Win Surprise Gifts!!!
Top 5 Contributors of the Month
Post New Question
Subscribe to Forum
SQL Server 2008 installation stops
August 07, 2011
I still have a problem with installing SQL SERVER 2008 (express) on a WIN7(32bit).
I get the "unknown property" error and the installation is stopped.
None of the solutions i find online explains clearly the cause and the solution of the problem
Posted Date: August 08, 2011 Points: 20
STEP 1 : Copy the installation files
First off I'd recommend you copy the entire directory structure from the SQL Server 2008 installation disc to the C: drive of the machine you are going to install it on.
Although this means you need to grab a cup of coffee whilst it's copying, this has three advantages:
.It makes the installation process much faster than running it from CD/DVD once it gets started.
.It allows you to easily add or remove components later, without having to hunt around for the CD/DVD.
.If your media is damaged and a file won't copy, you get to find out now, rather than halfway through the installation.
STEP 2 : Setup.exe
Double click on the setup.exe file.
After a few seconds a dialog box appears:
This will disappear from the screen and then the main installation page appears:
STEP 3 : SQL Server Installation Centere
Click on the Installation hyperlink on the left hand side of the screen:
STEP 4 : SQL Server Installation Center
Click on the "New Server stand-alone installation" link on the right side of the screen:
The following dialog appears on the screen whilst the install program prepares for instalation:
After a minute or so (the timing will vary according to your system), the following screen appears:
STEP 5 (optional) :
If any checks have failed, click on the Show details button or "View detailed report link" to find out the cause, correct it, then click on the Re-run button to perform the checks again.
STEP 6 : Product key
If all checks have passed, click on the OK button. After a few moments, the option to select the edition and to enter the license key (or "product key") will appear. Note that the product key box may already be populated, depending on which edition you have. Don't enter the product key we've shown here, it won't work on your system!:
STEP 7 : License Terms
Enter the product key into the box, or choose the free edition if you're evaluating SQL Server 2008, and click on the Next button:
Click in the "I accept the license terms" check box, then click on the Next button again.
STEP 8 : Setup Support Files
The following screen appears; click on the Install button:
The following screen will appear whilst Windows Installer prepares itself for the installation. This will take a short while:
After 30 seconds or so the dialog appears again:
STEP 9 : Setup Support Rules
If all is well, the following screen appears:
Click on the Next button again.
STEP 10 : Feature Selection
Select the features you want to install.
At a minimum, the following are useful (I'd argue essential), but what you need will depend on your needs:
Click on the Next button.
STEP 11 : Instance Configuration
After a short while the following screen appears:
For most installations, keep the default settings.
Click on the Next button.
STEP 12 : Disk Space Requirements
This screen just tells you if you have sufficient disk space on the drive you're installing to, and what's going to be installed where.
Click on Next.
STEP 13 : Server Configuration
This step allows you to set up the service accounts that will be used to run SQL Server. If you have created Windows NT or Active Directory accounts for use with services, use these.
If not, then just to get the installation up and working, use the built-in Network Service account for all three services listed (this account does not require a password).
This allows SQL Server to start up after installation. However, it can be easily changed later to another account through the Services applet (Control Panel -> Administrator Tools -> Services):
In addition, remember to change the Startup Type to Automatic, for all three services. This automatically starts the SQL Server database engine, SQL Agent and SQL Browser services when the server is re-booted.
The first service runs the SQL Server database engines executable process. The other two services allow scheduled jobs to run after installation (and after a re-boot), and allow the SQL Server to be found by clients on the network.
Do not worry about changing the collation tab, unless there is a specific requirement for anything other than the default collation sequence. Finally, click on Next.
STEP 14 : Database Engine Configuration - Account Provision
This screen allows you to set up database engine security.
Change the Authentication Mode to Mixed Mode unless you are certain you only need Windows-only authentication.
.Many third party applications rely on SQL Server logins to operate correctly, so if you are setting up a server for a third party application, rather than one developed in-house, enabling Mixed Mode authentication is a good idea.
If you pick Mixed Mode security, you must also enter a password for the sysadmin account (sa).
Enter and confirm a secure password for the sa account and keep it somewhere safe. Do not give it to any one you do not want to have access to the SQL Server.
Note that you MUST also provide a Windows NT account on the local machine as a SQL Server administrator. If you do not want Windows system administrators to be able walk up to the box and login to SQL Server, create a new, local, dummy Windows user and add this account instead. Otherwise, add in the local administrator account, or your own Windows account on the domain in which the SQL Server will reside.
STEP 15 : Database Engine Configuration - Data Directories
Click on the Data Directories tab.
Change the directories to specify which drives in your system will be used for the various types of database files.
Generally it's advisable to put the User database directory and User log directory on separate physical drives for performance, but it will depend on how Windows has been configured and how many disk drives you have available.
If you are installing on a single drive laptop or desktop, then simply specify:
Data root directory C:\Program Files\Microsoft SQL Server
User database directory C:\Data
User log directory C:\Logs
Temp DB directory C:\TempDB
Temp Log directory C:\TempDB
Backup directory C:\Backups
Do not click on the FILESTREAM tab unless you know you need to change these options, as it is not generally required for most installations, but can easily be changed by using sp_configure 'filestream_access_level', ''after SQL Server has been installed. Click on Next.
STEP 16 : Error Usage Reporting
This screen simply asks if you want to send error information to Microsoft and can safely be skipped if you do not want to share any information.
Click boxes if you want to help Microsoft help you.
Click on Next again.
STEP 16 : Installation Rules
This screen simply checks if there are any processes or other installations running which will stop the installation of SQL Server 2008.
Click on Next again - you're almost ready to install:
STEP 17 : Ready to Install
This screen summarises what you are about to install and gives you a last chance to cancel or change anything that's wrongly configured:
Check that what's being installed is what you want and then click on Install when you're sure you want to start the installation process:
SQL Server 2008 will now install. How long it takes depends on the speed of your machine, what load it's under, the installation media (CD is slower) and what you've chosen to install.
.More Installation Progress
... and Finally
Finally, the installation will complete:
...and the following dialog box will appear:
Click on OK, the machine will NOT reboot.
The following will appear:
Click on the Next button again...
STEP 18 : Installation Complete
The following screen appears:
It may be worth clicking on the installation log at the top of the screen to check everything's gone as expected. Not that this is MUCH smaller than the usual SQL Server installation log files of old.
Finally, click on the Close button. The following dialog will appear:
Click on OK - your server will NOT re-boot at this point.
The dialog box will disappear and you will be returned to the Installation Center:
Click on the Close button (the "x") in the top right of the screen.
Finally, manually reboot your machine to complete the SQL Server 2008 installation.
Top Tips :
How to check that SQL Server 2008 has installed correctly
Here are a short number of post-installation checks which are useful to perform after re-booting your new SQL Server. You don't have to run these, and there are other ways to check, but they are very useful for non-DBAs to be sure that the installation is basically sound and a connection can be made to the new SQL Server before handing it over to someone else.
Check 1: Has the SQL Server Service Started?
Check SQL Server 2008 has started.
Check 2: Does Management Studio Work?
Check Management Studio works by firing it up.
Click on NO when you see this dialog box:
Check 3: Can you run a basic query against the new SQL Server?
Check SQL Server works by running a simple query from Management Studio:
Enter the query shown below and hit F5 to run it:
Check 4: Is SQL Server Agent Running?
Check SQL Server Agent is running for scheduled jobs. There should be a green arrow next to the SQL Server Agent database symbol (it's small, you might have to look hard):
Check 5: Can SQL Server be seen from the Network?
Check that the new SQL Server can be seen from another SQL Server on the same domain by running isql -L (or osql -L):
If you can't see the new SQL Server in this list, check that the SQL Server Browser service is started on the machine where you have just installed SQL Server.
Check 6: Has the TCP/IP network protocol library been enabled on the server?
If the browser service is started but you still cannot connect to the server, click on Start ->Programs -> SQL Server 2008 -> SQL Server Configuration Manager (on the server where SQL Server's just been installed)
The SQL Server Configuration Manager window opens.
Click on the SQL Server Network Configuration node and expand it.
In the example below, we have MSSQLSERVER (a base instance of SQL Server), and SQLEXPRESS showing as installed.
If in doubt, click on Protocols for MSSQLSERVER.
In the above screenshot, the TCP/IP network protocol library is disabled. We need to enable it in order that remote servers can talk to the newly installed SQL Server.
.A word of explanation : In most installations, Named Pipes can be ignored, unless there is a requirement for it. In virtually all environments, VIA can also be ignored as this protocol requires a special network card. Shared memory is the "local" protocol that SQL Server uses when talking to a client application on the same server as itself, for example when SQL Server Management Studio connects to it. It is usually best to leave this enabled.
You will need the TCP/IP protocol enabled if you need to connect to your new SQL Server from a remote client or another server via TCP/IP, which is what most networks use.
If it shows as DISABLED (above), double click on the TCP/IP protocol line, and the following window will appear:
Ensure that Enabled is set to Yes, and click on OK.
The following warning will appear:
Click on OK, and you will be returned to the Configuration Manager window, where TCP/IP will now be shown as enabled:
Go back to the Services applet, and re-start the MSSQLSERVER service so that the TCP/IP protocol can be used to connect to your new SQL Server.
Then try to connect to it again from a remote machine.
If you have experienced problems with the previous connectivity tests, you should now be able to repeat at least some of them successfully.
Posted Date: August 09, 2011 Points: 20
Thanks & Regards,
Posted Date: August 15, 2011 Points: 20
Thank you for this detailled information.
In fact i'm trying to install the Express version. The installationprocedure is different.
I try to install the file SQLEXPR32_x86_ENU.exe (after downloading it).
I get the 'unknown property' error and the installation is aborted.
To post reply
Related Questions Related Questions
Unable to install BIDS 2008 during the installation of SQL server 2008
Upgrade from SQL Server 2000 to SQL Server 2008
Performing search on MS SQL Server 2008 database
Taking incremental backups from MS SQL Server 2008 Database
Copying Data from SQL Server 2008 to SQL Express
SQL Server 2008 - Table - Clarifications
How to install softwares on client computer from server computer in Visual Basic.Net 2008.
visual studio 2008 installation
sql server installation
What is the use of Row Constructor in Sql Server 2008?
Latest Forum Questions From The Same Category
Help to get SQL output
how to restore my sql database from my hosting provider?
SQL query to update date range
Add allowance to employee table is wrong or true according to my case
how to remove trailing zeroes in a decimal in sql server
Required Union All Result in two different column
Sql Multiple table data retrival
Table Translation records
How select huge Data from sql without take long time?
Passing using parameter in store procedure get the top3 record from the table
Find more Forum Questions on C#, ASP.Net, Vb.Net, SQL Server and more
Quick Links For Forum Categories:
Hall of Fame
Terms of Service
Tell A Friend