROWSET. The message that is returned is listed below. Yes, i looked up all I could find on it. The thing I find interesting is I can simply take the dynamic SQL and the openrowset call out and run it in query analyzer just fine. but when I run it through the procedure it generates the errors. Any thoughts?   [OLE/DB provider returned message: [MERANT][ODBC Sybase driver]Distributed transaction enlistment failed.] Server: Msg 7391, Level 16, State 1, Line 1 The operation could not be performed because the OLE DB provider 'MSDASQL' was unable to begin a distributed transaction. [OLE/DB provider returned message: [MERANT][ODBC Sybase driver]Load of XA library failed.] OLE DB error trace [OLE/DB Provider 'MSDASQL' ITransactionJoin::JoinTransaction returned 0x8004d00a]. John M. Couch Insight Enterprises Inc. 6820 S. Harl Ave, Tempe, Az 85283 Email: john.couch@insight.com

I have come across a bug in the ODBC driver for SQL Server when working against SQL Server 2008 64-bit with TDE where tables contain text-datatypes. We concluded that it is a bug after testing a simple SQL query using Microsoft ODBC test tool (odbcte.exe) and the workaround for us was to start using the "SQL Native Client 10" instead. However I would like to share this information if someone else come across this problem. Below I will describe the problem in more detail. The table has three columns with text datatypes and we use a simple select query against this table to return about 10 rows of data but SQLFetch hangs before all data is returned. It is unfortunately very difficult to reproduce the errror since even a very small change will change the behaviour. If we for example add or remove a column to the select statement then the problem will dissappear, if we call SQLBindCol before instead of after SQLExecute (or the other way around) the problem will dissapear, if we change the WHERE-clause to fetch a different set of rows the problems will dissapear. We have seen the problem though with a number of different SQL queries so it is reproducable.

Hi All, When we try to connect to a sql server 2000 using SQL server authentication, we are facing the below mentioned error msg. "Server: MSg 17, Level 16, State 1 [Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied" But, once we connect to server using Windows NT login from the client machine, i.e., execute the below command in the run prompt and provide the credentials for windows login, we are able to connect to the server using sql server authentication(user name: sa) \\server_ipaddress\c$ When we went though some of the msdn links, found that windows firewall was the major cause. But, in the server 1. Windows Firewall is turned off 2. TCP/IP and NamedPipes are enabled 3. Default Port Number is 1433 Any user, who wants to connect to the SQL Server using SSMS, first have to perform a Windows NT login and then connect using SQL authentication.  Due to the above error, the DTS packages which are executing in a different server are getting failed. NOTE: Even after connecting to the server using Remote Desktop connection in a local machine, SQL authentication fails. Its manadatory to run the command \\server_ipaddress\c$ in each of the local machine. Any suggestion to resolve the above error is very much appreciated.   Thanks in advance, Raksha Hegde       

Our application used Inet opta driver. Would like to try out the Microsoft driver. If you have used this driver, please provide more info on Microsoft jdbc driver 3.0.

I have been trying for the past 2 weeks to get my MP3 player to connect as a MTP and not a MSC, unfortunately to no success. We have 3 of the same MP3 players and none of them will connect as a MTP. I can get Rhapsody to work on the cpu, Media Player 11 will work on the cpu but in device manager the MP3 will still come up as a MSC and not a MTP. This cpu is a brand new build with me still using Windows XP PRO from the previous build however I had Media Player 10 on the last build and now I have 11 with the most current Rhapsody version 5.337. My previous build was a P4 this one is a AMD build. I don't believe that is the problem.  I have tried the following items and am at a loss as to what to try next. I have worked with Rhapsody and Phillips on the following items; reinstall all of the Rhapsody software (5 times), reinstall windows media player 11 (3 times), clean and clear MP3 reinstall software (7 times), deleted and reinstalled USB drivers (2 times), reinstalled the MTP drivers seperately and just yesterday I have performed a complete reinstall of windows and all drivers to no avail. MP3 player information is model SA1VBE04KW/17 All windows software is current and up to date. System informatio as follows; Microsoft Windows XP Professional, Verison 2002, Service Pack 3 Computer information; AMD Phenom 8250e, Triple Core Processor, 1.91

When i attempt to fill my Crystal Report -named limitler.rpt and it is under the sub-folder Oraburslar of my project -, i get the following error; "ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified. Error in File C:\DOCUME~1\KEMAL~1.ESM\LOCALS~1\Temp\limitler {148B6FE6-D5BE-4BC3-A13A-47CCCB79D78B}.rpt: Unable to connect: incorrect log on parameters." How can i handle this pro? Thanks in advance... Here is how i connect to database to fill the Crystal Report:string database = ConfigurationManager.AppSettings["Database"].ToString(); string password = ConfigurationManager.AppSettings["Password"].ToString();string username = ConfigurationManager.AppSettings["Username"].ToString(); string server = ConfigurationManager.AppSettings["Server"].ToString();ReportDocument report = new ReportDocument();report.Load(Server.MapPath("~/Oraburslar/limitler.rpt")); report.SetDatabaseLogon(username, password); CrystalReportViewer1.ReportSource = report; CrystalReportViewer1.BackColor = System.Drawing.Color.White;

Many apologies for posting here, but it's the nearset I can find. I am running the Windows 7 RC (x64) and need the MS Access 32-bit ODBC driver in order to connect to an in-house application. The driver doesn't appear to be shipped with Windows 7 and I cannot find anywhere to download it.On further inspection, the 32-bit SQL Server ODBC driver appears not to ship either and I need that as well.