.NET Tutorials, Forums, Interview Questions And Answers
Welcome :Guest
Sign In
Register
 
Win Surprise Gifts!!!
Congratulations!!!


Top 5 Contributors of the Month
Easy Web
Imran Ghani
Post New Web Links

Cannot login to Sharepoint 2010 central admin

Posted By:      Posted Date: September 03, 2010    Points: 0   Category :SharePoint
 
Hi Guys, I am relatively new to MOSS and have started investigating the product. I had MOSS 2010 fully funtioning in a test environment and had an issue with authentication. Each time a user accessed the site for the time, they would be prompted for a username and password. I then came across an article that indicated i should enable Kerberos authentication in Central Admin. I did this but once the configuration completed i could no longer access Central admin. The normal site sites are available and functioning. What could the issue be? thank you,


View Complete Post


More Related Resource Links

SharePoint 2010 Central Admin error

  
I'm having problems when I open certain things up in Central admin To name a couple each time I open backup or Configure service accounts I get this The specified user or domain group was not found. Troubleshoot issues with Microsoft SharePoint Foundation. Correlation ID: c9e3eb26-45d8-4f17-985b-54bb178d3184 Date and Time: 7/9/2010 4:51:03 PM For the most part almost everything works in Central admin but for some reason there's a few things that keep throwing this error. Any ideas? Thanks

cannot login to Central administration sharepoint 2010 - please help URGENT

  

I am not able to login to sharepoint administration, with farm admin, local admin, accounts, all logins are rejected, i recieve a page not available message.

I have run Psconfig, did not work.

I have even repaired the sharepoint 2010, (renamed 14 folder before repairing), This server is development box.

I have the option of fresh sharepoint 2010 install, I have around 8 sites, How do i attach the old sites back to new install.

I have used alrenate access mappings, is that causing issues.

This problem started when i installed a vendor product, Sharepoint informed me that premiumsite feature is not installed, I went ahead and installed premiumsite for the collection, then CA went down.

I am not sure, if it is sharepoint issue or iis issue, In the mean time, i have uninstalled the vendor product which was causing the issue

Please help me to revive the central admin

Thank you neel


SharePoint 2010 Central Admin--Create/Extend Web Application button on Ribbon are disabled

  

My Dev Environment is  SharePoint 2010 on WIN 7. I have 2 users

1) Built in Administrator- Member of FARM Administrator

2) Dinesh02\Dd – Also member of FARM Administrator

Now when I Sign-in with my account and use Manage Web Application link, on the Top Ribbon none of Button is enabled. I can not create Web APP nor Extend it.  When I select web application from list, some button are enabled but not all. Also I can see role as Contributor

This does not happen When I sign-in with Built-in\Administrator account.


SharePoint Designer still shows in Sites after i disabled it in Central Admin - SharePoint 2010

  
Is there a way to remove SharePoint Designer from the Ribbon in document libraries or even in the Site Actions > Edit in SharePoint Designer. The business wants that removed.

Luis A Segura

SharePoint Designer still shows in Sites after I disabled it in Central Admin - SharePoint 2010

  
Is there a way to remove SharePoint Designer from the Ribbon in document libraries or even in the Site Actions > Edit in SharePoint Designer. The business wants that removed.

Luis A Segura

SharePoint 2007 Central Admin - blank page, isapimodule error in IIS

  

I've got a Windows 2008 SP2 server runing x64.

When i try to access the SharePoint Central Admin site, I just get a blank page. No errors in the Windows logs, nothing showing up in the SharePoint logs. The IIS log shows a 500 error.

I enabled Failed Request Tracing for the 500 status code, which gives me the following information:

ModuleName IsapiModule

Notification 128

HttpStatus 500

HttpReason Internal Server Error

HttpSubStatus 0

ErrorCode 2147942593

ConfigExceptionInfo 

Claims Walkthrough: Creating Trusted Login Providers (SAML Sign-in) for SharePoint 2010

  
Learn how to create a custom security token service (STS) and set up a trust relationship between a SharePoint 2010 farm and the custom STS

Failed to change Farm Account in Sharepoint 2010 server, now Central Administration is not accessibl

  
Hello, I have a problem, that I no longer can access Central Administration Website, only the Sharepoint itself. I was running installation of Sharepoint 2010 Server with administrative account ImTheAdmin, who is a Domain Admin in the domain on one of the Windows 2008 R2 member servers. Besides that, I made ImTheAdmin the primary administrator of the Sharepoint. ImTheAdmin became the only user of this Sharepoint 2010 server after installation.  I installed everything on one box with default installation settings. I used builtin SQL server, not Standard or Enterprise. What then happened is: Using ImTheAdmin account, I opened Central Administration Website, and it said, that I need to change the Farm Account, for the account for Farm was the default one (I think it was network service). So I created a regular domain user MYDOMAIN\SharepointFarmAccount. The account name was too long to be as a Windows 2000 name, so it showed there without last 't', e.g. MYDOMAIN\SharepointFarmAccoun. I thought, Windows 2000 is long gone, so I didn't pay much attention, I think everywhere the account SID is important. I don't know if that is the real problem with my failure later, but it might be one of the reasons. I put MYDOMAIN\SharepointFarmAccount down in to the form of Central Administration Website, added the check mark, that it would react to password changes, and pre

problem rename sharepoint 2010 search service application admin database

  
Hi all, i have a problem that hopefully someone has an answer to.  i am not too familiar with sharepoint so please excuse my ignorance. we have sharepoint 2010 on a windows 2008r2 server.  everything seems to work fine.  but as you know, the default database names are horrendous.  i have managed to rename all of them, except for the "search service application" admin database. the default is: Search_Service_Application_DB_<guid> the other 2 databases (crawl and property) were renamed without a problem. we are following the article from technet on how to rename the search service admin db (http://technet.microsoft.com/en-nz/library/ff851878%28en-us%29.aspx).  it says to enter the following command: $searchapp | Set-SPEnterpriseSearchServiceApplication -DatabaseName "new database name" -DatabaseServer "dbserver" however, i get an error about identity being null.  no big deal, i add the -Identity switch and the name of my search service application.  but the real problem comes the error it throws:   Set-SPEnterpriseSearchServiceApplication : The requested database move was aborted as the associated search application is not paused. At line:1 char:54 + $searchapp | Set-SPEnterpriseSearchServiceApplication <<<<  -Identity "Search Service Application" -DatabaseName "ShareP

SharePoint 2010 AD FS 2.0 Integration - login works then fails, looping back to the adfs server

  
Hello, I setup SharePoint 2010 Claims auth with AD FS 2.0 following this post: http://blogs.technet.com/b/speschka/archive/2010/07/30/configuring-sharepoint-2010-and-adfs-v2-end-to-end.aspx.  I have no access to the ADFS server, but I think they followed the steps as outlined.  If I do an iisreset (or just recycle the app pool of the SharePoint site) I can login successfully using the remote credentials.  Also I can under security in SharePoint search for and find users and roles from the remote ADFS server. If I close my browser, open a new browser and go to the site I am prompted to login again (this is fine).  I do, using the same credentials, and the login fails because I am redirected between the SP and ADFS servers until the ADFS server stops the redirecting.  I have been doing some digging and I found this post: http://blogs.technet.com/b/speschka/archive/2010/08/09/setting-the-login-token-expiration-correctly-for-sharepoint-2010-saml-claims-users.aspx, which describes the situation I have in point # 3 at the bottom.  I have tried setting the token time out as low as 1 second but this hasn't helped. I have also, just to see, tried setting all the other lifetime settings to 1 second - but no luck.  Because the initial login works I think the setup is correct, but something is maintaining some state that is causing the loop

SharePoint Search Server 2010 Express returns no search results for non-admin users

  
This is going to sound crazy, but anyway... bare with me... I have a SharePoint Search Server 2010 Express (RTM) installed with a crawl account (call it sharepoint_crawl) which has full read permission to an entire site collection of 100,000 documents. I have logged in with this account to make sure it has read access to everything, and it does. I run a full crawl of all documents and allow it to finish. If I try and search the content for an extremely common term (i.e. 50,000+ hits) I get no results. However, if I log in with a site collection admin I do get search results. There are no indexing errors or query errors in either log files or event log. Everything looks like it is working correctly - just no results for non-admins Anyone tripped on this? I have recreated the crawl account and perform a full re-index with the same results. What gets me is that the crawl account does have read permission to the content it is indexing, the content is indexed correctly, but the crawl account cannot get results back. It is as if security-trimming is removing everything. Any ideas?

Installing SharePoint 2010 with SQL Server 2008 - SQL Exception - Login Failed

  
Hello I've been trying to install SharePoint 2010 with SQL Server 2008 in my Windows Server 2008 R2 box. I've got the same error all the times. System Specifications Windows Server 2008 R2 SQL Server 2008 with SP1 SharePoint 2010 Enterprise 6GB RAM, 320GB HDD Installation Steps I followed Installed Windows Server 2008 R2 and joined it to our domain Logged in as domain administrator Installed SQL Server 2008 Selected the Local Service account for all the SQL Server 2008 services during installation Selected Mixed mode authentication Selected 'Add Current User' in all the other installation screens Installed SQL Server 2008 SP1 Installed SharePoint 2010 Selected Farm option Selected Complete Installation Tried to run the configuration wizard and got sqlexception error - login failed But i checked that the current user (domain admin) is having all the permissions. Also added the domain admin as Security Admin and DB Creator in SQL Server instance. Any ideas?  Regards NLV Visit SharePoint User group - India

SharePoint 2010 organization installation without access to Central Administration?

  
Our organization of 5000+ internal users and 1000 external vendors wants to integrate SharePoint 2010. We are are being mandated to use an offering of SharePoint 2010 in the cloud. All peer organizations are also being told to use this service, and we are all going to be on a single SP farm. We want to have several internal site collections, customization of MySites, an extranet, and a public facing site. We will not have the ability to access central administration ourselves, we have to go through a centralized state IT department and have them make changes for us. We will only have admin abilities for our own site collections. Installing 3rd party web parts will be a nightmare process as well as making small changes to central admin resources as we are dependent on their time-line to test and integrate these for us. What issues are we likely to see because of this, and is this even a feasible option for us? BTW, they do not uphold SLA agreements and currently they sometimes take days or weeks to fix issues, where our people would take care of it in hours if possible.

Cannot Login with Forms Based Authentication to SharePoint 2010 - Issue with the SecurityTokenServic

  
Please be advised I have followed the steps on http://donalconlon.wordpress.com/2010/02/23/configuring-forms-base-authentication-for-sharepoint-2010-using-iis7/. I have tried to fix the following issue for a week using different farms and SharePoint 2010 installations, however I am getting the following error when trying to authenticate using Forms Based into a Claims site: Cannot get Membership Provider with name FBARoleProvider The membership provider for this process was not properly configured. You must configure the membership provider in the .config file for every SharePoint process. 1. I am certain the membership provider is configured in the SecurityTokenServiceApplication webservice as I can manage users and roles in IIS7 using the SecurityTokenServiceApplication website. 2. I am certain that membership provider is configured in the both the Claims Web Application and Central Admin as I can manage users and roles in IIS7 using their websites. 3. I know the issue is the SecurityTokenServiceApplication service as I had to set <serviceDebug includeExceptionDetailInFaults="true" /> to get the error above. 4. I can log into the Claims Based Application using windows authentication, however I am unable to see the users on the people picker despite that I can see them from the application's site on IIS

SharePoint 2010 Central Administration - Not started

  
Helllo I was installed Sharepoint Server 2010 in Windows Server 2008 R2, but when I start first the Share Point 2010 Central Administration, in the internet explorer browser, the system try setup connection to http://win2008server:23559/, but the outpot that i get is the following: El URL solicitado no se ha podido conseguir Mientras se intentaba traer el URL: http://win2008server:23559/ Ha ocurrido el siguiente problema: Incapaz de determinar la dirección IP a partir del nombre de la máquina: win2008server El programa dnsserver ha devuelto el siguiente mensaje: Name Error: The domain name does not exist. Esto significa que: El caché no ha sido capaz de resolver el nombre de máquina presente en la URL. Compruebe que la dirección sea correcta. Generated Wed, 15 Sep 2010 02:26:15 GMT by proxy2 (squid/2.6.STABLE14) any of you could help me? Thanks for your cooperation !

SharePoint 2010 Central Administration - Not started

  
Hello I was installed Sharepoint Server 2010 in Windows Server 2008 R2, but when I start first the Share Point 2010 Central Administration, in the internet explorer browser, the system try setup connection to http://win2008server:23559/, but the outpot that i get is the following: El URL solicitado no se ha podido conseguir Mientras se intentaba traer el URL: http://win2008server:23559/ Ha ocurrido el siguiente problema: Incapaz de determinar la dirección IP a partir del nombre de la máquina: win2008server El programa dnsserver ha devuelto el siguiente mensaje: Name Error: The domain name does not exist. Esto significa que: El caché no ha sido capaz de resolver el nombre de máquina presente en la URL. Compruebe que la dirección sea correcta. Generated Wed, 15 Sep 2010 02:26:15 GMT by proxy2 (squid/2.6.STABLE14) any of you could help me? Thanks for your cooperation !

How to create a login forms in sharepoint 2010 using designer

  

Hello friends,

                  I am mohammad siddiqali new to sharepoint  ,I need to know how to create a login form for a sharepoint 2010

Thanks,

MD.SIDDIQALI


Mohammad Siddiqali
Categories: 
ASP.NetWindows Application  .NET Framework  C#  VB.Net  ADO.Net  
Sql Server  SharePoint  Silverlight  Others  All   

Hall of Fame    Twitter   Terms of Service    Privacy Policy    Contact Us    Archives   Tell A Friend