.NET Tutorials, Forums, Interview Questions And Answers
Welcome :Guest
Sign In
Win Surprise Gifts!!!

Top 5 Contributors of the Month
Gaurav Pal
Post New Web Links

is SQL 2000 32 bit supported on Windows 2008 R2 64bit?

Posted By:      Posted Date: September 02, 2010    Points: 0   Category :Sql Server
Question as stated. Could anyone provide an official source from MS, wether is supported or not supported. Really appreciate it.

View Complete Post

More Related Resource Links

Does SQL server 2000 database supported on Windows Server 2008?

Does SQL server 2000 database supported on Windows Server 2008 and Windows Server 2008 R2?

Error while trying to register DLLs for Microsoft Jet on Windows Server 2008 R2 64bit

Hello! I'm having issues with importing Excel spreadsheets into Microsoft SQL Server 2005 on a Windows Server 2008 R2 64bit server.  After browsing the web, it appears that the problem is with the DLL's used by Microsoft Jet.  I've thus attempted to re-register these DLL's.  However, I am receiving the following results. c:\Windows\SysWOW64> regsvr32 c:\Windows\SysWOW64\msjetoledb40.dllSuccessful c:\Windows\SysWOW64> regsvr32 c:\Windows\SysWOW64\msjet40.dllSuccessful c:\Windows\SysWOW64> regsvr32 c:\Windows\SysWOW64\msjint40.dllThe module "msjint40.dll" was loaded but the entry-point DLLRegisterServer was not found c:\Windows\SysWOW64> regsvr32 c:\Windows\SysWOW64\msjter40.dllThe module "msjter40.dll" was loaded but the entry-point DLLRegisterServer was not found c:\Windows\SysWOW64> regsvr32 c:\Windows\SysWOW64\msjtes40.dllSuccessful c:\Windows\SysWOW64> regsvr32 c:\Windows\SysWOW64\mswstr10.dllThe module "mswstr10.dll" was loaded but the entry-point DLLRegisterServer was not found I've set the application pool for this site to use 32bit.  Please note that due to my role on the team, other options such as using ACE are not available to me, unless I can prove that I've exhausted all other options. Thoughts? Thanks,Mike

SS2008 Supported on Windows Server 2008 Small Business

I am planning to install Sql Server 2008 x64 on Windows Server 2008 x64. My question : Is it only SqlServer2008 Standard Edition x32 supported on SBS2008? I checked the chart of the SW requirements and I am not sure about it.

Are nested Windows groups supported as SQL Server 2008 logins?


I am attempting to configure a new SQL Server 2008 instance to use Windows authentication, and am encountering a problem when adding Windows domain groups as logins. Specifically, Windows users who are direct members of a Windows group that has been added as a login behave normally. Users who are members of groups that are, in turn, members of other groups which have been added as logins are unable to connect.

In a simplified example, consider the following:

Group: MYDOMAIN\DataViewers
  Member: MYDOMAIN\Hazel
  Member: MYDOMAIN\Seamus

Group: MYDOMAIN\DataEditors
  Member: MYDOMAIN\Vaughan
  Member: MYDOMAIN\Liesel

Group: MYDOMAIN\AllUsers
  Member: MYDOMAIN\DataViewers <-- This is a group
  Member: MYDOMAIN\DataEditors <-- This is a group

If I add the MYDOMAIN\AllUsers group as a SQL Server login (and map it to some databases), none of the end users (i.e. Hazel, Seamus, Vaughan, Liesel) can connect. If I add the MYDOMAIN\DataViewers or MYDOMAIN\DataEditors groups as logins, though, their members can connect. Similarly, if I add an end user directly to the AllUsers group, they can connect normally.

It appears as if the nested group model I had envisioned is not supported in SQL Server 2008, but I have been unable to find any documents that state this conclusively. Therefore, my q

Help deploying Windows Service to 64bit Server usinf Visual Studio 2008 Setup Project?

I have a Windows Service I created a while back for our Win2003/2008 32bit Servers, written in Visual Studio 2008, deployed via a VS2k8 Setup Project.  Everything works great, installs fine, and runs as it should.  There is no platform dependent code, it's all straight-up .Net Framework stuff, so we thought it should deploy to a Win2008 64bit Server just fine.  But this seems not to be the case.

When I try to install the Service as is on the 64bit machine, the service and associated DLL's are installed to the "C:\Windows\SysWOW64" folder, but when you right click the Service itself and look at the properties, it is trying to find the .exe file in the "C:\Windows\System32" folder. This difference prevents the service from running, obviously.

If I change the Setup Project settings, set the Target Platform to "x64" and change in the File System screen to use the "System (64-bit) Folder" placing the files in there and re-run the setup.exe on the server.... now the files are correctly installed to the "C:\Windows\System32" folder, but the Service itself is not 'installed', that is it *does not* show up in the Services Manager.

Just for the giggles of it I tried to manually install the service using 'installutil.exe' in the .Net Fra

SQL 2000 on Windows Server 2008

Hi i need help configuring SQL 2000, i want to know if its possible to run SQL with AWE in windows server 2008, so it can use 8 Gb of RAM, thanks

VisualStudio 2008 64bit in windows 2008 r2 64 bit oracle does not connect to databas



I am currently using visualstudio 2008 with 3.5 framework sp1 release.

We want to migrate our applications to the new server everything as a 64 bit. which is having the following configuration 

windows 2008 server  R2 64 bit with Oracle as backend.

We donot have any 32 bit oracle client tools installed.I am able to connect to the database by using a console/windows/class library applications

When I try to simply connect to the database(open and close the connection) using either a website or a webapplication.I am getting the following different types of exceptions

Oracle client and networking components were not found. These components
are supplied by Oracle Corporation and are part of the Oracle version
7.3.3 or later client software installation.

Provider is unable to function until these components are installed.
Attempt to load Oracle client libraries threw BadImageFormatException.
This problem will occur when running in 64 bit mode with the 32 bit
Oracle client components installed.

Sql Server 2008 (64bit) on Windows Server 2008 with a connection to Oracle 10g (64bit)



I know there are similar questions posed but none that provided a solution to my particular problem.

I am upgrading a SSIS package from Sql Server 2005 (32bit) to Sql Server 2008 (64bit) on Windows Server 2008 R2. It worked on the Sql Server 2005 machine. This package connects to an Oracle 10g (64bit) database.

The Oracle 11g client and networking tools are installed (by the Oracle DBA). I tested my connection on the sql server 2008 machine using SqlPlus and doing a tnsping. I can also create a Windows ODBC datasource connection to the Oracle 10g database.

The package executes properly on my local computer XP (32bit) running bids 2008.

The package fails on the server in SSIS. I need to be able to schedule the package in a job so it must run in SSIS.

I have also tired to create a connection manager to the Windows ODBC oracle connection without success. It is blank and does not allow me to select or refresh to view the Windows ODBC datasources.

Any assistance would be greatly appreciated. I have seen other forums where installing the Oracle 11g ODAC and Oracle Developer Tools for Visual Studio might assist in creating the package. But I need assistance in running the package from SSIS and not BIDS.






MOSS2007 (64Bit), Windows Server 2008 (64Bit) & Crystal Reports 2008


Hi guys,

at the moment i stuck at the following problem:
I try to call a Crystal Report (designed with Crystal Reports 2008 SP3) from my SharePoint aspx-page. In my 32-Bit Development-Eviroment everything works fine, but now i'm trying to deploy the solution to a MOSS207 64-Bit enviroment (Windows Server 2008 64Bit, IIS7, MOSS 64Bit).

When i try to call the report i get the following error message:
Exception Details: CrystalDecisions.CrystalReports.Engine.LoadSaveReportException: An error has occurred while attempting to load the Crystal Reports runtime. Either the Crystal Reports registry key permissions are insufficient, or the Crystal Reports runtime is not installed correctly. Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://www.businessobjects.com/support for more information.

I've asked SAP for a solution of this problem and got back two possible ways to solve this problem:
1. Compile the application in 32-Bit mode -> this does not work with SharePoint (Error: Can't find assambly)
2. Run the Web Application in 32-Bit mode -> this does nit work with SharePoint (In

Windows Server 2008 32 and 64bit and Active Directory


By any chance do you if it is recommended to have Sharepoint 2010 and
Active Directory on the same windows 2008 server? Or they have to be on separate servers?

Also, do you know if Windows 2008 32 bit have any conflict communicating
with Windows server 2008 64bit?




WSS 3.0 seach fail after migration from Windows Server 2003 with SQL 2000 to Windows Server 2008 wit


Hello we have a WSS 3.0 on a Windows Server 2003 with a single site, and we are trying to migrate it to another server with Windows Server 2008. All database are on a Microsoft SQL Server 2000.

We installed WSS 3.0 from scratch on the new server. We put the default databases on a server with Microsoft SQL Server 2008.

Then we made a backup in the production server with the following command: stsadm -o backup -url https://portal -filename musa.bak

After that we restored the backup in the new server with the following command:  stsadm -o restore -url https://uymvd18 -filename c:\sharepoint\portal-2010-10-05-21-00-06.dat -overwrite

(portal is the name of the old server and uymvd18 is the name of the new one)

Everything worked ok, but the when we try to do a search in the new se

SQL Server 2005 on Windows 2008 R1/R2 64bit



Please advise where can I find the product compatibility matrix for SQL Server? I need to know if SQL Server 2005 (64bit) is certifed on Windows server 2008 R1/R2 (64 bit).



How to Import Excel Data into SQL Server 2008(64 bit) Using SQL Query (in Windows Server 2008 64bit

I am developing VB .Net application in Visual Studio 2008(64bit), SQL Server 2008(64bit) and Windows Server 2008(64bit) environment.

I need to import an Excel and Flat files data into SQL Server database using SQL Query. I tried a lot with the following SQL Queries directly with SQL Server Management Studio,

1. SELECT * INTO  dbo.ExcelImportTest FROM OPENROWSET('Microsoft.Jet.OLEDB.4.0','Excel 8.0;Database=D:\PTPLDCT\DCT Test Datasource\DCT_Excel_Test_Sample_1.xls',
'select * from [Sheet1$]')

While executing i got an error as below,

Msg 7403, Level 16, State 1, Line 1
The OLE DB provider "Microsoft.Jet.OLEDB.4.0" has not been registered.

2. I have also tried with MSDASQL provider,

Select * from openrowset('MSDASQL','Driver={Microsoft Excel Driver (*.xls)};
Dbq=DCT_Excel_Test_Sample_1.xls;DefaultDir=D:\PTPLDCT\DCT Test Datasource\', 'Select * from [Sheet1$]')

Then i encountered the following error,

OLE DB provider "MSDASQL" for linked server "(null)" returned message "[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified".
Msg 7303, Level 16, State 1, Line 1
Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "(null)".

3. Finally i have tried the Query with Linked Server,

EXEC sp_addlinkedserver @server = '

Migrating from MSDE 2000 to SQL Server 2008 R2 in Windows 7

I need to duplicate the parameters in Windows XP MSDE 200 in a Windows 7 environment running SQL Server 2008 R2 for a desktop engine. Can any one help?

Word Automation Issue in Windows Server 2008 Hosting



The problem I am posting here is that I was facing nearly 2 weeks around. Any body comes with this stuff please help.

Word Automation in sample ASP.NET(C#) application.

I am using Microsoft.Office.Inetrop.Word Assembly for automation. Here I am reading a XXX.dot template file and fill the contents with dynamic data.

When i am executing my code in localhost:someportnumber the automation is working fine and I could get expected result and when I am hosting in my inetmgr(Windows XP is my OS) it is also working fine.

But the problem is that when I am hosting in my production server(Windows Server 2008 Standard Edition) I am not able to perform automation and results in the following error.

Data: System.Collections.ListDictionaryInternal
Message: Word has encountered a problem.
Source: Microsoft Word

The code gets failed in the following line:

ApplicationClass wordApp = new Microsoft.Office.Interop.Word.ApplicationClass();

Document wordDoc = wordApp.Documents.Add(ref oTemplate, ref oFalse, ref oMissing, ref oMissing); // Error in this line

I cannot able to proceed further. Can anybody please help me in solving this issue?

Thank you.

With Regards,


No ASPNET User in Windows Server 2008?


I have been looking everywhere online regarding this, but have not found a clear answer.


I have an ASP.Net app running on Windows Server 2008, it's basically a reporting app using Crystal Reports. I have encountered a roadblock in regards to rendering some pages. When I run the app in Visual Studio(on the same 2008 machine) everything works perfectly. Yet when I publish it and run it live the reports will not display correctly, I get a message saying Failed to render page.


I looked this error up in the Crystal Reports website and the fixes they have there refer to giving the windows "aspnet" user full access rights to certain folders on the machine. I would be happy to do this, however there is no aspnet user in Windows Server 2008.


I installed the server and set its role to be Web Server. I also checked all the options regarding ASP.Net and IIS 6 compatibility. Yet there is no ASPNET username anywhere.


Did I set the server up wrong? or do I have to do something within ASP.Net to  create this user and then give it rights? 

Not working on Windows Server 2008




I had the CSS friendly adapters working great on our old server (windows server 2003 - 32bit) and now we have moved to a 64 bit environment and now I can not get the CSS friendly adapters to work.

We are using SharePoint 2007.

Is there another work thru for 64bit environment.

I notice windows server 2008 has a directory  C:\Windows\Microsoft.NET\Framework64 would I be using the browser file in this directory???

Please help!

ASP.NetWindows Application  .NET Framework  C#  VB.Net  ADO.Net  
Sql Server  SharePoint  Silverlight  Others  All   

Hall of Fame    Twitter   Terms of Service    Privacy Policy    Contact Us    Archives   Tell A Friend