.NET Tutorials, Forums, Interview Questions And Answers
Welcome :Guest
Sign In
Win Surprise Gifts!!!

Top 5 Contributors of the Month
david stephan
Gaurav Pal
Post New Web Links

execute sql task vs data flow task

Posted By:      Posted Date: September 02, 2010    Points: 0   Category :Sql Server
My manager has asked me to use linked server to connect to ORACLE database rather then oledb   my source db is ORACLE and my Distination is SQL server 2005 ( in 64 bit  windows server) I am planning to write this query in an execute SQL task, INSERT  dbo.MV_MAX (PERIOD                                 ,PRODUCTGROUPID                                 ,PRODUCTID                                 ,SUBPRODUCTID                                 ,HLBER_ID                                 ,BE_ID                                 ,ENTITYID                             &n

View Complete Post

More Related Resource Links

How to programmatically execute data flow task whose destination is a data reader


Hello everyone

There is a SSIS package containing (among other executables) a data flow task which writes a string to a DataReader Destination. I need to execute just that data flow task and read the string from DataReader Destination programmatically.

I can run the whole package from C# and then read the value. Also the data flow task in question must be embedded in the package.

Does anyone know how to do this?

How do I add two XML tasks to a Data FLow task?

I am new to SSIS and am developing a package which takes input from an XML file and then populates an existing SQL table with these records.  However, this is a very large XML file.  I keep getting an Out of Memory exception.  (This file is 210 MB)!  So what I tried doing was separating this XML file into 8 smaller files.  Now, I can successfully load data from these smaller files one at a time.  But how can I do all of them in the same package?  I connected two XML tasks to the Data Flow task and get the error below.  I also increased my timeout and number of errors to no avail.  Advice? Error: 0xC002F304 at XML Task 1, XML Task: An error occurred with the following error message: "Exception of type 'System.OutOfMemoryException' was thrown.". Task failed: XML Task 1 Warning: 0x80019002 at zSkywardEnrollment: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. Error: 0xC002F304 at XML Task, XML Task: An error occurred with the following error message: "Exception of type 'System.OutOfMemoryException' was thrown.". Task failed: XML Task SSIS package "

How to detect that a Data Flow Task has failed (from inside a custom componet)

Hi, in the PostExecute Method of a custom component i would like to check if the Data Flow Task has been failed. Is that possible? Also it would be great to be able to check if this custom component already got all data or has been marked as "green".  Thanks, Dennis

Data flow task with multiple destinations randomly hangs

I have a package whose control flow consisting of a single data flow task with multiple destinations continues to hang at random locations.  The data flow task is fairly simple: - One OLE DB source (one query of selecting about 10 fields from one table) - 9 lookups that serve basically as left joins to capture which data "drops off" (does a row redirect on on lookup errors to an "error flow") - Two destinations: one the captures all the data that doesn't drop off from the lookups, and another to capture the data that does drop off; these write to two tables unrelated to each other, and unrelated to any of the tables I'm reading from I have tried the following: - Changed one or both destinations from OLE DB to flat file -- still randomly hangs - Removed both destinations altogether -- this always suceeds.   - Removed destination A and leave destination B -- this always succeeds - Removed destination B and leave destination A -- this always succeeds I took great care in making sure I get no warnings when the package runs, even resolving the unneeded column warnings, and the duplicate keys on all my lookups, but it still hangs. However, once I give up and stop the package, the following error is thrown (among others that appear to be a byproduct of the root issue): Error: 0xC02020C4 at Data Flow Task, OLE_SRC AP12 [1]: The attempt to

Error in Script component in the Data Flow Task

Hi, I need a small help. This is what i require. I need to generate a auto increment number using script component and assign it to target column. use db1 go create table src (name varchar(10) ) insert into src select 'A' union all select 'B' union all select 'C'   create table trg (id int, name varchar(10) ) while loading the trg table, i need to generate a auto increment number and then load it to target. Finally, my trg table data should look as follows id name 1  A 2  B 3  C This is what i have done inside the package. step1 : declared a global variable "tmp" of int32 step2 : created a connection manager pointing to "db1" database step3 : drag n drop data flow task step : inside the data flow task , i have the following        OLEDB Source  (select name from src)           |        Script Component (i have added a new Output column "v_id" of int datatype in INPUTS AND OUTPUTS page)           |        OLEDB Destination In the Script page in Script component , in ReadWriteVariables | User::tmp, I have chose Visual Basic 2008 and clicked the EDit script and inside the Editor this and inisde the below routine i have added only two

Error: The task with the name "Data Flow Task" and the creation name "DTS.Pipeline.1" is not registe

Hi, I am trying to create a simple BI Application for SSIS. In Visual Studio 2005 I just get a Data Flow Task from the toolbar and add it to the project. When I double click it I get the following error: The task with the name "Data Flow Task" and the creation name "DTS.Pipeline.1" is not registered for use on this computer. Then when I try to delete it it gives this other error: Cannot remove the specified item because it was not found in the specified Collection.  I am creating this application in an administrator account in this computer, so I doubt the problem is related to permissions. I am running SQL Server 2005 and Visual Studio 2005 in WinXP Tablet PC Edition. Any suggestions why this is happening and how to fix it?

Populate a Data Flow Task's variables with values from a .dtsConfig file?

I have an SSIS Project to import exchange rates from an XML file into SQL. The project works when I have certain values hard-coded into variables, such as the URL of the XML File, proxy username and passwords etc. I decided to put in a .dtsConfig file, and have it update the values of the variables in the data flow task. So, one of my SSIS Packages in this solution is called ECBDailyRates.dtsx. It contains one control flow, which is a data flow task. The data flow task is a script task which does some XPATH on an XML file, and then provides outputs to an OLE DB Destination, which in turn puts the data into a table in SQL. That much worked before I put in the dtsConfig file. There are a few variables declared inside the data flow task, such as; PricesXMLUriDaily, String ProxyAddress, String ProxyAddressPort, Int32 etc. etc. These are now being updated from the dtsConfig, which is below. It was my understanding that SSIS would run through the config, and update any of the variables as required, and then run my data tasks. However when SSIS runs my script task, none of the variables have been populated, and so it falls over... as it were :) <?xml version="1.0"?> <DTSConfiguration> <DTSConfigurationHeading> <DTSConfigurationFileInfo GeneratedBy="...." GeneratedFromPackageName="dim_Institution" GeneratedFromPackageID="

Can't make parameterized query work in data flow task


I have an OLE DB source in a data flow task.  The connection is pointing to a SQL Server 2008 instance.  My SQL works fine when I click the preview button.  Now I need to make it parameterized by adding a question mark in my where clause.  After doing so & clicking the Parameters button, I get the error described in this post .  When I try to do what's described therein to correct the problem (click the "build query" button), I get the error "The PIVOT SQL construct or statement is not supported."

I can't make this query an expression; it's simply too complex to maintain that way (besides, just pasting it into an expression builder window and trying to evaluate as is doesn't work - can't evaluate).

So the question is, how do I parameterize a query?  And why does SQL here work so radically differently from SQL in an execute SQL task?

Is there any Data Flow Task in SSIS to merge 3 different recordsets (from 3 different tables) and se

I have a requirement, that has 3 different Execute SQL Task that returns 3 different recordsets which differ from each other.  I want to know whether these 3 recordsets can be sent as Input to a Script Component.  I know that Script Component accepts only 1 Input... But is there any way, to have this done

need hint for ssis data flow task...



In my project, i have two data sources tables lets say oledb1 and oledb 2 in data flow task.

i want to load the data into destination (oledb3) by using the following logic...

select col1, col2, col3 from oledb1 where col1 not in (select col1 from oledb2);

Please help me...



Data Flow Task failing to drag-and-drop onto SSIS Control Flow

This morning, I started having problems with Visual Studio 2005 on XP when I tried to create an SSIS project; I was getting an error message about the failure to create an SSIS runtime object, with the reference "Unable to cast COM of type 'Microsoft.SqlServer.DTS.Runtime.Wrapper.PackageNeutralClass' to interface type". Digging here and elsewhere on the Net, I used regsvr32 to re-register msxml3.dll, msxml6.dll, and dts.dll. This allowed me to create a new SSIS project, but I was unable to add a data flow task to the Control Flow pane -- when I dragged the control onto the pane, nothing happened, and when opened the Data Flow pane and clicked on the 'No data flow task has been defined. Click here to create a data flow task" link, I got a 'Failed to create the task. The designer could not be initialized." error. Searching here and on the Net, I uninstalled and reinstalled the SQL Server 2005 workstation tools.

After doing this, I am still unable to create a data flow task by dragging the task out of the toolbox; the pointer assumes the right form for the drag-and-drop, as it does for other tasks, but when I release the mouse button, nothing happens. However, when I go to the Data Flow pane and click on the 'click here to create a new data flow task', it creates the task, and I am able to use copy-and-paste to make copies of the data flow task

Data flow task - performance issues


We recently migrated packages from DTS to SSIS 2008. However the performance seems to be drastically reduced (what was taking under 30 mins is now taking nearly 2 hrs)

On analysis we see that the degradation is mainly with the data transform tasks which load from flat file to sql server tables. (all other factors such as environment, etc are unchanged)

Any suggestion on how this can be improved?

Visual Studio 2008 crashes on SSIS Data Flow Task opening


Visual Studio 2008 crashes on SSIS Data Flow Task opening.
This is a random behavior on random SSIS packages on Data Flow Task opening on packages that I've finished developing last week. The packages does not executes with error.

Error Description from Event Viewer:
Faulting application devenv.exe, version 9.0.30729.1, stamp 488f2b50, faulting module msdds.dll, version 9.0.30729.1, stamp 488f2e31, debug? 0, fault address 0x00012b6a.

I'm runnig SSIS development against SQL SERVER 2008 ENT 64.

There is already a fix for this ?

My environment description:
Microsoft Visual Studio 2008
Version 9.0.30729.1 SP
Microsoft .NET Framework
Version 3.5 SP1
Installed Edition: Professional

Microsoft Visual Basic 2008 91605-270-4167253-60984
Microsoft Visual Basic 2008
Microsoft Visual C# 2008 91605-270-4167253-60984
Microsoft Visual C# 2008
Microsoft Visual Studio 2008 Tools for Office 91605-270-4167253-60984
Microsoft Visual Studio 2008 Tools for Office
Microsoft Visual Web Developer 2008 91605-270-4167253-60984
Microsoft Visual Web Developer 2008
Crystal Reports    AAJ60-G0MSA4K-68000CF
Crystal Reports Basic for Visual Studio 2008
KB944899, KB945282, KB946040, KB946308, KB946344, KB946581, KB947171, KB947173, KB947180, KB947180, KB947180, KB94

how to improve/optimize ssis pacakge data flow task


in my SSIS package, i have a Dataflow Task,

it reads data from text file and store into db table, in this data flow task i have only flatfile source and oledb destination nothing else (such as derived columns etc)

is there any way that i can improve the performance, each feeds has 13 columns with 70,000 rows in it

could you please tell me how to optimize this dfd step if exist any

thanks in advabce

Delimiter File Read Task Installer failed to show in SSIS Data Flow Items


I downloaded the Delimiter File Read and followed the instruction and installed it. The file is on the correct directory (>:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents) The file DelimitedFileReader.dll is there.

However, when I go to BI Development Studio and try to add the new task I can't see it in the SSIS Data Flow Items...it is not visible. Does anyone know why I can add/see it?



SSIS data flow task not loading all rows from sybase server



Using a data flow task I am trying to load data from a table in sybase server to sql server. There are approx 10000 rows in the sybase table, however for some reason which I am not able to find out, at random certain no of rows are getting inserted. e.g. in one run 800 rows then 200 rows etc.

Can somebody please guide me on this?

SSIS - Data Flow Task Reads Fast But Importing the Output,Update & Deleting Extremely Slow & runs lo


Good day, I need help please.

In my source I read about 4mil records in a matter of seconds But Importing the Output to the Same Table takes about an 1 hour to update.

My Source Read is the Same Table to which i'm Importing, Updateing,Deleting

Importing: Table Lock & Check Constraints are checked

Please any ideas & suggestions will be great.

Thank You

ASP.NetWindows Application  .NET Framework  C#  VB.Net  ADO.Net  
Sql Server  SharePoint  Silverlight  Others  All   

Hall of Fame    Twitter   Terms of Service    Privacy Policy    Contact Us    Archives   Tell A Friend