.NET Tutorials, Forums, Interview Questions And Answers
Welcome :Guest
Sign In
Win Surprise Gifts!!!

Top 5 Contributors of the Month
Gaurav Pal
Post New Web Links

Subscription reports Last Results as "Ready"

Posted By:      Posted Date: September 07, 2010    Points: 0   Category :Sql Server
User setup subscription looks like it runs, but continues to report the "Last Results" for the subscription as "Ready".  The user never received the report, so it seems to be caught up in rendering to PDF or sending the email.  Any ideas on how to track this down?  I've set the subscription to fire immediately a couple of times and both times it runs and then gets caught in this "Ready" mode. We are on SQL Server 2008, but not R2 and we're running integrated with Sharepoint.  Thanks!!!

View Complete Post

More Related Resource Links

Problem with date values in data-driven subscription reports

Hello together, I have a question in regards of data-driven subscription report. I already have an ad-hoc report in place which can be customized by date etc. I now want to run these reports with a subscription. My challenge is now that I don't know how I can pre-define the date. I basically want the start date of NOW() and the end date 7 days in the past. I was looking around but did not get any clue where and how I have to configure it the way it works. I found this thread but honestly do not understand it well... :( http://social.msdn.microsoft.com/Forums/en-US/sqlreportingservices/thread/fb48fd15-09dd-4f5f-a09f-d92bf304c1a2 Can someone help me out please? M.

SSRS 2008 - email subscription - 7 minute delay between two reports emailed out (normally less than


We have a report subscription that emails out through a 3rd / separate smtp server.

I was watching the progress on the report server subscription page (where it shows executing, x of y completed, 0 errors) and noticed a long pause between updates about half way through the subscription.


It sends out around 500 emails and email 475 of 500 was still on screen after a few minutes (it hadn't ticket up to 476, or 479, etc...)


So I quer

Regarding the Subscription of SSRS reports from the Sharepoint Portal.



         At present, I am having some SSRS reports hosted on share point portal and For one report, I am subscribing thorugh manage subscription by mentioning the dropdown values (The Selections which are required for the report) as parameters. So that, I am going get a mail for the report for the selection which I made from the report.

Now The Issue is, for every combination I should need to select the parameters and need to subscribe for that. Is it possible to mention all the selection crieteria at once and run it in one shot?

Can we write any backgroud job to complete all the selection criterias at once?

Please help me on this.

Thank you!!



Data driven subscription not working with Multivalued parameterized reports



I am working with SQL server 2008 R2 , and creating a datadriven subscription with multivalues parameters. But its not working.

Report error Log is showing that "Default value or value provided for the report parameter 'category' is not a valid value.;"

I am passing the multivalue with comma separated value.

So, I want to know whether this works in 2008 or not.

Any kind of solutions you have, please welcome.....


jQuery $(document).ready() and ASP.NET Ajax asynchronous postback

Many call it the ASP.NET jQuery postback problem, but using the technique below should make it no problem anymore. $(document).ready() isn't called after an asynchronous postback. What this means? You lose the functionality that should be executed within $(document).ready() after an UpdatePanel rendered its contents after an asynchronous postback.

Ready made List Types provided by SharePoint

SharePoint provides some out of the box List Types. Some of the most used ready made list types that SharePoint provides currently are listed below:

Viewing Reports with SharePoint 2.0 Web Parts

Reporting Services provides several Web Parts that work with specific versions of a report server and in particular deployment modes. If you want to access report server content on a SharePoint site from a native mode report server, use the SharePoint 2.0 Web Parts that are included with Reporting Services. Instructions for installing and using the 2.0 Web Parts are provided in this topic.

crystal reports on mvc 2 vs2008


hi, i'm a new user of mvc 2, so, i need to use crystal reports on mvc 2, actually, i'm developing on visual studio 2008, but i can´t run my reports. it's posible run my reports???

thank you very much.

Session with Crystal Reports on IE 8



Having a very wierd problem.  I have an application that uses Crystal Reports and it uses what I have found to be a common scenario (I am not a CR expert in any way).  I have an ASPX page that gathers options for the report, and then it goes and gets the data and if there is some, a button appears for them to launch the report.  On clicking that button, the code sets some values in the HttpResponse.Context area, then performs a Server.Transfer to another ASPX page that is our Report Template.  This page contains the CR stuff and it generates a PDF version of the report.  It then does the following code:

 With HttpContext.Current.Response
            .ContentType = "application/pdf"
            .AddHeader("Content-Disposition", "inline; filename=Report.pdf")

Business Intelligence Reports Project in Visual studio 2008 ?



I wonder how to add a project template called  Intelligence Reports, something like that, to Visual studio 2008. I have SQL 2008 installed. Do I need to install some updates to get Intelligence Reports template to Visual studio 2008 ?

Thank you..

Need Syntax To Make Results of LINQ Union Return Non-Generic Type



I have the below SQL which works just fine:

SELECT     Message, CreateDate, AccountId, AlertTypeId
FROM       dbo.Alerts
SELECT     TOP (100) PERCENT Status, CreateDate, AccountId,
                          (SELECT     10 AS Expr1) AS AlertTypeId
FROM         dbo.StatusUpdates
WHERE AccountId = PassedInParameter

I have been going about trying to convert the above into a LINQ method and am having problems with return types.
As the above SQL illustrates, I am querying two distinct LINQ tables - Alerts and StatusUpdates -
and then attempting to perform a Union on them. In order to do the union in LINQ, I have to have agreeing types. So, I
am using "var" to make the results of "alerts" and "updates" generic before the union.  

public IList GetStatusUpdatesAsAlertsByAccountId<T>(Int32 accountId)
            using (WorkbookDataContext dc = _conn.GetCont

sqlDataReader dos not get results


I am trying to run a stored proc from this function. When I run it thorugh the debugger I can see that myReader.HasRows = true and myReader.FieldCount =14.

But the control does not go in the loop while (myReader.Read()) where I am trying to read Version field returned by the stored proc.

Pls check me code and suggest correction. Thank You.

private static int Get_CaseInfo(string CaseNum)
            int Ver = 0;
            String myConn = ConfigurationManager.ConnectionStrings["DBConnectionString"].ToString();
            SqlConnection conn = new SqlConnection(myConn);
            SqlCommand cmd = new SqlCommand();
            cmd.CommandType = System.Data.CommandType.Text;

            SqlDataReader myReader = null;
            String stmt1 = "EXEC [REPORTS].[CaseInfoByCaseNo_Get] @CaseNo = '" + CaseNum + "'"; 
            cmd.CommandText = stmt1;
            cmd.Connection = conn;
                myReader = cmd.ExecuteReader();
                while (myReader.Read())
                    Ver = (int)myReader["Version"];

            catch (Exception)
            return Ver;         

displaying xsl results in browser


Hi guys,

How can I test what my xsl spits out in the browser, rather than just viewing the xsl itself?


Reports Editing



            I opened my reports in Business Intelligent Development Studio 2005. I want to edit reports.

I m newbie to these reports. Is it the right way to Open in Business Intelligent Development Studio 2005.

How can I edit the reports after that.? Can anyone help me from beginning.


displaying dynamic added value in reports



I my application i have generated dynamic rows that contains some textbox values, i need to take those values and display in

reports. I am storing that dynamically added values in another table. please help me.

dynamically change column names in Crystal reports


I need to develop 3 pages.

On the first page user defines atmost 7 column names to be displayed on the report. I'm saving these names in a Sql DB table 'Columns' with Column_Nm and Column_ID as Table columns.

On the second page I'm retrieving column_Nm from the table and displaying them on the page so that the user enters the data. This data is saved in another table 'Summary' with the Columns column1 through column7.

on the 3rd page I need to show a report of 'Summary' table.

How do I dynamically replace column1 through column7 names with that of 'Column_Nm' on the report?

Any help/suggestions would be appreciated.


Desperately need help with crystal reports


Hi All,

 I am new to .Net and And I have absoutely no idea about crystal reports. Can anyone please let me know a step by step process of how to design and generate a crystal report in vs2005

I need to ask for start date and endate.. when selected .. i should genarte a report using the existing stiored procedure and the connection string in my web config file..

Please  help.........

Your help willbe very much appreciated..


ASP.NetWindows Application  .NET Framework  C#  VB.Net  ADO.Net  
Sql Server  SharePoint  Silverlight  Others  All   

Hall of Fame    Twitter   Terms of Service    Privacy Policy    Contact Us    Archives   Tell A Friend